Dynamite Friction 4512-59115 Disc Brake Kit - Front
Front Brake Kit for Acura CL
Upgrade the front brakes on a 1998-1999 Acura CL with a complete disc brake kit built around DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware. Part number 4512-59115 is designed for drivers who want OE-style fitment, corrosion protection, and consistent stopping performance in one front axle service package.
Key Features
- Fits 1998-1999 Acura CL, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for the front brake service
- Part number 4512-59115
Product Details
This DFC brake kit combines coated front rotors, ceramic pads, and hardware for a direct service solution on the Acura CL. The rotors are machined to OE-style tolerances, processed dry, and ready to install without oil removal or extra prep. The pad compound is formulated for stable friction performance, while the rotor finish and pad design support quieter, more even braking during normal street use. Part number 4512-59115 is a practical choice for a front brake refresh on the 1998-1999 Acura CL.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line is built around consistent friction characteristics and NVH control. Together, these components create a front brake service kit suited to routine maintenance on the Acura CL.
Common Reasons to Replace
- Brake pulsation or rotor wear at the front axle
- Squealing, grinding, or uneven pad wear
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Noise or vibration during braking
Installation Notes
Verify front axle fitment before installation and inspect caliper condition, slide pins, and brake fluid level during service. Clean the hub mounting surface thoroughly so the coated rotor seats correctly. Follow proper pad bedding procedures after installation to help establish even transfer on the rotor face. Part number 4512-59115 is intended for front brake service on the Acura CL only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The rotor coating is designed to resist rust, and the pad assembly uses premium shims to support consistent operation and reduced noise.
Front Brake Kit for Acura CL
Upgrade the front brakes on a 1998-1999 Acura CL with a complete disc brake kit built around DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware. Part number 4512-59115 is designed for drivers who want OE-style fitment, corrosion protection, and consistent stopping performance in one front axle service package.
Key Features
- Fits 1998-1999 Acura CL, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for the front brake service
- Part number 4512-59115
Product Details
This DFC brake kit combines coated front rotors, ceramic pads, and hardware for a direct service solution on the Acura CL. The rotors are machined to OE-style tolerances, processed dry, and ready to install without oil removal or extra prep. The pad compound is formulated for stable friction performance, while the rotor finish and pad design support quieter, more even braking during normal street use. Part number 4512-59115 is a practical choice for a front brake refresh on the 1998-1999 Acura CL.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line is built around consistent friction characteristics and NVH control. Together, these components create a front brake service kit suited to routine maintenance on the Acura CL.
Common Reasons to Replace
- Brake pulsation or rotor wear at the front axle
- Squealing, grinding, or uneven pad wear
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Noise or vibration during braking
Installation Notes
Verify front axle fitment before installation and inspect caliper condition, slide pins, and brake fluid level during service. Clean the hub mounting surface thoroughly so the coated rotor seats correctly. Follow proper pad bedding procedures after installation to help establish even transfer on the rotor face. Part number 4512-59115 is intended for front brake service on the Acura CL only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The rotor coating is designed to resist rust, and the pad assembly uses premium shims to support consistent operation and reduced noise.
Original: $146.69
-65%$146.69
$51.34Description
Front Brake Kit for Acura CL
Upgrade the front brakes on a 1998-1999 Acura CL with a complete disc brake kit built around DFC GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware. Part number 4512-59115 is designed for drivers who want OE-style fitment, corrosion protection, and consistent stopping performance in one front axle service package.
Key Features
- Fits 1998-1999 Acura CL, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Non-directional rotor finish for smoother pad bed-in
- Hardware kit included for the front brake service
- Part number 4512-59115
Product Details
This DFC brake kit combines coated front rotors, ceramic pads, and hardware for a direct service solution on the Acura CL. The rotors are machined to OE-style tolerances, processed dry, and ready to install without oil removal or extra prep. The pad compound is formulated for stable friction performance, while the rotor finish and pad design support quieter, more even braking during normal street use. Part number 4512-59115 is a practical choice for a front brake refresh on the 1998-1999 Acura CL.
DFC’s GEOSPEC rotor line focuses on corrosion resistance and installation efficiency, while the 5000 Advanced pad line is built around consistent friction characteristics and NVH control. Together, these components create a front brake service kit suited to routine maintenance on the Acura CL.
Common Reasons to Replace
- Brake pulsation or rotor wear at the front axle
- Squealing, grinding, or uneven pad wear
- Reduced stopping performance from worn friction material
- Rust buildup on exposed rotor surfaces
- Noise or vibration during braking
Installation Notes
Verify front axle fitment before installation and inspect caliper condition, slide pins, and brake fluid level during service. Clean the hub mounting surface thoroughly so the coated rotor seats correctly. Follow proper pad bedding procedures after installation to help establish even transfer on the rotor face. Part number 4512-59115 is intended for front brake service on the Acura CL only.
Quality Assurance
DFC GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. The rotor coating is designed to resist rust, and the pad assembly uses premium shims to support consistent operation and reduced noise.
