Dynamite Friction 4512-63166 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63166, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed CL500, S350, S430, and S500 models.
Key Features
- Rear disc brake kit for select 2003-2006 Mercedes-Benz CL500, S350, S430, and S500 applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63166
Product Details
The DFC GEOSPEC product line focuses on OE-style rotor construction with added corrosion protection and precise machining. These rear rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pad set is formulated for consistent friction, while the included hardware is engineered to restore proper caliper movement and spring tension on the rear axle. This makes 4512-63166 a practical choice for a rear brake refresh on Mercedes-Benz CL500 and S-Class models where smooth stopping, reduced noise, and reliable pedal feel matter.
Vehicle Fitment
- Fits 2004-2006 Mercedes-Benz CL500, rear
- Fits 2006 Mercedes-Benz S350, rear
- Fits 2004-2006 Mercedes-Benz S430, rear
- Fits 2004-2006 Mercedes-Benz S500, rear
- Fits 2003 Mercedes-Benz CL500, rear; from chassis number A032-100
- Fits 2003 Mercedes-Benz S430, rear; solid rear rotors
- Fits 2003 Mercedes-Benz S500, rear; solid rear rotors
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness during stop-and-go driving
- Longer stopping distances caused by worn rear components
Installation Notes
Confirm rear axle configuration before ordering, especially for 2003 Mercedes-Benz S430 and S500 models with solid rear rotors and the 2003 CL500 chassis break noted in fitment. Inspect calipers, slides, and mounting points during service, and replace worn components as needed to restore proper brake operation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the finished rotor is checked against OE specifications. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built with corrosion-resistant materials for consistent fit and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63166 is engineered for dependable rear brake service on compatible Mercedes-Benz applications.
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63166, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed CL500, S350, S430, and S500 models.
Key Features
- Rear disc brake kit for select 2003-2006 Mercedes-Benz CL500, S350, S430, and S500 applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63166
Product Details
The DFC GEOSPEC product line focuses on OE-style rotor construction with added corrosion protection and precise machining. These rear rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pad set is formulated for consistent friction, while the included hardware is engineered to restore proper caliper movement and spring tension on the rear axle. This makes 4512-63166 a practical choice for a rear brake refresh on Mercedes-Benz CL500 and S-Class models where smooth stopping, reduced noise, and reliable pedal feel matter.
Vehicle Fitment
- Fits 2004-2006 Mercedes-Benz CL500, rear
- Fits 2006 Mercedes-Benz S350, rear
- Fits 2004-2006 Mercedes-Benz S430, rear
- Fits 2004-2006 Mercedes-Benz S500, rear
- Fits 2003 Mercedes-Benz CL500, rear; from chassis number A032-100
- Fits 2003 Mercedes-Benz S430, rear; solid rear rotors
- Fits 2003 Mercedes-Benz S500, rear; solid rear rotors
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness during stop-and-go driving
- Longer stopping distances caused by worn rear components
Installation Notes
Confirm rear axle configuration before ordering, especially for 2003 Mercedes-Benz S430 and S500 models with solid rear rotors and the 2003 CL500 chassis break noted in fitment. Inspect calipers, slides, and mounting points during service, and replace worn components as needed to restore proper brake operation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the finished rotor is checked against OE specifications. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built with corrosion-resistant materials for consistent fit and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63166 is engineered for dependable rear brake service on compatible Mercedes-Benz applications.
Description
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63166, is a rear disc brake kit built for select Mercedes-Benz applications. It combines coated rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service on the listed CL500, S350, S430, and S500 models.
Key Features
- Rear disc brake kit for select 2003-2006 Mercedes-Benz CL500, S350, S430, and S500 applications
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63166
Product Details
The DFC GEOSPEC product line focuses on OE-style rotor construction with added corrosion protection and precise machining. These rear rotors are made to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The ceramic pad set is formulated for consistent friction, while the included hardware is engineered to restore proper caliper movement and spring tension on the rear axle. This makes 4512-63166 a practical choice for a rear brake refresh on Mercedes-Benz CL500 and S-Class models where smooth stopping, reduced noise, and reliable pedal feel matter.
Vehicle Fitment
- Fits 2004-2006 Mercedes-Benz CL500, rear
- Fits 2006 Mercedes-Benz S350, rear
- Fits 2004-2006 Mercedes-Benz S430, rear
- Fits 2004-2006 Mercedes-Benz S500, rear
- Fits 2003 Mercedes-Benz CL500, rear; from chassis number A032-100
- Fits 2003 Mercedes-Benz S430, rear; solid rear rotors
- Fits 2003 Mercedes-Benz S500, rear; solid rear rotors
Common Brake Service Issues
- Rear brake noise, squeal, or vibration
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from fatigued hardware
- Reduced braking smoothness during stop-and-go driving
- Longer stopping distances caused by worn rear components
Installation Notes
Confirm rear axle configuration before ordering, especially for 2003 Mercedes-Benz S430 and S500 models with solid rear rotors and the 2003 CL500 chassis break noted in fitment. Inspect calipers, slides, and mounting points during service, and replace worn components as needed to restore proper brake operation. This kit is intended for rear brake service only.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the finished rotor is checked against OE specifications. DFC 5000 Advanced pads are post-cured and scorched for stable performance, and the hardware kit is built with corrosion-resistant materials for consistent fit and function. Rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63166 is engineered for dependable rear brake service on compatible Mercedes-Benz applications.
