Dynamite Friction 4512-65048 Disc Brake Kit - Front
Brake Kit for Saab 9-3 Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front disc brake kit built for specific Saab 9-3 applications. Part number 4512-65048 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2008-2011 Saab 9-3 models.
Compatible With 2008-2011 Saab 9-3 front brake service, this kit is aimed at drivers replacing worn rotors and pads while restoring OE-style braking feel. The DFC 4512-65048 package is designed for the 345mm front disc brake setup used on the listed vehicles.
Key Features
- Front disc brake kit for Saab 9-3 applications
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and precision machining
- Part number 4512-65048 for easy identification
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor finish is engineered to resist rust better than conventional paint or zinc coatings, while the non-directional surface supports even pad bed-in and smoother stopping. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. The included hardware is built to OE-style form, fit, and function for consistent caliper movement and pad retention.
Fits 2010-2011 Saab 9-3, front, 345mm front disc brake rotors for vehicles equipped with the performance package. Fits 2008-2009 Saab 9-3, front, 345mm front disc brake rotors. Part number 4512-65048 is the correct reference for these front brake kit applications.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn friction material
- Longer brake service time due to unprepared rotors
Installation Notes and Tips
Confirm the vehicle uses the 345mm front brake setup before ordering. This kit is for front applications only and should be matched to the listed Saab 9-3 model years and notes. Inspect calipers, slides, and mounting points during service, and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance where applicable, and checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-65048 is built as a complete front brake service solution for the listed Saab 9-3 applications.
Brake Kit for Saab 9-3 Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front disc brake kit built for specific Saab 9-3 applications. Part number 4512-65048 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2008-2011 Saab 9-3 models.
Compatible With 2008-2011 Saab 9-3 front brake service, this kit is aimed at drivers replacing worn rotors and pads while restoring OE-style braking feel. The DFC 4512-65048 package is designed for the 345mm front disc brake setup used on the listed vehicles.
Key Features
- Front disc brake kit for Saab 9-3 applications
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and precision machining
- Part number 4512-65048 for easy identification
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor finish is engineered to resist rust better than conventional paint or zinc coatings, while the non-directional surface supports even pad bed-in and smoother stopping. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. The included hardware is built to OE-style form, fit, and function for consistent caliper movement and pad retention.
Fits 2010-2011 Saab 9-3, front, 345mm front disc brake rotors for vehicles equipped with the performance package. Fits 2008-2009 Saab 9-3, front, 345mm front disc brake rotors. Part number 4512-65048 is the correct reference for these front brake kit applications.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn friction material
- Longer brake service time due to unprepared rotors
Installation Notes and Tips
Confirm the vehicle uses the 345mm front brake setup before ordering. This kit is for front applications only and should be matched to the listed Saab 9-3 model years and notes. Inspect calipers, slides, and mounting points during service, and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance where applicable, and checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-65048 is built as a complete front brake service solution for the listed Saab 9-3 applications.
Original: $296.76
-65%$296.76
$103.87Description
Brake Kit for Saab 9-3 Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a front disc brake kit built for specific Saab 9-3 applications. Part number 4512-65048 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake service on 2008-2011 Saab 9-3 models.
Compatible With 2008-2011 Saab 9-3 front brake service, this kit is aimed at drivers replacing worn rotors and pads while restoring OE-style braking feel. The DFC 4512-65048 package is designed for the 345mm front disc brake setup used on the listed vehicles.
Key Features
- Front disc brake kit for Saab 9-3 applications
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for reduced noise and vibration
- Hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and precision machining
- Part number 4512-65048 for easy identification
Product Details
DFC GEOSPEC rotors are processed dry and ready to install, which helps reduce prep time during brake service. The rotor finish is engineered to resist rust better than conventional paint or zinc coatings, while the non-directional surface supports even pad bed-in and smoother stopping. The 5000 Advanced pads are post-cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. The included hardware is built to OE-style form, fit, and function for consistent caliper movement and pad retention.
Fits 2010-2011 Saab 9-3, front, 345mm front disc brake rotors for vehicles equipped with the performance package. Fits 2008-2009 Saab 9-3, front, 345mm front disc brake rotors. Part number 4512-65048 is the correct reference for these front brake kit applications.
Common Brake Issues This Kit Can Address
- Rotor rust and surface corrosion
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by aged hardware components
- Reduced stopping performance from worn friction material
- Longer brake service time due to unprepared rotors
Installation Notes and Tips
Confirm the vehicle uses the 345mm front brake setup before ordering. This kit is for front applications only and should be matched to the listed Saab 9-3 model years and notes. Inspect calipers, slides, and mounting points during service, and follow proper brake bedding procedures after installation to help the pads and rotors seat evenly.
Quality Assurance
DFC rotors are machined to tight tolerances, inspected for balance where applicable, and checked against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-65048 is built as a complete front brake service solution for the listed Saab 9-3 applications.
