Dynamite Friction 4512-59114 Disc Brake Kit - Rear
Rear Brake Kit for Acura CL and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for 1997 Acura CL and 1997 Honda Accord applications with Nissin rear calipers. Part number 4512-59114 combines coated rotors, ceramic brake pads, and brake hardware in one package for a complete rear brake service.
- Rear disc brake kit for 1997 Acura CL
- Rear disc brake kit for 1997 Honda Accord with Nissin rear calipers, caliper casting 9CLP-14S
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for even pad bed-in and smoother braking
DFC GEOSPEC Rotor and Pad Line
The DFC GEOSPEC rotor line is designed with an OE-style cast iron specification and a dry, ready-to-install coating that helps resist rust without requiring extra prep before installation. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. This part number, 4512-59114, is a direct rear brake service solution for Acura CL and Honda Accord owners looking for matched rotor, pad, and hardware components.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or warped rear rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances from depleted rear brake friction material
Installation Notes
Compatible With 1997 Acura CL, rear, and 1997 Honda Accord, rear, with Nissin rear calipers and caliper casting 9CLP-14S. Verify caliper casting and rear brake configuration before ordering. The rotors are shipped dry and ready to install, which reduces prep time during service. Part number 4512-59114 should be matched to the vehicle’s rear axle application only.
Quality Assurance
DFC states that its brake pads are 100% post cured and scorched for stable friction performance and reduced break-in needs. The GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. Part number 4512-59114 is built to support consistent rear brake service on the listed Acura and Honda applications.
Rear Brake Kit for Acura CL and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for 1997 Acura CL and 1997 Honda Accord applications with Nissin rear calipers. Part number 4512-59114 combines coated rotors, ceramic brake pads, and brake hardware in one package for a complete rear brake service.
- Rear disc brake kit for 1997 Acura CL
- Rear disc brake kit for 1997 Honda Accord with Nissin rear calipers, caliper casting 9CLP-14S
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for even pad bed-in and smoother braking
DFC GEOSPEC Rotor and Pad Line
The DFC GEOSPEC rotor line is designed with an OE-style cast iron specification and a dry, ready-to-install coating that helps resist rust without requiring extra prep before installation. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. This part number, 4512-59114, is a direct rear brake service solution for Acura CL and Honda Accord owners looking for matched rotor, pad, and hardware components.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or warped rear rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances from depleted rear brake friction material
Installation Notes
Compatible With 1997 Acura CL, rear, and 1997 Honda Accord, rear, with Nissin rear calipers and caliper casting 9CLP-14S. Verify caliper casting and rear brake configuration before ordering. The rotors are shipped dry and ready to install, which reduces prep time during service. Part number 4512-59114 should be matched to the vehicle’s rear axle application only.
Quality Assurance
DFC states that its brake pads are 100% post cured and scorched for stable friction performance and reduced break-in needs. The GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. Part number 4512-59114 is built to support consistent rear brake service on the listed Acura and Honda applications.
Original: $117.25
-65%$117.25
$41.04Description
Rear Brake Kit for Acura CL and Honda Accord
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for 1997 Acura CL and 1997 Honda Accord applications with Nissin rear calipers. Part number 4512-59114 combines coated rotors, ceramic brake pads, and brake hardware in one package for a complete rear brake service.
- Rear disc brake kit for 1997 Acura CL
- Rear disc brake kit for 1997 Honda Accord with Nissin rear calipers, caliper casting 9CLP-14S
- DFC GEOSPEC coated rotors with corrosion-resistant silver-gray finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
- Non-directional rotor finish for even pad bed-in and smoother braking
DFC GEOSPEC Rotor and Pad Line
The DFC GEOSPEC rotor line is designed with an OE-style cast iron specification and a dry, ready-to-install coating that helps resist rust without requiring extra prep before installation. The rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad line uses post-cured ceramic friction material and scorched surfaces to reduce initial break-in time and deliver consistent stopping performance from the first stop. This part number, 4512-59114, is a direct rear brake service solution for Acura CL and Honda Accord owners looking for matched rotor, pad, and hardware components.
Common Brake Issues This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn or warped rear rotors
- Excessive caliper movement caused by aged hardware
- Longer stopping distances from depleted rear brake friction material
Installation Notes
Compatible With 1997 Acura CL, rear, and 1997 Honda Accord, rear, with Nissin rear calipers and caliper casting 9CLP-14S. Verify caliper casting and rear brake configuration before ordering. The rotors are shipped dry and ready to install, which reduces prep time during service. Part number 4512-59114 should be matched to the vehicle’s rear axle application only.
Quality Assurance
DFC states that its brake pads are 100% post cured and scorched for stable friction performance and reduced break-in needs. The GEOSPEC rotors are manufactured to OE specifications, inspected for critical dimensions, and covered by a 12-month warranty against defects in material and workmanship. Part number 4512-59114 is built to support consistent rear brake service on the listed Acura and Honda applications.
