Dynamite Friction 4512-73122 Disc Brake Kit - Rear
Rear Brake Kit for Audi A4 and A4 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73122, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware components in one service package for rear brake replacement.
Key Features
- Rear disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4512-73122 brake kit is designed for rear service on 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro, plus 2005 Audi A4 Quattro applications noted with 288mm front rotors. DFC GEOSPEC rotors are machined to tight tolerances, inspected for balance on vented designs, and finished to OE specifications for consistent fit and braking feel. The 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This part number 4512-73122 is a direct service solution for rear brake maintenance on Audi A4 and Audi A4 Quattro models.
Compatible With: Fits 2002-2006 Audi A4, rear. Fits 2002-2004 Audi A4 Quattro, rear. Fits 2005 Audi A4 Quattro, rear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Can Help Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Rear brake service on these Audi applications should be performed with the correct rotor size and fitment verified before installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Inspect calipers, slides, and mounting points during service so the new pads and hardware can operate as intended.
Quality Assurance
DFC states that each rotor is inspected to confirm critical dimensions and OE-spec requirements, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Rear Brake Kit for Audi A4 and A4 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73122, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware components in one service package for rear brake replacement.
Key Features
- Rear disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4512-73122 brake kit is designed for rear service on 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro, plus 2005 Audi A4 Quattro applications noted with 288mm front rotors. DFC GEOSPEC rotors are machined to tight tolerances, inspected for balance on vented designs, and finished to OE specifications for consistent fit and braking feel. The 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This part number 4512-73122 is a direct service solution for rear brake maintenance on Audi A4 and Audi A4 Quattro models.
Compatible With: Fits 2002-2006 Audi A4, rear. Fits 2002-2004 Audi A4 Quattro, rear. Fits 2005 Audi A4 Quattro, rear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Can Help Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Rear brake service on these Audi applications should be performed with the correct rotor size and fitment verified before installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Inspect calipers, slides, and mounting points during service so the new pads and hardware can operate as intended.
Quality Assurance
DFC states that each rotor is inspected to confirm critical dimensions and OE-spec requirements, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $109.94
-65%$109.94
$38.48Description
Rear Brake Kit for Audi A4 and A4 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73122, is a rear disc brake kit built for select Audi applications. It combines coated rotors, ceramic brake pads, and matching hardware components in one service package for rear brake replacement.
Key Features
- Rear disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish for more even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The 4512-73122 brake kit is designed for rear service on 2002-2006 Audi A4 and 2002-2004 Audi A4 Quattro, plus 2005 Audi A4 Quattro applications noted with 288mm front rotors. DFC GEOSPEC rotors are machined to tight tolerances, inspected for balance on vented designs, and finished to OE specifications for consistent fit and braking feel. The 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This part number 4512-73122 is a direct service solution for rear brake maintenance on Audi A4 and Audi A4 Quattro models.
Compatible With: Fits 2002-2006 Audi A4, rear. Fits 2002-2004 Audi A4 Quattro, rear. Fits 2005 Audi A4 Quattro, rear.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Can Help Address
- Brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or stressed hardware
- Reduced braking consistency from worn rotors
- Rust buildup on exposed rotor surfaces
- Longer service time caused by cleaning oil-coated replacement rotors
Installation Notes
Rear brake service on these Audi applications should be performed with the correct rotor size and fitment verified before installation. The coated rotors are shipped dry and ready to install, which helps reduce prep time during the brake job. Inspect calipers, slides, and mounting points during service so the new pads and hardware can operate as intended.
Quality Assurance
DFC states that each rotor is inspected to confirm critical dimensions and OE-spec requirements, and the rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction characteristics, and the hardware kit is engineered to OE-style form, fit, and function.
