Dynamite Friction 4512-74083 Disc Brake Kit - Rear
Rear Brake Kit for Audi A6 and 100
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74083, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware in one service package for a cleaner brake replacement on the rear axle.
Compatible With 1992-1994 Audi 100, rear and 1992-1994 Audi 100 Quattro, rear, plus 1995-1998 Audi A6, rear and 1995-1998 Audi A6 Quattro, rear. This part number 4512-74083 is a direct-fit service kit for rear brake maintenance on these vehicles.
Key Features
- Complete rear disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as an all-in-one brake service solution for rear axle repairs. The coated rotors are machined to OE-style tolerances from G3000/G11H18 cast iron, then finished with a non-directional surface to support consistent pad contact and quieter stops. The ceramic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel.
For Audi A6 rear brake replacement and Audi 100 rear brake service, part number 4512-74083 provides the core components needed for a complete rear brake job on the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads, rotors, and hardware separately
Installation Notes
Rear brake service on these Audi applications should be performed with the caliper, rotor, pad, and hardware surfaces cleaned and inspected before assembly. The GeoSpec coating is designed to be swept away by the friction material during normal use, so no extra rotor preparation is required. Verify rear axle fitment by model and year before installation, and follow the vehicle manufacturer’s brake service procedures for torque and bedding.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, and vented rotors are electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
Rear Brake Kit for Audi A6 and 100
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74083, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware in one service package for a cleaner brake replacement on the rear axle.
Compatible With 1992-1994 Audi 100, rear and 1992-1994 Audi 100 Quattro, rear, plus 1995-1998 Audi A6, rear and 1995-1998 Audi A6 Quattro, rear. This part number 4512-74083 is a direct-fit service kit for rear brake maintenance on these vehicles.
Key Features
- Complete rear disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as an all-in-one brake service solution for rear axle repairs. The coated rotors are machined to OE-style tolerances from G3000/G11H18 cast iron, then finished with a non-directional surface to support consistent pad contact and quieter stops. The ceramic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel.
For Audi A6 rear brake replacement and Audi 100 rear brake service, part number 4512-74083 provides the core components needed for a complete rear brake job on the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads, rotors, and hardware separately
Installation Notes
Rear brake service on these Audi applications should be performed with the caliper, rotor, pad, and hardware surfaces cleaned and inspected before assembly. The GeoSpec coating is designed to be swept away by the friction material during normal use, so no extra rotor preparation is required. Verify rear axle fitment by model and year before installation, and follow the vehicle manufacturer’s brake service procedures for torque and bedding.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, and vented rotors are electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
Description
Rear Brake Kit for Audi A6 and 100
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-74083, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware in one service package for a cleaner brake replacement on the rear axle.
Compatible With 1992-1994 Audi 100, rear and 1992-1994 Audi 100 Quattro, rear, plus 1995-1998 Audi A6, rear and 1995-1998 Audi A6 Quattro, rear. This part number 4512-74083 is a direct-fit service kit for rear brake maintenance on these vehicles.
Key Features
- Complete rear disc brake kit with rotors, pads, and hardware
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is designed as an all-in-one brake service solution for rear axle repairs. The coated rotors are machined to OE-style tolerances from G3000/G11H18 cast iron, then finished with a non-directional surface to support consistent pad contact and quieter stops. The ceramic pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware is engineered to restore proper caliper movement and spring tension where worn or corroded components can affect braking feel.
For Audi A6 rear brake replacement and Audi 100 rear brake service, part number 4512-74083 provides the core components needed for a complete rear brake job on the listed applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotor surfaces
- Rust buildup on exposed rotor surfaces
- Longer service time when replacing pads, rotors, and hardware separately
Installation Notes
Rear brake service on these Audi applications should be performed with the caliper, rotor, pad, and hardware surfaces cleaned and inspected before assembly. The GeoSpec coating is designed to be swept away by the friction material during normal use, so no extra rotor preparation is required. Verify rear axle fitment by model and year before installation, and follow the vehicle manufacturer’s brake service procedures for torque and bedding.
Quality Assurance
Each DFC GeoSpec rotor is inspected for critical dimensions and balance, and vented rotors are electronically mill-balanced when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
