Dynamite Friction 4512-63168 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63168, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors and 5000 Advanced ceramic brake pads
- Fits 2004-2009 Mercedes-Benz SL600, rear
- Fits 2003-2006 Mercedes-Benz SL55 AMG, rear
- Fits 2007-2008 Mercedes-Benz SL55 AMG, rear; 8-piston front calipers noted in fitment
- Rotors use a dry, ready-to-install coated finish that helps resist rust
- Brake pads are post-cured, scorched, and paired with rubber-steel-rubber shims for NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number: 4512-63168
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smooth braking. The coated surface is intended to reduce corrosion on the rotor hat and non-friction areas, while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent initial bite, and the included hardware is engineered to restore proper caliper movement and spring tension. This rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG is a practical choice for drivers replacing worn rear brake components on these chassis. Part number 4512-63168 is also a useful reference when searching for a rear brake kit for Mercedes-Benz SL600 or SL55 AMG.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced braking response from worn rear rotors
- Rotor rust on exposed surfaces
- Brake vibration or rough stopping feel from aged rear brake components
Installation Notes
Confirm rear axle fitment before ordering, especially on 2007-2008 Mercedes-Benz SL55 AMG models with 8-piston front calipers noted in the fitment data. Clean the rotor friction surfaces before assembly, follow the vehicle manufacturer’s torque specifications, and complete a proper pad bed-in procedure after installation. This kit is listed for rear applications only.
Quality Assurance
DFC rotors are machined to OE-style tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63168, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors and 5000 Advanced ceramic brake pads
- Fits 2004-2009 Mercedes-Benz SL600, rear
- Fits 2003-2006 Mercedes-Benz SL55 AMG, rear
- Fits 2007-2008 Mercedes-Benz SL55 AMG, rear; 8-piston front calipers noted in fitment
- Rotors use a dry, ready-to-install coated finish that helps resist rust
- Brake pads are post-cured, scorched, and paired with rubber-steel-rubber shims for NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number: 4512-63168
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smooth braking. The coated surface is intended to reduce corrosion on the rotor hat and non-friction areas, while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent initial bite, and the included hardware is engineered to restore proper caliper movement and spring tension. This rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG is a practical choice for drivers replacing worn rear brake components on these chassis. Part number 4512-63168 is also a useful reference when searching for a rear brake kit for Mercedes-Benz SL600 or SL55 AMG.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced braking response from worn rear rotors
- Rotor rust on exposed surfaces
- Brake vibration or rough stopping feel from aged rear brake components
Installation Notes
Confirm rear axle fitment before ordering, especially on 2007-2008 Mercedes-Benz SL55 AMG models with 8-piston front calipers noted in the fitment data. Clean the rotor friction surfaces before assembly, follow the vehicle manufacturer’s torque specifications, and complete a proper pad bed-in procedure after installation. This kit is listed for rear applications only.
Quality Assurance
DFC rotors are machined to OE-style tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship.
Description
Rear Brake Kit for Mercedes-Benz SL600 and SL55 AMG
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63168, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed vehicles.
Key Features
- Rear disc brake kit with GEOSPEC coated rotors and 5000 Advanced ceramic brake pads
- Fits 2004-2009 Mercedes-Benz SL600, rear
- Fits 2003-2006 Mercedes-Benz SL55 AMG, rear
- Fits 2007-2008 Mercedes-Benz SL55 AMG, rear; 8-piston front calipers noted in fitment
- Rotors use a dry, ready-to-install coated finish that helps resist rust
- Brake pads are post-cured, scorched, and paired with rubber-steel-rubber shims for NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number: 4512-63168
Product Details
The DFC GEOSPEC rotor design uses G3000/G11H18 cast iron and a non-directional finish to support even pad bedding and smooth braking. The coated surface is intended to reduce corrosion on the rotor hat and non-friction areas, while the dry packaging eliminates the need to clean off oil before installation. The 5000 Advanced ceramic pads are formulated for stable friction performance and consistent initial bite, and the included hardware is engineered to restore proper caliper movement and spring tension. This rear brake kit for Mercedes-Benz SL600 and Mercedes-Benz SL55 AMG is a practical choice for drivers replacing worn rear brake components on these chassis. Part number 4512-63168 is also a useful reference when searching for a rear brake kit for Mercedes-Benz SL600 or SL55 AMG.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Reduced braking response from worn rear rotors
- Rotor rust on exposed surfaces
- Brake vibration or rough stopping feel from aged rear brake components
Installation Notes
Confirm rear axle fitment before ordering, especially on 2007-2008 Mercedes-Benz SL55 AMG models with 8-piston front calipers noted in the fitment data. Clean the rotor friction surfaces before assembly, follow the vehicle manufacturer’s torque specifications, and complete a proper pad bed-in procedure after installation. This kit is listed for rear applications only.
Quality Assurance
DFC rotors are machined to OE-style tolerances, inspected for critical dimensions, and balanced where required. The rotors include a 12-month warranty against defects in material and workmanship.
