Dynamite Friction 4512-67116 Disc Brake Kit - Front
Front Brake Kit for Nissan Sentra
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67116, is a front disc brake kit for 2013-2019 Nissan Sentra applications. It combines coated rotors, ceramic brake pads, and matched hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2013-2019 Nissan Sentra, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4512-67116 for front brake service on the Nissan Sentra
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is built for drivers who want OE-style brake service parts in one package. For the Nissan Sentra front axle, this kit pairs dry, ready-to-install coated rotors with ceramic pads engineered for stable friction performance and quieter operation. The rotor casting uses G3000/G11H18 cast iron and is machined to tight tolerances, then inspected for balance and critical dimensions to support consistent braking performance. Part number 4512-67116 is a practical choice for front brake maintenance on 2013-2019 Nissan Sentra models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
- Longer stopping distances from worn front brake parts
Installation Notes
Compatible With 2013-2019 Nissan Sentra front brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly and follow proper torque procedures during assembly. The coated rotor surface is ready to install without additional preparation, and the pad material will bed in more evenly when the rotor face is kept free of grease and debris.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
Front Brake Kit for Nissan Sentra
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67116, is a front disc brake kit for 2013-2019 Nissan Sentra applications. It combines coated rotors, ceramic brake pads, and matched hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2013-2019 Nissan Sentra, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4512-67116 for front brake service on the Nissan Sentra
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is built for drivers who want OE-style brake service parts in one package. For the Nissan Sentra front axle, this kit pairs dry, ready-to-install coated rotors with ceramic pads engineered for stable friction performance and quieter operation. The rotor casting uses G3000/G11H18 cast iron and is machined to tight tolerances, then inspected for balance and critical dimensions to support consistent braking performance. Part number 4512-67116 is a practical choice for front brake maintenance on 2013-2019 Nissan Sentra models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
- Longer stopping distances from worn front brake parts
Installation Notes
Compatible With 2013-2019 Nissan Sentra front brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly and follow proper torque procedures during assembly. The coated rotor surface is ready to install without additional preparation, and the pad material will bed in more evenly when the rotor face is kept free of grease and debris.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
Description
Front Brake Kit for Nissan Sentra
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67116, is a front disc brake kit for 2013-2019 Nissan Sentra applications. It combines coated rotors, ceramic brake pads, and matched hardware components in one service package for a complete front brake refresh.
Key Features
- Fits 2013-2019 Nissan Sentra, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4512-67116 for front brake service on the Nissan Sentra
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line is built for drivers who want OE-style brake service parts in one package. For the Nissan Sentra front axle, this kit pairs dry, ready-to-install coated rotors with ceramic pads engineered for stable friction performance and quieter operation. The rotor casting uses G3000/G11H18 cast iron and is machined to tight tolerances, then inspected for balance and critical dimensions to support consistent braking performance. Part number 4512-67116 is a practical choice for front brake maintenance on 2013-2019 Nissan Sentra models.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Front brake pulsation from worn or uneven rotors
- Brake noise caused by aged pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
- Longer stopping distances from worn front brake parts
Installation Notes
Compatible With 2013-2019 Nissan Sentra front brake service. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface thoroughly and follow proper torque procedures during assembly. The coated rotor surface is ready to install without additional preparation, and the pad material will bed in more evenly when the rotor face is kept free of grease and debris.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function.
