Dynamite Friction 4512-63137 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63137, is a rear disc brake kit for select 2000-2003 Mercedes-Benz CL500, S430, and S500 applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service.
Key Features
- Rear disc brake kit for select Mercedes-Benz CL500, S430, and S500 models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63137 for rear brake service on covered Mercedes-Benz applications
Product Details
The DFC GEOSPEC rotor design is machined to OE-style tolerances and uses G3000/G11H18 cast iron for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during a rear brake job on a Mercedes-Benz CL500, S430, or S500. The ceramic pad formulation is built for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4512-63137 is a direct rear brake service solution for 2000-2003 Mercedes-Benz CL500, S430, and S500 fitments listed below.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rear brake components
- Longer stopping distances caused by worn friction material
- Vibration or harshness during rear brake application
Installation Notes
Fits 2003 Mercedes-Benz CL500, rear, to chassis number A-032-099. Fits 2003 Mercedes-Benz S430, rear, vented rear rotors. Fits 2003 Mercedes-Benz S500, rear, vented rear rotors. Fits 2002 Mercedes-Benz CL500, rear. Fits 2000-2002 Mercedes-Benz S430, rear. Fits 2002 Mercedes-Benz S500, rear, vehicle production date to 8/02 or from 9/02. Fits 2000-2001 Mercedes-Benz CL500, rear, to chassis number A-024-509. Fits 2000-2001 Mercedes-Benz S500, rear. Verify chassis number, production date, and rear rotor configuration before installation. This rear brake kit is intended for applications listed in the fitment table and should be installed as a complete axle service for consistent braking performance.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are 100% inspected for critical dimensions and balance. DFC GEOSPEC coated rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63137 is built for covered Mercedes-Benz rear brake applications with OE-focused fit and finish.
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63137, is a rear disc brake kit for select 2000-2003 Mercedes-Benz CL500, S430, and S500 applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service.
Key Features
- Rear disc brake kit for select Mercedes-Benz CL500, S430, and S500 models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63137 for rear brake service on covered Mercedes-Benz applications
Product Details
The DFC GEOSPEC rotor design is machined to OE-style tolerances and uses G3000/G11H18 cast iron for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during a rear brake job on a Mercedes-Benz CL500, S430, or S500. The ceramic pad formulation is built for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4512-63137 is a direct rear brake service solution for 2000-2003 Mercedes-Benz CL500, S430, and S500 fitments listed below.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rear brake components
- Longer stopping distances caused by worn friction material
- Vibration or harshness during rear brake application
Installation Notes
Fits 2003 Mercedes-Benz CL500, rear, to chassis number A-032-099. Fits 2003 Mercedes-Benz S430, rear, vented rear rotors. Fits 2003 Mercedes-Benz S500, rear, vented rear rotors. Fits 2002 Mercedes-Benz CL500, rear. Fits 2000-2002 Mercedes-Benz S430, rear. Fits 2002 Mercedes-Benz S500, rear, vehicle production date to 8/02 or from 9/02. Fits 2000-2001 Mercedes-Benz CL500, rear, to chassis number A-024-509. Fits 2000-2001 Mercedes-Benz S500, rear. Verify chassis number, production date, and rear rotor configuration before installation. This rear brake kit is intended for applications listed in the fitment table and should be installed as a complete axle service for consistent braking performance.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are 100% inspected for critical dimensions and balance. DFC GEOSPEC coated rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63137 is built for covered Mercedes-Benz rear brake applications with OE-focused fit and finish.
Original: $172.59
-65%$172.59
$60.41Description
Rear Brake Kit for Mercedes-Benz CL500 and S-Class
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-63137, is a rear disc brake kit for select 2000-2003 Mercedes-Benz CL500, S430, and S500 applications. It combines coated rear rotors, ceramic brake pads, and matching brake hardware for a complete rear brake service.
Key Features
- Rear disc brake kit for select Mercedes-Benz CL500, S430, and S500 models
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-63137 for rear brake service on covered Mercedes-Benz applications
Product Details
The DFC GEOSPEC rotor design is machined to OE-style tolerances and uses G3000/G11H18 cast iron for durability and stable braking performance. Each rotor is processed dry and ready to install, which helps reduce prep time during a rear brake job on a Mercedes-Benz CL500, S430, or S500. The ceramic pad formulation is built for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise and uneven wear. This part number 4512-63137 is a direct rear brake service solution for 2000-2003 Mercedes-Benz CL500, S430, and S500 fitments listed below.
What This Brake Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rear brake components
- Longer stopping distances caused by worn friction material
- Vibration or harshness during rear brake application
Installation Notes
Fits 2003 Mercedes-Benz CL500, rear, to chassis number A-032-099. Fits 2003 Mercedes-Benz S430, rear, vented rear rotors. Fits 2003 Mercedes-Benz S500, rear, vented rear rotors. Fits 2002 Mercedes-Benz CL500, rear. Fits 2000-2002 Mercedes-Benz S430, rear. Fits 2002 Mercedes-Benz S500, rear, vehicle production date to 8/02 or from 9/02. Fits 2000-2001 Mercedes-Benz CL500, rear, to chassis number A-024-509. Fits 2000-2001 Mercedes-Benz S500, rear. Verify chassis number, production date, and rear rotor configuration before installation. This rear brake kit is intended for applications listed in the fitment table and should be installed as a complete axle service for consistent braking performance.
Quality Assurance
DFC brake pads are post-cured and scorched for stable friction performance, and the rotors are 100% inspected for critical dimensions and balance. DFC GEOSPEC coated rotors include a 12-month warranty against defects in material and workmanship. Part number 4512-63137 is built for covered Mercedes-Benz rear brake applications with OE-focused fit and finish.
