Dynamite Friction 4512-73120 Disc Brake Kit - Rear
Rear Brake Kit for Audi A6 and A6 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit built for 2005-2011 Audi A6 and Audi A6 Quattro applications. Part number 4512-73120 combines coated rotors, ceramic brake pads, and matching hardware in one service kit for a cleaner brake replacement.
This kit is aimed at drivers servicing rear brakes on the Audi A6 and Audi A6 Quattro, with components engineered to OE-style dimensions and braking behavior. The DFC 5000 Advanced pad formulation is post-cured, scorched, and paired with rubber-steel-rubber shims for stable friction and reduced noise. The GeoSpec rotor finish adds corrosion resistance and arrives dry for installation.
- Rear disc brake kit for 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit included for a complete rear brake service
- Part number 4512-73120 for application lookup and ordering
Product Details
DFC designed this brake kit around the demands of modern vehicle braking systems, using friction materials and rotor specifications selected to match OE requirements. The rotors are made from G3000/G11H18 cast iron, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust while eliminating the need to clean oil from the rotor before installation. This makes 4512-73120 a practical choice for rear brake service on Audi A6 and Audi A6 Quattro models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Uneven pad wear or reduced spring tension from worn hardware
- Rust buildup on rear rotors
- Longer stopping distances from worn friction material
- Brake pulsation caused by rotor wear or finish issues
Installation Notes
Compatible With rear brake service on 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro. Inspect calipers, slides, and mounting points before installation, and replace any worn components that affect pad movement or rotor alignment. The rotors are shipped dry and ready to install, and the pad surface is prepared to reduce initial bedding time.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support consistent friction performance and improved NVH characteristics.
Rear Brake Kit for Audi A6 and A6 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit built for 2005-2011 Audi A6 and Audi A6 Quattro applications. Part number 4512-73120 combines coated rotors, ceramic brake pads, and matching hardware in one service kit for a cleaner brake replacement.
This kit is aimed at drivers servicing rear brakes on the Audi A6 and Audi A6 Quattro, with components engineered to OE-style dimensions and braking behavior. The DFC 5000 Advanced pad formulation is post-cured, scorched, and paired with rubber-steel-rubber shims for stable friction and reduced noise. The GeoSpec rotor finish adds corrosion resistance and arrives dry for installation.
- Rear disc brake kit for 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit included for a complete rear brake service
- Part number 4512-73120 for application lookup and ordering
Product Details
DFC designed this brake kit around the demands of modern vehicle braking systems, using friction materials and rotor specifications selected to match OE requirements. The rotors are made from G3000/G11H18 cast iron, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust while eliminating the need to clean oil from the rotor before installation. This makes 4512-73120 a practical choice for rear brake service on Audi A6 and Audi A6 Quattro models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Uneven pad wear or reduced spring tension from worn hardware
- Rust buildup on rear rotors
- Longer stopping distances from worn friction material
- Brake pulsation caused by rotor wear or finish issues
Installation Notes
Compatible With rear brake service on 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro. Inspect calipers, slides, and mounting points before installation, and replace any worn components that affect pad movement or rotor alignment. The rotors are shipped dry and ready to install, and the pad surface is prepared to reduce initial bedding time.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support consistent friction performance and improved NVH characteristics.
Original: $188.86
-65%$188.86
$66.10Description
Rear Brake Kit for Audi A6 and A6 Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit built for 2005-2011 Audi A6 and Audi A6 Quattro applications. Part number 4512-73120 combines coated rotors, ceramic brake pads, and matching hardware in one service kit for a cleaner brake replacement.
This kit is aimed at drivers servicing rear brakes on the Audi A6 and Audi A6 Quattro, with components engineered to OE-style dimensions and braking behavior. The DFC 5000 Advanced pad formulation is post-cured, scorched, and paired with rubber-steel-rubber shims for stable friction and reduced noise. The GeoSpec rotor finish adds corrosion resistance and arrives dry for installation.
- Rear disc brake kit for 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Hardware kit included for a complete rear brake service
- Part number 4512-73120 for application lookup and ordering
Product Details
DFC designed this brake kit around the demands of modern vehicle braking systems, using friction materials and rotor specifications selected to match OE requirements. The rotors are made from G3000/G11H18 cast iron, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust while eliminating the need to clean oil from the rotor before installation. This makes 4512-73120 a practical choice for rear brake service on Audi A6 and Audi A6 Quattro models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Uneven pad wear or reduced spring tension from worn hardware
- Rust buildup on rear rotors
- Longer stopping distances from worn friction material
- Brake pulsation caused by rotor wear or finish issues
Installation Notes
Compatible With rear brake service on 2005-2011 Audi A6 and 2005-2008 Audi A6 Quattro. Inspect calipers, slides, and mounting points before installation, and replace any worn components that affect pad movement or rotor alignment. The rotors are shipped dry and ready to install, and the pad surface is prepared to reduce initial bedding time.
Quality Assurance
Each DFC GeoSpec rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims to support consistent friction performance and improved NVH characteristics.
