Dynamite Friction 4512-59133 Disc Brake Kit - Front
Front Brake Kit for Honda Fit
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2013-2014 Honda Fit front brake service. It combines coated rotors, ceramic pads, and matched brake hardware in one front disc brake kit for a complete OE-style repair.
Key Features
- Fits 2013-2014 Honda Fit, front
- Part number 4512-59133
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and machining tolerances
Product Details
This front brake kit is engineered for Honda Fit owners who need a direct replacement service kit for the front axle. The DFC GEOSPEC coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation. Part number 4512-59133 is a practical choice for a front brake job on the 2013-2014 Honda Fit when you want rotors, pads, and hardware matched in one package.
The DFC product line focuses on axle-specific friction and OE-style fitment across a wide range of vehicles, including family sedans, performance cars, and light trucks. For this application, the 2013-2014 Honda Fit front brake kit is assembled to support consistent stopping performance and smoother service work.
Common Brake Service Issues
- Front brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven braking feel from worn or out-of-spec rotors
- Longer stopping distances caused by depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Install on the front axle only for 2013-2014 Honda Fit applications. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure for torque and bedding-in. This part number, 4512-59133, is intended for a complete front brake refresh on the listed Honda Fit fitment.
Quality Assurance
DFC GeoSpec rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is built to OE-style form, fit, and function.
Front Brake Kit for Honda Fit
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2013-2014 Honda Fit front brake service. It combines coated rotors, ceramic pads, and matched brake hardware in one front disc brake kit for a complete OE-style repair.
Key Features
- Fits 2013-2014 Honda Fit, front
- Part number 4512-59133
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and machining tolerances
Product Details
This front brake kit is engineered for Honda Fit owners who need a direct replacement service kit for the front axle. The DFC GEOSPEC coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation. Part number 4512-59133 is a practical choice for a front brake job on the 2013-2014 Honda Fit when you want rotors, pads, and hardware matched in one package.
The DFC product line focuses on axle-specific friction and OE-style fitment across a wide range of vehicles, including family sedans, performance cars, and light trucks. For this application, the 2013-2014 Honda Fit front brake kit is assembled to support consistent stopping performance and smoother service work.
Common Brake Service Issues
- Front brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven braking feel from worn or out-of-spec rotors
- Longer stopping distances caused by depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Install on the front axle only for 2013-2014 Honda Fit applications. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure for torque and bedding-in. This part number, 4512-59133, is intended for a complete front brake refresh on the listed Honda Fit fitment.
Quality Assurance
DFC GeoSpec rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is built to OE-style form, fit, and function.
Original: $178.95
-65%$178.95
$62.63Description
Front Brake Kit for Honda Fit
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for 2013-2014 Honda Fit front brake service. It combines coated rotors, ceramic pads, and matched brake hardware in one front disc brake kit for a complete OE-style repair.
Key Features
- Fits 2013-2014 Honda Fit, front
- Part number 4512-59133
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with a silver-gray corrosion-resistant finish
- Dry-packaged rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Brake hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- OE-spec cast iron rotor construction and machining tolerances
Product Details
This front brake kit is engineered for Honda Fit owners who need a direct replacement service kit for the front axle. The DFC GEOSPEC coated rotors are designed to resist rust better than conventional painted or zinc-coated rotors, while the 5000 Advanced ceramic pads are formulated for stable friction performance and quieter operation. Part number 4512-59133 is a practical choice for a front brake job on the 2013-2014 Honda Fit when you want rotors, pads, and hardware matched in one package.
The DFC product line focuses on axle-specific friction and OE-style fitment across a wide range of vehicles, including family sedans, performance cars, and light trucks. For this application, the 2013-2014 Honda Fit front brake kit is assembled to support consistent stopping performance and smoother service work.
Common Brake Service Issues
- Front brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion
- Uneven braking feel from worn or out-of-spec rotors
- Longer stopping distances caused by depleted friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Install on the front axle only for 2013-2014 Honda Fit applications. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Clean all mating surfaces, inspect caliper condition, and follow the vehicle manufacturer’s brake service procedure for torque and bedding-in. This part number, 4512-59133, is intended for a complete front brake refresh on the listed Honda Fit fitment.
Quality Assurance
DFC GeoSpec rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. Each rotor is covered by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for stable friction characteristics, and the hardware kit is built to OE-style form, fit, and function.
