Dynamite Friction 4512-67093 Disc Brake Kit - Front
Front Brake Kit for Nissan Maxima and Murano
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Nissan applications. Part number 4512-67093 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for 2004-2005 Nissan Maxima and 2003-2004 Nissan Murano
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-67093 for front brake service
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to match OEM cast iron specifications for durability, reliability, and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry shipping process saves prep time during installation. The 5000 Advanced ceramic pads are formulated for consistent friction and improved initial stopping response, and the included hardware is engineered to restore proper caliper movement and reduce brake noise. This kit is a practical choice for drivers searching for a front brake kit for 2004-2005 Nissan Maxima or a front brake kit for 2003-2004 Nissan Murano, and part number 4512-67093 is the reference to use when ordering.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Vibration or harshness during normal braking
Installation Notes
Fits 2004-2005 Nissan Maxima, front. Fits 2004 Nissan Murano, front, vehicle production date to 4/04. Fits 2003 Nissan Murano, front. Before installation, confirm rotor size, caliper condition, and vehicle production date on Murano models. Clean mating surfaces, follow proper torque procedures, and complete a careful bed-in cycle for the new pads and rotors. Part number 4512-67093 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The finished rotors are checked to OE specifications, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Nissan Maxima and Murano
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Nissan applications. Part number 4512-67093 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for 2004-2005 Nissan Maxima and 2003-2004 Nissan Murano
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-67093 for front brake service
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to match OEM cast iron specifications for durability, reliability, and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry shipping process saves prep time during installation. The 5000 Advanced ceramic pads are formulated for consistent friction and improved initial stopping response, and the included hardware is engineered to restore proper caliper movement and reduce brake noise. This kit is a practical choice for drivers searching for a front brake kit for 2004-2005 Nissan Maxima or a front brake kit for 2003-2004 Nissan Murano, and part number 4512-67093 is the reference to use when ordering.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Vibration or harshness during normal braking
Installation Notes
Fits 2004-2005 Nissan Maxima, front. Fits 2004 Nissan Murano, front, vehicle production date to 4/04. Fits 2003 Nissan Murano, front. Before installation, confirm rotor size, caliper condition, and vehicle production date on Murano models. Clean mating surfaces, follow proper torque procedures, and complete a careful bed-in cycle for the new pads and rotors. Part number 4512-67093 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The finished rotors are checked to OE specifications, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
Description
Front Brake Kit for Nissan Maxima and Murano
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Nissan applications. Part number 4512-67093 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for 2004-2005 Nissan Maxima and 2003-2004 Nissan Murano
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-67093 for front brake service
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances and built to match OEM cast iron specifications for durability, reliability, and stability. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry shipping process saves prep time during installation. The 5000 Advanced ceramic pads are formulated for consistent friction and improved initial stopping response, and the included hardware is engineered to restore proper caliper movement and reduce brake noise. This kit is a practical choice for drivers searching for a front brake kit for 2004-2005 Nissan Maxima or a front brake kit for 2003-2004 Nissan Murano, and part number 4512-67093 is the reference to use when ordering.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn front brake parts
- Vibration or harshness during normal braking
Installation Notes
Fits 2004-2005 Nissan Maxima, front. Fits 2004 Nissan Murano, front, vehicle production date to 4/04. Fits 2003 Nissan Murano, front. Before installation, confirm rotor size, caliper condition, and vehicle production date on Murano models. Clean mating surfaces, follow proper torque procedures, and complete a careful bed-in cycle for the new pads and rotors. Part number 4512-67093 should be matched to the vehicle’s front axle application only.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during electronic mill-balancing. The finished rotors are checked to OE specifications, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship.
