Dynamite Friction 4512-67105 Disc Brake Kit - Front
Front Brake Kit for Nissan Altima
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Nissan Altima applications. Part number 4512-67105 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake repair.
Compatible With 2007-2013 Nissan Altima front brake service, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and quiet operation. The DFC 4512-67105 package is also a practical choice for shops and DIY repairs that want OE-style fitment and corrosion protection in one order.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for smoother pad bedding and quieter stops
- Dry-processed, dry-shipped rotors ready for installation
Product Details
DFC engineers this brake kit around OE-style requirements for durability, stability, and consistent braking performance. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact during bed-in. The 5000 Advanced pads are formulated for stable friction output and reduced noise, making this kit a strong fit for Nissan Altima front brake replacement work.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noise from aged pads and fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by worn disc brake hardware
- Longer stopping distances from depleted friction material
Installation Notes
Fits 2007-2011 Nissan Altima, front. Fits 2012-2013 Nissan Altima, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, verify rotor runout, and follow the recommended pad bed-in procedure after installation. Part number 4512-67105 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Nissan Altima
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Nissan Altima applications. Part number 4512-67105 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake repair.
Compatible With 2007-2013 Nissan Altima front brake service, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and quiet operation. The DFC 4512-67105 package is also a practical choice for shops and DIY repairs that want OE-style fitment and corrosion protection in one order.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for smoother pad bedding and quieter stops
- Dry-processed, dry-shipped rotors ready for installation
Product Details
DFC engineers this brake kit around OE-style requirements for durability, stability, and consistent braking performance. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact during bed-in. The 5000 Advanced pads are formulated for stable friction output and reduced noise, making this kit a strong fit for Nissan Altima front brake replacement work.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noise from aged pads and fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by worn disc brake hardware
- Longer stopping distances from depleted friction material
Installation Notes
Fits 2007-2011 Nissan Altima, front. Fits 2012-2013 Nissan Altima, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, verify rotor runout, and follow the recommended pad bed-in procedure after installation. Part number 4512-67105 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Front Brake Kit for Nissan Altima
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Nissan Altima applications. Part number 4512-67105 combines coated rotors, ceramic pads, and matching hardware components in one service kit for a cleaner, more complete brake repair.
Compatible With 2007-2013 Nissan Altima front brake service, this kit is designed for drivers replacing worn rotors and pads while restoring consistent pedal feel and quiet operation. The DFC 4512-67105 package is also a practical choice for shops and DIY repairs that want OE-style fitment and corrosion protection in one order.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for smoother pad bedding and quieter stops
- Dry-processed, dry-shipped rotors ready for installation
Product Details
DFC engineers this brake kit around OE-style requirements for durability, stability, and consistent braking performance. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The coated surface helps resist rust better than conventional paint or zinc finishes, while the non-directional finish supports even pad contact during bed-in. The 5000 Advanced pads are formulated for stable friction output and reduced noise, making this kit a strong fit for Nissan Altima front brake replacement work.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Kit Can Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noise from aged pads and fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by worn disc brake hardware
- Longer stopping distances from depleted friction material
Installation Notes
Fits 2007-2011 Nissan Altima, front. Fits 2012-2013 Nissan Altima, front. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, verify rotor runout, and follow the recommended pad bed-in procedure after installation. Part number 4512-67105 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes, and vented rotors are electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
