Dynamite Friction 4512-67081 Disc Brake Kit - Rear
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC brake kit combines coated rotors, 5000 Advanced brake pads, and matching hardware in one service package. It is built for drivers who want a complete disc brake kit with OE-style fit, stable braking performance, and corrosion protection.
Part number 4512-67081 is part of the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line, which is designed to simplify brake service with matched components for front, rear, or full-axle applications.
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-spec cast iron rotor construction for durability and stability
Brake Kit Details
DFC 5000 Advanced brake pads are formulated for axle-specific braking demands and are assembled with premium shims to improve NVH control. The pads are post-cured for stable friction performance and scorched to reduce initial break-in time. DFC GeoSpec rotors use a coated surface that resists rust better than conventional paint or zinc finishes, while the machined surface and balance inspection help maintain smooth operation. The part number 4512-67081 is a practical choice for brake service on vehicles that need a matched rotor-and-pad replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Install as a complete brake service and inspect caliper condition, slide points, and mounting surfaces before assembly. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during wheel installation. The dry rotor finish is ready for installation, and the pad surface is designed to reduce the need for an extended break-in period.
Compatible With select vehicle applications listed for this part number, including fitment-specific brake service on the correct axle position. Fits the exact year, make, model, and position shown in the catalog application data for this kit.
Quality Assurance
Each DFC GeoSpec rotor is manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC brake kit combines coated rotors, 5000 Advanced brake pads, and matching hardware in one service package. It is built for drivers who want a complete disc brake kit with OE-style fit, stable braking performance, and corrosion protection.
Part number 4512-67081 is part of the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line, which is designed to simplify brake service with matched components for front, rear, or full-axle applications.
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-spec cast iron rotor construction for durability and stability
Brake Kit Details
DFC 5000 Advanced brake pads are formulated for axle-specific braking demands and are assembled with premium shims to improve NVH control. The pads are post-cured for stable friction performance and scorched to reduce initial break-in time. DFC GeoSpec rotors use a coated surface that resists rust better than conventional paint or zinc finishes, while the machined surface and balance inspection help maintain smooth operation. The part number 4512-67081 is a practical choice for brake service on vehicles that need a matched rotor-and-pad replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Install as a complete brake service and inspect caliper condition, slide points, and mounting surfaces before assembly. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during wheel installation. The dry rotor finish is ready for installation, and the pad surface is designed to reduce the need for an extended break-in period.
Compatible With select vehicle applications listed for this part number, including fitment-specific brake service on the correct axle position. Fits the exact year, make, model, and position shown in the catalog application data for this kit.
Quality Assurance
Each DFC GeoSpec rotor is manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
Description
DFC Brake Kit with GeoSpec Rotors
The Dynamite Friction DFC brake kit combines coated rotors, 5000 Advanced brake pads, and matching hardware in one service package. It is built for drivers who want a complete disc brake kit with OE-style fit, stable braking performance, and corrosion protection.
Part number 4512-67081 is part of the DFC Geospec Rotors with 5000 Advanced Brake Pads includes Hardware line, which is designed to simplify brake service with matched components for front, rear, or full-axle applications.
- Complete disc brake kit with rotors, pads, and hardware
- DFC GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- 5000 Advanced pads are post-cured and scorched for consistent friction
- Premium rubber-steel-rubber shims help reduce noise and vibration
- Non-directional rotor finish supports even pad bed-in and smoother stops
- OE-spec cast iron rotor construction for durability and stability
Brake Kit Details
DFC 5000 Advanced brake pads are formulated for axle-specific braking demands and are assembled with premium shims to improve NVH control. The pads are post-cured for stable friction performance and scorched to reduce initial break-in time. DFC GeoSpec rotors use a coated surface that resists rust better than conventional paint or zinc finishes, while the machined surface and balance inspection help maintain smooth operation. The part number 4512-67081 is a practical choice for brake service on vehicles that need a matched rotor-and-pad replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Install as a complete brake service and inspect caliper condition, slide points, and mounting surfaces before assembly. Clean the hub face thoroughly so the coated rotor seats flat, and follow proper torque procedures during wheel installation. The dry rotor finish is ready for installation, and the pad surface is designed to reduce the need for an extended break-in period.
Compatible With select vehicle applications listed for this part number, including fitment-specific brake service on the correct axle position. Fits the exact year, make, model, and position shown in the catalog application data for this kit.
Quality Assurance
Each DFC GeoSpec rotor is manufactured to OE specifications, machined to tight tolerances, and inspected for critical dimensions and balance. DFC states that every rotor includes a 12-month warranty against defects in material and workmanship.
