Dynamite Friction 4512-59197 Disc Brake Kit - Front
Front Brake Kit for Honda and Acura
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Honda and Acura applications. Part number 4512-59197 combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more consistent initial stopping
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Dry-processed rotors that are ready to install
- 12-month warranty against defects in material and workmanship on the rotors
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components needed for a front axle brake job. The GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc coatings, while the 5000 Advanced pad formulation is built for stable friction performance and consistent pedal feel. This combination is suited to drivers looking for a direct replacement brake kit for daily use.
Fitment
- Fits 2023-2026 Acura Integra, front
- Fits 2022-2026 Honda Civic, front
- Fits 2022-2025 Honda Accord, front
- Fits 2018-2021 Honda Accord, front
- Fits 2018-2020 Honda Accord, front, 2.0T Liter Engine
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes
Fits 2022-2026 Honda Civic, front and Fits 2022-2025 Honda Accord, front applications listed above, along with the Acura Integra front fitment shown. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s torque and bedding procedures for proper results. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotor design follows OE-style cast iron specifications for durability and stability, and the set is backed by a 12-month warranty against defects in material and workmanship.
Front Brake Kit for Honda and Acura
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Honda and Acura applications. Part number 4512-59197 combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more consistent initial stopping
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Dry-processed rotors that are ready to install
- 12-month warranty against defects in material and workmanship on the rotors
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components needed for a front axle brake job. The GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc coatings, while the 5000 Advanced pad formulation is built for stable friction performance and consistent pedal feel. This combination is suited to drivers looking for a direct replacement brake kit for daily use.
Fitment
- Fits 2023-2026 Acura Integra, front
- Fits 2022-2026 Honda Civic, front
- Fits 2022-2025 Honda Accord, front
- Fits 2018-2021 Honda Accord, front
- Fits 2018-2020 Honda Accord, front, 2.0T Liter Engine
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes
Fits 2022-2026 Honda Civic, front and Fits 2022-2025 Honda Accord, front applications listed above, along with the Acura Integra front fitment shown. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s torque and bedding procedures for proper results. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotor design follows OE-style cast iron specifications for durability and stability, and the set is backed by a 12-month warranty against defects in material and workmanship.
Description
Front Brake Kit for Honda and Acura
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Honda and Acura applications. Part number 4512-59197 combines coated rotors, ceramic brake pads, and matching hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and more consistent initial stopping
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- Dry-processed rotors that are ready to install
- 12-month warranty against defects in material and workmanship on the rotors
Product Line Details
DFC Complete Brake Kits are organized to simplify brake service by grouping the main wear components needed for a front axle brake job. The GEOSPEC rotor line uses a coated finish to resist rust better than conventional paint or zinc coatings, while the 5000 Advanced pad formulation is built for stable friction performance and consistent pedal feel. This combination is suited to drivers looking for a direct replacement brake kit for daily use.
Fitment
- Fits 2023-2026 Acura Integra, front
- Fits 2022-2026 Honda Civic, front
- Fits 2022-2025 Honda Accord, front
- Fits 2018-2021 Honda Accord, front
- Fits 2018-2020 Honda Accord, front, 2.0T Liter Engine
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer stopping distances caused by worn friction material
- Vibration or harshness during braking
Installation Notes
Fits 2022-2026 Honda Civic, front and Fits 2022-2025 Honda Accord, front applications listed above, along with the Acura Integra front fitment shown. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle manufacturer’s torque and bedding procedures for proper results. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance before release. The rotor design follows OE-style cast iron specifications for durability and stability, and the set is backed by a 12-month warranty against defects in material and workmanship.
