Dynamite Friction 4512-67091 Disc Brake Kit - Front
Brake Kit for Nissan Altima, INFINITI I35, and Maxima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style braking performance and corrosion resistance. Part number 4512-67091 combines coated rotors, ceramic pads, and matched hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and vibration. Part number 4512-67091 is a practical choice for drivers looking for a front brake kit for 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, or 2002-2003 Nissan Maxima.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise such as squeal or chatter from worn pads and fatigued hardware
- Rust buildup on rotor surfaces and rotor hats
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excess caliper movement related to worn hardware components
Installation Notes
Compatible With front brake service on 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, and 2002-2003 Nissan Maxima. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, torque fasteners to vehicle specifications, and follow the recommended pad bed-in procedure after installation. The rotor coating is designed to be swept away by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
Brake Kit for Nissan Altima, INFINITI I35, and Maxima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style braking performance and corrosion resistance. Part number 4512-67091 combines coated rotors, ceramic pads, and matched hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and vibration. Part number 4512-67091 is a practical choice for drivers looking for a front brake kit for 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, or 2002-2003 Nissan Maxima.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise such as squeal or chatter from worn pads and fatigued hardware
- Rust buildup on rotor surfaces and rotor hats
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excess caliper movement related to worn hardware components
Installation Notes
Compatible With front brake service on 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, and 2002-2003 Nissan Maxima. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, torque fasteners to vehicle specifications, and follow the recommended pad bed-in procedure after installation. The rotor coating is designed to be swept away by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Brake Kit for Nissan Altima, INFINITI I35, and Maxima
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style braking performance and corrosion resistance. Part number 4512-67091 combines coated rotors, ceramic pads, and matched hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware components
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC rotors are manufactured to G3000/G11H18 cast iron specifications and machined to tight tolerances for OE-style durability and stability. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pads are formulated for consistent friction and are assembled with shims that help reduce brake noise and vibration. Part number 4512-67091 is a practical choice for drivers looking for a front brake kit for 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, or 2002-2003 Nissan Maxima.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake noise such as squeal or chatter from worn pads and fatigued hardware
- Rust buildup on rotor surfaces and rotor hats
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Excess caliper movement related to worn hardware components
Installation Notes
Compatible With front brake service on 2002-2006 Nissan Altima, 2002-2004 INFINITI I35, and 2002-2003 Nissan Maxima. Inspect calipers, slides, and brake fluid condition before installation. Clean the hub mounting surface, torque fasteners to vehicle specifications, and follow the recommended pad bed-in procedure after installation. The rotor coating is designed to be swept away by the brake pads during normal use.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. The rotors include a 12-month warranty against defects in material and workmanship.
