
Dynamite Friction 4512-67129 Disc Brake Kit - Rear
Rear Brake Kit for Nissan Rogue
This DFC brake kit is built for rear service on the 2008-2013 Nissan Rogue. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware components in one service package for a complete rear brake refresh.
Part number 4512-67129 is designed for drivers looking for an OE-style rear brake kit for Nissan Rogue models with corrosion-resistant rotor protection and low-noise pad construction.
Key Features
- Fits 2008-2013 Nissan Rogue, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- Machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Part number 4512-67129
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered for rear brake service on the Nissan Rogue. The rotors are cast to OE-style G3000/G11H18 specifications, then machined and inspected for balance and critical dimensions. The coated surface helps resist rust and is designed to wear away cleanly during braking without affecting performance. The ceramic pads are formulated for stable friction, and the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4512-67129 is a practical choice for a rear brake job on 2008-2013 Nissan Rogue models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer installation time from rotors that require cleaning before use
Installation Notes
Verify rear axle fitment before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake service. Follow standard brake service procedures, inspect caliper condition, and confirm proper pad bedding after installation. For a complete rear brake refresh on a Nissan Rogue, confirm that part number 4512-67129 matches your vehicle year and position.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for more consistent friction performance, while the hardware is built to OE-style form, fit, and function.
Rear Brake Kit for Nissan Rogue
This DFC brake kit is built for rear service on the 2008-2013 Nissan Rogue. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware components in one service package for a complete rear brake refresh.
Part number 4512-67129 is designed for drivers looking for an OE-style rear brake kit for Nissan Rogue models with corrosion-resistant rotor protection and low-noise pad construction.
Key Features
- Fits 2008-2013 Nissan Rogue, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- Machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Part number 4512-67129
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered for rear brake service on the Nissan Rogue. The rotors are cast to OE-style G3000/G11H18 specifications, then machined and inspected for balance and critical dimensions. The coated surface helps resist rust and is designed to wear away cleanly during braking without affecting performance. The ceramic pads are formulated for stable friction, and the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4512-67129 is a practical choice for a rear brake job on 2008-2013 Nissan Rogue models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer installation time from rotors that require cleaning before use
Installation Notes
Verify rear axle fitment before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake service. Follow standard brake service procedures, inspect caliper condition, and confirm proper pad bedding after installation. For a complete rear brake refresh on a Nissan Rogue, confirm that part number 4512-67129 matches your vehicle year and position.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for more consistent friction performance, while the hardware is built to OE-style form, fit, and function.
Original: $142.14
-65%$142.14
$49.75Description
Rear Brake Kit for Nissan Rogue
This DFC brake kit is built for rear service on the 2008-2013 Nissan Rogue. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware components in one service package for a complete rear brake refresh.
Part number 4512-67129 is designed for drivers looking for an OE-style rear brake kit for Nissan Rogue models with corrosion-resistant rotor protection and low-noise pad construction.
Key Features
- Fits 2008-2013 Nissan Rogue, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Dry-processed rotors that are ready to install without oil removal
- Machined to tight tolerances with a non-directional finish for smoother pad bed-in
- Part number 4512-67129
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is engineered for rear brake service on the Nissan Rogue. The rotors are cast to OE-style G3000/G11H18 specifications, then machined and inspected for balance and critical dimensions. The coated surface helps resist rust and is designed to wear away cleanly during braking without affecting performance. The ceramic pads are formulated for stable friction, and the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. Part number 4512-67129 is a practical choice for a rear brake job on 2008-2013 Nissan Rogue models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer installation time from rotors that require cleaning before use
Installation Notes
Verify rear axle fitment before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a rear brake service. Follow standard brake service procedures, inspect caliper condition, and confirm proper pad bedding after installation. For a complete rear brake refresh on a Nissan Rogue, confirm that part number 4512-67129 matches your vehicle year and position.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for more consistent friction performance, while the hardware is built to OE-style form, fit, and function.











