Dynamite Friction 4512-73111 Disc Brake Kit - Rear
Rear Brake Kit for Audi A4 and A4 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Audi applications. Part number 4512-73111 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on the listed Audi A4 and Audi A4 Quattro models.
- Rear disc brake kit with rotors, ceramic pads, and hardware components
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Line Details
DFC GEOSPEC Coated Rotors are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. The coating is designed to resist rust better than conventional paint or zinc finishes, while the finished rotor is inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction output and reduced break-in time, making this rear brake kit a practical service solution for Audi A4 and Audi A4 Quattro rear brake maintenance.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Uneven braking feel caused by worn or out-of-spec rear components
- Longer stopping distances from depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes and Fitment
Compatible With 2007-2009 Audi A4, rear; 2006-2009 Audi A4 Quattro, rear; 2005-2006 Audi A4, rear; and 2005 Audi A4 Quattro, rear. One listed application notes 321mm front rotors, so verify the rear brake configuration before ordering. Part number 4512-73111 is a rear brake service kit for the specified Audi A4 and Audi A4 Quattro vehicles.
Installation is typically completed during a standard rear brake service. The dry rotor finish reduces prep time, and the non-directional surface supports pad bedding after installation. Always confirm rotor size, caliper hardware condition, and vehicle-specific brake specifications before beginning the job.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-73111 is built to OE-style standards for rear brake service on the listed Audi applications.
Rear Brake Kit for Audi A4 and A4 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Audi applications. Part number 4512-73111 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on the listed Audi A4 and Audi A4 Quattro models.
- Rear disc brake kit with rotors, ceramic pads, and hardware components
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Line Details
DFC GEOSPEC Coated Rotors are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. The coating is designed to resist rust better than conventional paint or zinc finishes, while the finished rotor is inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction output and reduced break-in time, making this rear brake kit a practical service solution for Audi A4 and Audi A4 Quattro rear brake maintenance.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Uneven braking feel caused by worn or out-of-spec rear components
- Longer stopping distances from depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes and Fitment
Compatible With 2007-2009 Audi A4, rear; 2006-2009 Audi A4 Quattro, rear; 2005-2006 Audi A4, rear; and 2005 Audi A4 Quattro, rear. One listed application notes 321mm front rotors, so verify the rear brake configuration before ordering. Part number 4512-73111 is a rear brake service kit for the specified Audi A4 and Audi A4 Quattro vehicles.
Installation is typically completed during a standard rear brake service. The dry rotor finish reduces prep time, and the non-directional surface supports pad bedding after installation. Always confirm rotor size, caliper hardware condition, and vehicle-specific brake specifications before beginning the job.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-73111 is built to OE-style standards for rear brake service on the listed Audi applications.
Description
Rear Brake Kit for Audi A4 and A4 Quattro
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for select Audi applications. Part number 4512-73111 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh on the listed Audi A4 and Audi A4 Quattro models.
- Rear disc brake kit with rotors, ceramic pads, and hardware components
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel materials
Product Line Details
DFC GEOSPEC Coated Rotors are engineered to OE specifications using G3000/G11H18 cast iron and tight machining tolerances. The coating is designed to resist rust better than conventional paint or zinc finishes, while the finished rotor is inspected for balance and critical dimensions. The 5000 Advanced Brake Pads are formulated for consistent friction output and reduced break-in time, making this rear brake kit a practical service solution for Audi A4 and Audi A4 Quattro rear brake maintenance.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on daily-driven vehicles
- Uneven braking feel caused by worn or out-of-spec rear components
- Longer stopping distances from depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes and Fitment
Compatible With 2007-2009 Audi A4, rear; 2006-2009 Audi A4 Quattro, rear; 2005-2006 Audi A4, rear; and 2005 Audi A4 Quattro, rear. One listed application notes 321mm front rotors, so verify the rear brake configuration before ordering. Part number 4512-73111 is a rear brake service kit for the specified Audi A4 and Audi A4 Quattro vehicles.
Installation is typically completed during a standard rear brake service. The dry rotor finish reduces prep time, and the non-directional surface supports pad bedding after installation. Always confirm rotor size, caliper hardware condition, and vehicle-specific brake specifications before beginning the job.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining, and vented rotors are balance-checked and corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-73111 is built to OE-style standards for rear brake service on the listed Audi applications.
