Dynamite Friction 4512-63127 Disc Brake Kit - Rear
Rear Brake Kit for Mercedes-Benz 190E
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for 1984-1986 Mercedes-Benz 190E models equipped with Bendix rear calipers. Part number 4512-63127 combines coated rotors, ceramic brake pads, and brake hardware components in one service kit for a direct rear brake refresh.
Key Features
- Compatible with 1984-1986 Mercedes-Benz 190E rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered for OE-style form, fit, and function
- Part number 4512-63127 for rear disc brake replacement
Product Details
The DFC GEOSPEC rotor design uses a dry-processing, dry-shipping approach so the rotors are ready to install without oil removal or extra prep. The cast iron rotor construction is machined to tight tolerances with a non-directional finish to support even pad bedding and smoother braking. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for consistent caliper operation. This rear brake kit is a practical choice for Mercedes-Benz 190E owners replacing worn rear braking components on Bendix rear calipers.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Rust buildup on exposed brake rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Verify rear Bendix caliper application before installation. Clean the hub mounting surface, inspect caliper slides and related components, and follow proper bedding procedures after installation. The coated rotor surface is designed to be swept away by the pad during normal use, so no additional rotor preparation is required. Confirm fitment by year, make, model, and rear position before ordering part number 4512-63127.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotor line is backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style standards for consistent braking operation. Part number 4512-63127 is engineered for rear service on the Mercedes-Benz 190E platform.
Rear Brake Kit for Mercedes-Benz 190E
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for 1984-1986 Mercedes-Benz 190E models equipped with Bendix rear calipers. Part number 4512-63127 combines coated rotors, ceramic brake pads, and brake hardware components in one service kit for a direct rear brake refresh.
Key Features
- Compatible with 1984-1986 Mercedes-Benz 190E rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered for OE-style form, fit, and function
- Part number 4512-63127 for rear disc brake replacement
Product Details
The DFC GEOSPEC rotor design uses a dry-processing, dry-shipping approach so the rotors are ready to install without oil removal or extra prep. The cast iron rotor construction is machined to tight tolerances with a non-directional finish to support even pad bedding and smoother braking. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for consistent caliper operation. This rear brake kit is a practical choice for Mercedes-Benz 190E owners replacing worn rear braking components on Bendix rear calipers.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Rust buildup on exposed brake rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Verify rear Bendix caliper application before installation. Clean the hub mounting surface, inspect caliper slides and related components, and follow proper bedding procedures after installation. The coated rotor surface is designed to be swept away by the pad during normal use, so no additional rotor preparation is required. Confirm fitment by year, make, model, and rear position before ordering part number 4512-63127.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotor line is backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style standards for consistent braking operation. Part number 4512-63127 is engineered for rear service on the Mercedes-Benz 190E platform.
Description
Rear Brake Kit for Mercedes-Benz 190E
DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware is a rear disc brake kit for 1984-1986 Mercedes-Benz 190E models equipped with Bendix rear calipers. Part number 4512-63127 combines coated rotors, ceramic brake pads, and brake hardware components in one service kit for a direct rear brake refresh.
Key Features
- Compatible with 1984-1986 Mercedes-Benz 190E rear brake service
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit engineered for OE-style form, fit, and function
- Part number 4512-63127 for rear disc brake replacement
Product Details
The DFC GEOSPEC rotor design uses a dry-processing, dry-shipping approach so the rotors are ready to install without oil removal or extra prep. The cast iron rotor construction is machined to tight tolerances with a non-directional finish to support even pad bedding and smoother braking. The 5000 Advanced ceramic pads are formulated for stable friction performance, while the included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for consistent caliper operation. This rear brake kit is a practical choice for Mercedes-Benz 190E owners replacing worn rear braking components on Bendix rear calipers.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Uneven rear pad wear caused by corroded or weakened hardware
- Rust buildup on exposed brake rotor surfaces
- Longer stopping distances from worn friction material
- Brake pulsation related to rotor wear or finish issues
Installation Notes and Tips
Verify rear Bendix caliper application before installation. Clean the hub mounting surface, inspect caliper slides and related components, and follow proper bedding procedures after installation. The coated rotor surface is designed to be swept away by the pad during normal use, so no additional rotor preparation is required. Confirm fitment by year, make, model, and rear position before ordering part number 4512-63127.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotor line is backed by a 12-month warranty against defects in material and workmanship. DFC 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is built to OE-style standards for consistent braking operation. Part number 4512-63127 is engineered for rear service on the Mercedes-Benz 190E platform.
