Dynamite Friction 4512-67079 Disc Brake Kit - Rear
Rear Brake Kit for Nissan 300ZX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67079, is a rear disc brake kit built for the Nissan 300ZX. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on select 1989-1996 Nissan 300ZX applications.
Key Features
- Rear disc brake kit for 1989-1996 Nissan 300ZX applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bed-in
- Part number 4512-67079
Product Details
DFC built this brake service kit to match OE-style requirements for rear braking performance on the Nissan 300ZX. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then finished for more even pad contact and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction behavior from the first stop, while the included hardware is engineered to restore proper spring tension and caliper movement. This part number 4512-67079 is a direct fit for rear brake service on the Nissan 300ZX across the listed model years.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 1989-1996 Nissan 300ZX rear brake service, with notes for 1990 vehicles built before 6/90 and from 7/90, plus 1989 vehicles built from 2/89. Inspect calipers, slides, and mounting points before installation. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function standards.
Rear Brake Kit for Nissan 300ZX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67079, is a rear disc brake kit built for the Nissan 300ZX. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on select 1989-1996 Nissan 300ZX applications.
Key Features
- Rear disc brake kit for 1989-1996 Nissan 300ZX applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bed-in
- Part number 4512-67079
Product Details
DFC built this brake service kit to match OE-style requirements for rear braking performance on the Nissan 300ZX. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then finished for more even pad contact and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction behavior from the first stop, while the included hardware is engineered to restore proper spring tension and caliper movement. This part number 4512-67079 is a direct fit for rear brake service on the Nissan 300ZX across the listed model years.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 1989-1996 Nissan 300ZX rear brake service, with notes for 1990 vehicles built before 6/90 and from 7/90, plus 1989 vehicles built from 2/89. Inspect calipers, slides, and mounting points before installation. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function standards.
Description
Rear Brake Kit for Nissan 300ZX
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-67079, is a rear disc brake kit built for the Nissan 300ZX. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on select 1989-1996 Nissan 300ZX applications.
Key Features
- Rear disc brake kit for 1989-1996 Nissan 300ZX applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotor machining includes a non-directional finish for smoother pad bed-in
- Part number 4512-67079
Product Details
DFC built this brake service kit to match OE-style requirements for rear braking performance on the Nissan 300ZX. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor castings use G3000/G11H18 cast iron specifications and are machined to tight tolerances, then finished for more even pad contact and quieter operation. The 5000 Advanced ceramic pads are post cured and scorched for stable friction behavior from the first stop, while the included hardware is engineered to restore proper spring tension and caliper movement. This part number 4512-67079 is a direct fit for rear brake service on the Nissan 300ZX across the listed model years.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced stopping performance from worn rotors and pads
- Brake pulsation related to rotor wear or finish issues
- Rust buildup on exposed rotor surfaces
Installation Notes
Compatible With 1989-1996 Nissan 300ZX rear brake service, with notes for 1990 vehicles built before 6/90 and from 7/90, plus 1989 vehicles built from 2/89. Inspect calipers, slides, and mounting points before installation. Clean the rotor friction surfaces before assembly if needed, and follow the vehicle manufacturer’s bedding procedure after installation. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor carries a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function standards.
