Dynamite Friction 4512-74086 Disc Brake Kit - Rear
Rear Brake Kit for Audi A6
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2002-2004 Audi A6. Part number 4512-74086 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner brake replacement.
Compatible With 2002-2004 Audi A6 rear brake applications, this kit is designed for drivers looking for OE-style fitment and consistent braking performance. The DFC 5000 Advanced pad formulation and GeoSpec coated rotor finish are aimed at stable stopping, reduced noise, and easier installation prep.
Key Features
- Part number 4512-74086 for rear brake service
- Fits 2002-2004 Audi A6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bedding
Product Details
DFC GeoSpec rotors are processed dry and ready to install, which helps eliminate the extra cleaning step often needed with oil-coated rotors. The cast iron rotor design is machined to tight tolerances and finished for even pad contact, quieter operation, and stable braking on the Audi A6 rear axle. The 5000 Advanced pads are formulated for modern vehicle braking demands and are assembled with shims that help manage vibration and noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The part number 4512-74086 is a practical choice for a rear brake refresh on the Audi A6 when you want rotors, pads, and hardware matched in one package.
Common Brake Issues Addressed
- Rear brake noise during stops
- Uneven pad wear or rotor surface irregularities
- Corrosion on worn brake components
- Longer pedal response from aged friction parts
- Vibration or harshness from fatigued hardware
Installation Notes
Before installation, confirm rear fitment for your 2002-2004 Audi A6 and inspect calipers, slides, and mounting points for wear. The coated rotors are shipped dry and do not require additional preparation before installation. Follow proper brake service procedures and bed in the pads according to the vehicle and friction material guidelines.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4512-74086 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Audi A6.
Rear Brake Kit for Audi A6
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2002-2004 Audi A6. Part number 4512-74086 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner brake replacement.
Compatible With 2002-2004 Audi A6 rear brake applications, this kit is designed for drivers looking for OE-style fitment and consistent braking performance. The DFC 5000 Advanced pad formulation and GeoSpec coated rotor finish are aimed at stable stopping, reduced noise, and easier installation prep.
Key Features
- Part number 4512-74086 for rear brake service
- Fits 2002-2004 Audi A6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bedding
Product Details
DFC GeoSpec rotors are processed dry and ready to install, which helps eliminate the extra cleaning step often needed with oil-coated rotors. The cast iron rotor design is machined to tight tolerances and finished for even pad contact, quieter operation, and stable braking on the Audi A6 rear axle. The 5000 Advanced pads are formulated for modern vehicle braking demands and are assembled with shims that help manage vibration and noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The part number 4512-74086 is a practical choice for a rear brake refresh on the Audi A6 when you want rotors, pads, and hardware matched in one package.
Common Brake Issues Addressed
- Rear brake noise during stops
- Uneven pad wear or rotor surface irregularities
- Corrosion on worn brake components
- Longer pedal response from aged friction parts
- Vibration or harshness from fatigued hardware
Installation Notes
Before installation, confirm rear fitment for your 2002-2004 Audi A6 and inspect calipers, slides, and mounting points for wear. The coated rotors are shipped dry and do not require additional preparation before installation. Follow proper brake service procedures and bed in the pads according to the vehicle and friction material guidelines.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4512-74086 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Audi A6.
Description
Rear Brake Kit for Audi A6
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on the 2002-2004 Audi A6. Part number 4512-74086 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner brake replacement.
Compatible With 2002-2004 Audi A6 rear brake applications, this kit is designed for drivers looking for OE-style fitment and consistent braking performance. The DFC 5000 Advanced pad formulation and GeoSpec coated rotor finish are aimed at stable stopping, reduced noise, and easier installation prep.
Key Features
- Part number 4512-74086 for rear brake service
- Fits 2002-2004 Audi A6, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bedding
Product Details
DFC GeoSpec rotors are processed dry and ready to install, which helps eliminate the extra cleaning step often needed with oil-coated rotors. The cast iron rotor design is machined to tight tolerances and finished for even pad contact, quieter operation, and stable braking on the Audi A6 rear axle. The 5000 Advanced pads are formulated for modern vehicle braking demands and are assembled with shims that help manage vibration and noise.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The part number 4512-74086 is a practical choice for a rear brake refresh on the Audi A6 when you want rotors, pads, and hardware matched in one package.
Common Brake Issues Addressed
- Rear brake noise during stops
- Uneven pad wear or rotor surface irregularities
- Corrosion on worn brake components
- Longer pedal response from aged friction parts
- Vibration or harshness from fatigued hardware
Installation Notes
Before installation, confirm rear fitment for your 2002-2004 Audi A6 and inspect calipers, slides, and mounting points for wear. The coated rotors are shipped dry and do not require additional preparation before installation. Follow proper brake service procedures and bed in the pads according to the vehicle and friction material guidelines.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and undergo 100% inspection of critical dimensions and balance checks on vented rotors. Each rotor includes a 12-month warranty against defects in material and workmanship. Part number 4512-74086 is backed by DFC’s controlled machining and inspection process for consistent rear brake service on the Audi A6.
