Dynamite Friction 4512-65053 Disc Brake Kit - Rear
Rear Brake Kit for Camaro and CT6
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-65053, is a rear disc brake kit built for OE-style service on select Chevrolet Camaro and Cadillac CT6 applications. It combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- OE-spec cast iron formulation and tight machining tolerances
- 12-month warranty against defects in material and workmanship
Product Details
The DFC 5000 Advanced pad formulation is developed for modern braking systems that require stable friction characteristics and consistent pedal response. Each pad is post-cured and scorched to help remove uncured bonding agents, which supports more immediate stopping performance after installation. The included shims are designed to reduce brake noise and vibration during everyday driving.
The GEOSPEC coated rotors are processed dry and ready to install, with no oil coating to clean off before service. Their coated surface helps resist rust better than conventional paint or zinc finishes, while the machined non-directional surface promotes smoother pad bedding. Part number 4512-65053 is a practical choice for rear brake service on a 2016-2024 Chevrolet Camaro rear brake kit application and 2016-2020 Cadillac CT6 rear brake kit application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For
- Rear brake rotor wear and pad replacement
- Brake noise from worn hardware or fatigued shims
- Uneven braking feel caused by aged friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn rear brake components
Installation Notes
Compatible With select rear brake applications only. Verify caliper type, engine, and brake package details before ordering, especially on Camaro and CT6 models with configuration-specific notes. The rotors are shipped dry and ready for installation, which can reduce prep time during service. Follow proper brake service procedures, clean mating surfaces, and bed the pads and rotors according to standard brake-in practice.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, precision machining, balance inspection on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Camaro and CT6
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-65053, is a rear disc brake kit built for OE-style service on select Chevrolet Camaro and Cadillac CT6 applications. It combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- OE-spec cast iron formulation and tight machining tolerances
- 12-month warranty against defects in material and workmanship
Product Details
The DFC 5000 Advanced pad formulation is developed for modern braking systems that require stable friction characteristics and consistent pedal response. Each pad is post-cured and scorched to help remove uncured bonding agents, which supports more immediate stopping performance after installation. The included shims are designed to reduce brake noise and vibration during everyday driving.
The GEOSPEC coated rotors are processed dry and ready to install, with no oil coating to clean off before service. Their coated surface helps resist rust better than conventional paint or zinc finishes, while the machined non-directional surface promotes smoother pad bedding. Part number 4512-65053 is a practical choice for rear brake service on a 2016-2024 Chevrolet Camaro rear brake kit application and 2016-2020 Cadillac CT6 rear brake kit application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For
- Rear brake rotor wear and pad replacement
- Brake noise from worn hardware or fatigued shims
- Uneven braking feel caused by aged friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn rear brake components
Installation Notes
Compatible With select rear brake applications only. Verify caliper type, engine, and brake package details before ordering, especially on Camaro and CT6 models with configuration-specific notes. The rotors are shipped dry and ready for installation, which can reduce prep time during service. Follow proper brake service procedures, clean mating surfaces, and bed the pads and rotors according to standard brake-in practice.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, precision machining, balance inspection on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $205.44
-65%$205.44
$71.90Description
Rear Brake Kit for Camaro and CT6
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-65053, is a rear disc brake kit built for OE-style service on select Chevrolet Camaro and Cadillac CT6 applications. It combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete rear brake refresh.
Key Features
- Rear disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and quieter stops
- OE-spec cast iron formulation and tight machining tolerances
- 12-month warranty against defects in material and workmanship
Product Details
The DFC 5000 Advanced pad formulation is developed for modern braking systems that require stable friction characteristics and consistent pedal response. Each pad is post-cured and scorched to help remove uncured bonding agents, which supports more immediate stopping performance after installation. The included shims are designed to reduce brake noise and vibration during everyday driving.
The GEOSPEC coated rotors are processed dry and ready to install, with no oil coating to clean off before service. Their coated surface helps resist rust better than conventional paint or zinc finishes, while the machined non-directional surface promotes smoother pad bedding. Part number 4512-65053 is a practical choice for rear brake service on a 2016-2024 Chevrolet Camaro rear brake kit application and 2016-2020 Cadillac CT6 rear brake kit application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Used For
- Rear brake rotor wear and pad replacement
- Brake noise from worn hardware or fatigued shims
- Uneven braking feel caused by aged friction material
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn rear brake components
Installation Notes
Compatible With select rear brake applications only. Verify caliper type, engine, and brake package details before ordering, especially on Camaro and CT6 models with configuration-specific notes. The rotors are shipped dry and ready for installation, which can reduce prep time during service. Follow proper brake service procedures, clean mating surfaces, and bed the pads and rotors according to standard brake-in practice.
Quality Assurance
DFC manufactures the rotors to OE specifications using G3000/G11H18 cast iron, precision machining, balance inspection on vented rotors, and final inspection of critical dimensions. The rotors include a 12-month warranty against defects in material and workmanship.
