Dynamite Friction 4512-67087 Disc Brake Kit - Rear
Rear Brake Kit for Nissan 240SX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67087, is a rear disc brake kit for select Nissan 240SX applications. It combines coated rotors, ceramic brake pads, and matching hardware for a service-ready brake repair on 1994-1998 Nissan 240SX rear brake systems.
Key Features
- Fits 1994-1998 Nissan 240SX, rear
- Fits 1996 Nissan 240SX, rear, with production to 6/96 or from 7/96, including 5-lug wheel configurations where noted
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-67087
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is built for rear brake service on the Nissan 240SX. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the non-directional finish supports consistent pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper spring tension and caliper movement during brake service. This part number, 4512-67087, is a direct-fit rear brake kit for the listed Nissan 240SX applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking consistency from worn friction components
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 1994-1998 Nissan 240SX rear brake service, including 1996 vehicles with the listed production-date and 5-lug wheel notes. Before installation, verify rotor size, wheel configuration, and production date against the vehicle. Clean all mating surfaces, inspect caliper condition, and follow the manufacturer’s bedding procedure after installation. The coated rotor surface is designed to be installed dry and will be swept away by the pads during normal use.
Quality Assurance
DFC states that each rotor is inspected for balance and critical specifications, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Rear Brake Kit for Nissan 240SX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67087, is a rear disc brake kit for select Nissan 240SX applications. It combines coated rotors, ceramic brake pads, and matching hardware for a service-ready brake repair on 1994-1998 Nissan 240SX rear brake systems.
Key Features
- Fits 1994-1998 Nissan 240SX, rear
- Fits 1996 Nissan 240SX, rear, with production to 6/96 or from 7/96, including 5-lug wheel configurations where noted
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-67087
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is built for rear brake service on the Nissan 240SX. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the non-directional finish supports consistent pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper spring tension and caliper movement during brake service. This part number, 4512-67087, is a direct-fit rear brake kit for the listed Nissan 240SX applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking consistency from worn friction components
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 1994-1998 Nissan 240SX rear brake service, including 1996 vehicles with the listed production-date and 5-lug wheel notes. Before installation, verify rotor size, wheel configuration, and production date against the vehicle. Clean all mating surfaces, inspect caliper condition, and follow the manufacturer’s bedding procedure after installation. The coated rotor surface is designed to be installed dry and will be swept away by the pads during normal use.
Quality Assurance
DFC states that each rotor is inspected for balance and critical specifications, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Original: $118.32
-65%$118.32
$41.41Description
Rear Brake Kit for Nissan 240SX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67087, is a rear disc brake kit for select Nissan 240SX applications. It combines coated rotors, ceramic brake pads, and matching hardware for a service-ready brake repair on 1994-1998 Nissan 240SX rear brake systems.
Key Features
- Fits 1994-1998 Nissan 240SX, rear
- Fits 1996 Nissan 240SX, rear, with production to 6/96 or from 7/96, including 5-lug wheel configurations where noted
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-67087
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is built for rear brake service on the Nissan 240SX. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The coated surface helps resist rust, while the non-directional finish supports consistent pad contact and quieter stops. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. The included hardware kit is engineered to restore proper spring tension and caliper movement during brake service. This part number, 4512-67087, is a direct-fit rear brake kit for the listed Nissan 240SX applications.
Common Brake Issues This Kit Can Address
- Rear brake noise, squeal, or vibration
- Rust buildup on rotor surfaces
- Uneven or premature pad wear
- Reduced braking consistency from worn friction components
- Corroded or fatigued brake hardware
Installation Notes
Compatible With 1994-1998 Nissan 240SX rear brake service, including 1996 vehicles with the listed production-date and 5-lug wheel notes. Before installation, verify rotor size, wheel configuration, and production date against the vehicle. Clean all mating surfaces, inspect caliper condition, and follow the manufacturer’s bedding procedure after installation. The coated rotor surface is designed to be installed dry and will be swept away by the pads during normal use.
Quality Assurance
DFC states that each rotor is inspected for balance and critical specifications, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
