Dynamite Friction 4512-73092 Disc Brake Kit - Rear
Rear Brake Kit for Audi Allroad Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73092, is a rear disc brake kit built for select Audi Allroad Quattro applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit for select Audi Allroad Quattro models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73092
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and harshness. This rear brake kit is a practical choice for Audi Allroad Quattro owners looking for a complete brake refresh with matched components.
Compatible With: Fits 2004-2005 Audi Allroad Quattro, rear, with Lucas Dual Piston Front Calipers; Fits 2004-2005 Audi Allroad Quattro, rear, with ATE Single Piston Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 2-Pad Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 4-Pad Front Calipers. Part number 4512-73092 is listed for these rear applications.
Common Brake Service Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor faces
- Reduced stopping performance from aged friction material
- Caliper movement or spring tension loss caused by corroded hardware
Installation Notes and Tips
Before installation, confirm the front caliper configuration shown in the fitment notes, since this rear kit is application-specific. Inspect calipers, slides, and mounting points for wear before reassembly. The rotors are processed dry and do not require cleaning of oil residue before installation. Follow standard brake service procedures and bed-in recommendations after installation for consistent pad and rotor contact.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
Rear Brake Kit for Audi Allroad Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73092, is a rear disc brake kit built for select Audi Allroad Quattro applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit for select Audi Allroad Quattro models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73092
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and harshness. This rear brake kit is a practical choice for Audi Allroad Quattro owners looking for a complete brake refresh with matched components.
Compatible With: Fits 2004-2005 Audi Allroad Quattro, rear, with Lucas Dual Piston Front Calipers; Fits 2004-2005 Audi Allroad Quattro, rear, with ATE Single Piston Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 2-Pad Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 4-Pad Front Calipers. Part number 4512-73092 is listed for these rear applications.
Common Brake Service Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor faces
- Reduced stopping performance from aged friction material
- Caliper movement or spring tension loss caused by corroded hardware
Installation Notes and Tips
Before installation, confirm the front caliper configuration shown in the fitment notes, since this rear kit is application-specific. Inspect calipers, slides, and mounting points for wear before reassembly. The rotors are processed dry and do not require cleaning of oil residue before installation. Follow standard brake service procedures and bed-in recommendations after installation for consistent pad and rotor contact.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
Original: $121.06
-65%$121.06
$42.37Description
Rear Brake Kit for Audi Allroad Quattro
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-73092, is a rear disc brake kit built for select Audi Allroad Quattro applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit for select Audi Allroad Quattro models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-73092
Product Details
The DFC GEOSPEC rotor design is machined to tight tolerances and built to OE-style G3000/G11H18 cast iron specifications for durability and stable braking performance. The coated surface is shipped dry and ready to install, helping reduce prep time during brake service. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and harshness. This rear brake kit is a practical choice for Audi Allroad Quattro owners looking for a complete brake refresh with matched components.
Compatible With: Fits 2004-2005 Audi Allroad Quattro, rear, with Lucas Dual Piston Front Calipers; Fits 2004-2005 Audi Allroad Quattro, rear, with ATE Single Piston Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 2-Pad Front Calipers; Fits 2001-2003 Audi Allroad Quattro, rear, 4-Pad Front Calipers. Part number 4512-73092 is listed for these rear applications.
Common Brake Service Issues This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor faces
- Reduced stopping performance from aged friction material
- Caliper movement or spring tension loss caused by corroded hardware
Installation Notes and Tips
Before installation, confirm the front caliper configuration shown in the fitment notes, since this rear kit is application-specific. Inspect calipers, slides, and mounting points for wear before reassembly. The rotors are processed dry and do not require cleaning of oil residue before installation. Follow standard brake service procedures and bed-in recommendations after installation for consistent pad and rotor contact.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, while the hardware kit is engineered to OE-style form, fit, and function.
