Dynamite Friction 4512-73151 Disc Brake Kit - Front
Front Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front axle service on select Audi applications. Part number 4512-73151 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
- Front disc brake kit with coated rotors, ceramic pads, and hardware
- GEOSPEC rotor coating helps resist rust and arrives dry for installation
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-style rotor casting and machining for durability and consistent fit
Product Line Details
DFC GEOSPEC Coated Rotors are designed with a silver-gray protective coating that helps fight corrosion better than conventional paint or zinc finishes. The rotors are processed dry and ready to install, which can reduce prep time during brake service. DFC 5000 Advanced Brake Pads are formulated for stable friction output, with post-curing and scorching used to reduce initial break-in requirements. The included hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Compatible With Select Audi Models
- Fits 2012-2016 Audi A4, front
- Fits 2013-2016 Audi A4 allroad, front
- Fits 2012-2016 Audi A4 Quattro, front
- Fits 2013-2016 Audi allroad, front
This part number, 4512-73151, is a direct-fit front brake service kit for Audi A4 and Audi A4 Quattro applications listed above. It is also a practical search match for drivers looking for front brake pads and rotors for 2012-2016 Audi A4 Quattro or 2013-2016 Audi allroad service.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor surfaces
- Extended stopping distance caused by worn friction material
- Vibration or harshness during normal braking
Installation Notes and Tips
Inspect calipers, slide pins, and brake hoses before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow the vehicle manufacturer’s torque specifications for wheel and caliper fasteners. After installation, perform a proper pad bed-in procedure to help establish even transfer on the rotor surface.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction characteristics, and the hardware kit uses OE-style materials for form, fit, and function.
Front Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front axle service on select Audi applications. Part number 4512-73151 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
- Front disc brake kit with coated rotors, ceramic pads, and hardware
- GEOSPEC rotor coating helps resist rust and arrives dry for installation
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-style rotor casting and machining for durability and consistent fit
Product Line Details
DFC GEOSPEC Coated Rotors are designed with a silver-gray protective coating that helps fight corrosion better than conventional paint or zinc finishes. The rotors are processed dry and ready to install, which can reduce prep time during brake service. DFC 5000 Advanced Brake Pads are formulated for stable friction output, with post-curing and scorching used to reduce initial break-in requirements. The included hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Compatible With Select Audi Models
- Fits 2012-2016 Audi A4, front
- Fits 2013-2016 Audi A4 allroad, front
- Fits 2012-2016 Audi A4 Quattro, front
- Fits 2013-2016 Audi allroad, front
This part number, 4512-73151, is a direct-fit front brake service kit for Audi A4 and Audi A4 Quattro applications listed above. It is also a practical search match for drivers looking for front brake pads and rotors for 2012-2016 Audi A4 Quattro or 2013-2016 Audi allroad service.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor surfaces
- Extended stopping distance caused by worn friction material
- Vibration or harshness during normal braking
Installation Notes and Tips
Inspect calipers, slide pins, and brake hoses before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow the vehicle manufacturer’s torque specifications for wheel and caliper fasteners. After installation, perform a proper pad bed-in procedure to help establish even transfer on the rotor surface.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction characteristics, and the hardware kit uses OE-style materials for form, fit, and function.
Description
Front Brake Kit for Audi A4 and A4 Quattro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front axle service on select Audi applications. Part number 4512-73151 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
- Front disc brake kit with coated rotors, ceramic pads, and hardware
- GEOSPEC rotor coating helps resist rust and arrives dry for installation
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-style rotor casting and machining for durability and consistent fit
Product Line Details
DFC GEOSPEC Coated Rotors are designed with a silver-gray protective coating that helps fight corrosion better than conventional paint or zinc finishes. The rotors are processed dry and ready to install, which can reduce prep time during brake service. DFC 5000 Advanced Brake Pads are formulated for stable friction output, with post-curing and scorching used to reduce initial break-in requirements. The included hardware is engineered with PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Compatible With Select Audi Models
- Fits 2012-2016 Audi A4, front
- Fits 2013-2016 Audi A4 allroad, front
- Fits 2012-2016 Audi A4 Quattro, front
- Fits 2013-2016 Audi allroad, front
This part number, 4512-73151, is a direct-fit front brake service kit for Audi A4 and Audi A4 Quattro applications listed above. It is also a practical search match for drivers looking for front brake pads and rotors for 2012-2016 Audi A4 Quattro or 2013-2016 Audi allroad service.
Common Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor surfaces
- Extended stopping distance caused by worn friction material
- Vibration or harshness during normal braking
Installation Notes and Tips
Inspect calipers, slide pins, and brake hoses before installation. Clean the hub mounting surface thoroughly so the new rotors seat flat, and follow the vehicle manufacturer’s torque specifications for wheel and caliper fasteners. After installation, perform a proper pad bed-in procedure to help establish even transfer on the rotor surface.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and 100% inspected for critical dimensions and balance on vented rotors. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction characteristics, and the hardware kit uses OE-style materials for form, fit, and function.
