Dynamite Friction 4512-74094 Disc Brake Kit - Rear
Rear Brake Kit for Volkswagen Jetta and Audi TT
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74094, is a rear disc brake kit built for select Volkswagen Jetta and Audi TT applications. It combines coated rear rotors, ceramic brake pads, and matching hardware in one service package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-packaged rotors ready to install without cleaning oil residue
- OE-style rotor casting and machining for durability and stability
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is engineered for rear brake service on the Volkswagen Jetta and Audi TT. The coated rotor surface helps resist rust, while the machined finish supports quieter operation and consistent pad contact. The ceramic pad formulation is post cured and scorched to promote stable friction performance from the first stop. Part number 4512-74094 is a practical choice for drivers replacing worn rear brake components on a 1999-2015 Volkswagen Jetta or 2000-2006 Audi TT, depending on the exact brake configuration listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake noise, squeal, or vibration
- Rusty or worn rear rotors
- Uneven rear pad wear
- Reduced braking response from fatigued components
- Corroded or weakened brake hardware
Installation Notes
Compatible With select rear disc brake applications only. Verify rotor size, production date, and pad sensor configuration before ordering, especially on 2004-2005 Volkswagen Jetta models with specific rear brake setups. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub surface, inspect caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
Rear Brake Kit for Volkswagen Jetta and Audi TT
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74094, is a rear disc brake kit built for select Volkswagen Jetta and Audi TT applications. It combines coated rear rotors, ceramic brake pads, and matching hardware in one service package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-packaged rotors ready to install without cleaning oil residue
- OE-style rotor casting and machining for durability and stability
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is engineered for rear brake service on the Volkswagen Jetta and Audi TT. The coated rotor surface helps resist rust, while the machined finish supports quieter operation and consistent pad contact. The ceramic pad formulation is post cured and scorched to promote stable friction performance from the first stop. Part number 4512-74094 is a practical choice for drivers replacing worn rear brake components on a 1999-2015 Volkswagen Jetta or 2000-2006 Audi TT, depending on the exact brake configuration listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake noise, squeal, or vibration
- Rusty or worn rear rotors
- Uneven rear pad wear
- Reduced braking response from fatigued components
- Corroded or weakened brake hardware
Installation Notes
Compatible With select rear disc brake applications only. Verify rotor size, production date, and pad sensor configuration before ordering, especially on 2004-2005 Volkswagen Jetta models with specific rear brake setups. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub surface, inspect caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
Description
Rear Brake Kit for Volkswagen Jetta and Audi TT
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74094, is a rear disc brake kit built for select Volkswagen Jetta and Audi TT applications. It combines coated rear rotors, ceramic brake pads, and matching hardware in one service package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Dry-packaged rotors ready to install without cleaning oil residue
- OE-style rotor casting and machining for durability and stability
Product Details
The DFC GEOSPEC rotor and 5000 Advanced pad combination is engineered for rear brake service on the Volkswagen Jetta and Audi TT. The coated rotor surface helps resist rust, while the machined finish supports quieter operation and consistent pad contact. The ceramic pad formulation is post cured and scorched to promote stable friction performance from the first stop. Part number 4512-74094 is a practical choice for drivers replacing worn rear brake components on a 1999-2015 Volkswagen Jetta or 2000-2006 Audi TT, depending on the exact brake configuration listed in the fitment data.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Fix
- Rear brake noise, squeal, or vibration
- Rusty or worn rear rotors
- Uneven rear pad wear
- Reduced braking response from fatigued components
- Corroded or weakened brake hardware
Installation Notes
Compatible With select rear disc brake applications only. Verify rotor size, production date, and pad sensor configuration before ordering, especially on 2004-2005 Volkswagen Jetta models with specific rear brake setups. The rotors are shipped dry and ready to install, which can reduce prep time during service. For proper results, clean the hub surface, inspect caliper condition, and follow the vehicle manufacturer’s torque and bedding procedures.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for critical dimensions, and checked for balance on vented designs. The GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. DFC brake pads are post cured, scorched, and assembled with premium shims to support consistent friction and quieter operation.
