Dynamite Friction 4512-73148 Disc Brake Kit - Rear
Rear Brake Kit for Audi A8 Quattro
Built for rear brake service on the 2015-2018 Audi A8 Quattro, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one application-specific package. Part number 4512-73148 is designed for drivers who want OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Fits 2015-2018 Audi A8 Quattro, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73148
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for rear brake replacement on the Audi A8 Quattro. The rotors are made to G3000/G11H18 cast iron specifications, processed dry, and ready to install without extra cleaning. The pads are formulated for stable friction performance, while the included hardware is designed to restore proper spring tension and caliper movement during service. This rear brake kit for 2015-2018 Audi A8 Quattro applications is a practical choice when replacing worn brake components as a complete set. Part number 4512-73148 identifies this exact rear kit configuration.
Common Brake Service Issues
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping consistency from worn rear rotors and pads
- Longer brake service time due to coated rotor preparation
- Vibration or harshness during rear brake operation
Installation Notes
Compatible With 2015-2018 Audi A8 Quattro rear brake service. The coated rotors are shipped dry and can be installed without removing oil residue. Clean the rotor surface only as needed during installation, and follow the vehicle manufacturer’s brake service procedures for pad bedding and torque specifications. Verify rear axle fitment before ordering. Part number 4512-73148 should be matched to the rear position only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware is built to OE-style form, fit, and function standards.
Rear Brake Kit for Audi A8 Quattro
Built for rear brake service on the 2015-2018 Audi A8 Quattro, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one application-specific package. Part number 4512-73148 is designed for drivers who want OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Fits 2015-2018 Audi A8 Quattro, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73148
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for rear brake replacement on the Audi A8 Quattro. The rotors are made to G3000/G11H18 cast iron specifications, processed dry, and ready to install without extra cleaning. The pads are formulated for stable friction performance, while the included hardware is designed to restore proper spring tension and caliper movement during service. This rear brake kit for 2015-2018 Audi A8 Quattro applications is a practical choice when replacing worn brake components as a complete set. Part number 4512-73148 identifies this exact rear kit configuration.
Common Brake Service Issues
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping consistency from worn rear rotors and pads
- Longer brake service time due to coated rotor preparation
- Vibration or harshness during rear brake operation
Installation Notes
Compatible With 2015-2018 Audi A8 Quattro rear brake service. The coated rotors are shipped dry and can be installed without removing oil residue. Clean the rotor surface only as needed during installation, and follow the vehicle manufacturer’s brake service procedures for pad bedding and torque specifications. Verify rear axle fitment before ordering. Part number 4512-73148 should be matched to the rear position only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware is built to OE-style form, fit, and function standards.
Description
Rear Brake Kit for Audi A8 Quattro
Built for rear brake service on the 2015-2018 Audi A8 Quattro, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one application-specific package. Part number 4512-73148 is designed for drivers who want OE-style fitment, corrosion protection, and consistent braking performance.
Key Features
- Fits 2015-2018 Audi A8 Quattro, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Rotors machined to tight tolerances with a non-directional finish for smoother pad bedding
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73148
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for rear brake replacement on the Audi A8 Quattro. The rotors are made to G3000/G11H18 cast iron specifications, processed dry, and ready to install without extra cleaning. The pads are formulated for stable friction performance, while the included hardware is designed to restore proper spring tension and caliper movement during service. This rear brake kit for 2015-2018 Audi A8 Quattro applications is a practical choice when replacing worn brake components as a complete set. Part number 4512-73148 identifies this exact rear kit configuration.
Common Brake Service Issues
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced stopping consistency from worn rear rotors and pads
- Longer brake service time due to coated rotor preparation
- Vibration or harshness during rear brake operation
Installation Notes
Compatible With 2015-2018 Audi A8 Quattro rear brake service. The coated rotors are shipped dry and can be installed without removing oil residue. Clean the rotor surface only as needed during installation, and follow the vehicle manufacturer’s brake service procedures for pad bedding and torque specifications. Verify rear axle fitment before ordering. Part number 4512-73148 should be matched to the rear position only.
Quality Assurance
DFC rotors are 100% inspected for critical dimensions and balance, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware is built to OE-style form, fit, and function standards.
