Dynamite Friction 4512-63227 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz GLE and ML
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63227, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on covered GLE and ML models.
Key Features
- Rear disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor design with no oil coating to clean before installation
- Non-directional rotor finish for more even pad bed-in and quieter braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC builds this brake service kit around OE-style fit, form, and function. The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced ceramic pads are formulated for consistent friction across a range of driving conditions, while the included hardware is designed to restore proper caliper movement and spring tension during brake service. This part number 4512-63227 is a practical choice for rear brake replacement on Mercedes-Benz GLE43 AMG and ML350 applications, including 2012-2015 Mercedes-Benz ML350 rear models with AMG Sport Package rear rotor configurations and 2016-2017 Mercedes-Benz GLE500 rear models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by unprepared rotors
Installation Notes
Compatible With 2017-2019 Mercedes-Benz GLE43 AMG, rear; 2016-2017 Mercedes-Benz GLE500, rear; and 2012-2015 Mercedes-Benz ML350, rear. For 2012-2015 Mercedes-Benz ML350 rear applications, verify whether the vehicle uses the AMG Sport Package and the correct rear rotor configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Always confirm axle position and rotor style against the vehicle before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and OE-focused hardware design to support consistent brake service results.
Rear Brake Kit for Mercedes-Benz GLE and ML
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63227, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on covered GLE and ML models.
Key Features
- Rear disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor design with no oil coating to clean before installation
- Non-directional rotor finish for more even pad bed-in and quieter braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC builds this brake service kit around OE-style fit, form, and function. The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced ceramic pads are formulated for consistent friction across a range of driving conditions, while the included hardware is designed to restore proper caliper movement and spring tension during brake service. This part number 4512-63227 is a practical choice for rear brake replacement on Mercedes-Benz GLE43 AMG and ML350 applications, including 2012-2015 Mercedes-Benz ML350 rear models with AMG Sport Package rear rotor configurations and 2016-2017 Mercedes-Benz GLE500 rear models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by unprepared rotors
Installation Notes
Compatible With 2017-2019 Mercedes-Benz GLE43 AMG, rear; 2016-2017 Mercedes-Benz GLE500, rear; and 2012-2015 Mercedes-Benz ML350, rear. For 2012-2015 Mercedes-Benz ML350 rear applications, verify whether the vehicle uses the AMG Sport Package and the correct rear rotor configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Always confirm axle position and rotor style against the vehicle before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and OE-focused hardware design to support consistent brake service results.
Description
Rear Brake Kit for Mercedes-Benz GLE and ML
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63227, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete rear brake service on covered GLE and ML models.
Key Features
- Rear disc brake kit with rotors, 5000 Advanced ceramic pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor design with no oil coating to clean before installation
- Non-directional rotor finish for more even pad bed-in and quieter braking
- 100% post-cured brake pads for stable friction performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC builds this brake service kit around OE-style fit, form, and function. The GEOSPEC rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and inspected for critical dimensions and balance. The 5000 Advanced ceramic pads are formulated for consistent friction across a range of driving conditions, while the included hardware is designed to restore proper caliper movement and spring tension during brake service. This part number 4512-63227 is a practical choice for rear brake replacement on Mercedes-Benz GLE43 AMG and ML350 applications, including 2012-2015 Mercedes-Benz ML350 rear models with AMG Sport Package rear rotor configurations and 2016-2017 Mercedes-Benz GLE500 rear models.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced braking consistency from worn rear rotors
- Rust buildup on exposed rotor surfaces
- Longer brake service time caused by unprepared rotors
Installation Notes
Compatible With 2017-2019 Mercedes-Benz GLE43 AMG, rear; 2016-2017 Mercedes-Benz GLE500, rear; and 2012-2015 Mercedes-Benz ML350, rear. For 2012-2015 Mercedes-Benz ML350 rear applications, verify whether the vehicle uses the AMG Sport Package and the correct rear rotor configuration before ordering. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Always confirm axle position and rotor style against the vehicle before installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected after machining to verify critical specifications, and vented rotors are balance-checked and corrected when needed. The rotors carry a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and OE-focused hardware design to support consistent brake service results.
