Dynamite Friction 4512-59104 Disc Brake Kit - Front
Front Brake Kit for Integra and Civic
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-59104, is a front disc brake kit built for OE-style service on select Acura and Honda applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Compatible with 1994-2001 Acura Integra front and 1993-1995 Honda Civic front, this kit is designed for drivers looking for a direct-fit brake service solution with corrosion protection and stable braking performance. The 4512-59104 kit is a practical choice for Acura Integra front brake replacement and Honda Civic front brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning or prep
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on service-ready brake components that match the demands of modern vehicles. The rotor coating helps protect against corrosion while the machining process supports consistent pad contact and quieter operation. The 5000 Advanced pad formulation is developed for stable friction performance, and the included hardware is engineered to restore proper caliper movement and spring tension during brake service.
This part number 4512-59104 is suited for front brake work on the Acura Integra and Honda Civic, making it a strong fit for owners searching for a front brake kit for 1994-2001 Acura Integra or 1993-1995 Honda Civic. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn front brake parts
- Vibration or harshness during braking
Installation Notes
Before installation, confirm front axle fitment for your specific Acura Integra or Honda Civic application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and mounting surfaces before assembly so the new pads and hardware can operate as intended.
For best results, follow proper brake bedding procedures after installation. A clean, even bed-in helps the pads and rotors establish consistent contact and supports quieter braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, while the hardware is built to OE-style form, fit, and function.
Front Brake Kit for Integra and Civic
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-59104, is a front disc brake kit built for OE-style service on select Acura and Honda applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Compatible with 1994-2001 Acura Integra front and 1993-1995 Honda Civic front, this kit is designed for drivers looking for a direct-fit brake service solution with corrosion protection and stable braking performance. The 4512-59104 kit is a practical choice for Acura Integra front brake replacement and Honda Civic front brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning or prep
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on service-ready brake components that match the demands of modern vehicles. The rotor coating helps protect against corrosion while the machining process supports consistent pad contact and quieter operation. The 5000 Advanced pad formulation is developed for stable friction performance, and the included hardware is engineered to restore proper caliper movement and spring tension during brake service.
This part number 4512-59104 is suited for front brake work on the Acura Integra and Honda Civic, making it a strong fit for owners searching for a front brake kit for 1994-2001 Acura Integra or 1993-1995 Honda Civic. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn front brake parts
- Vibration or harshness during braking
Installation Notes
Before installation, confirm front axle fitment for your specific Acura Integra or Honda Civic application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and mounting surfaces before assembly so the new pads and hardware can operate as intended.
For best results, follow proper brake bedding procedures after installation. A clean, even bed-in helps the pads and rotors establish consistent contact and supports quieter braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, while the hardware is built to OE-style form, fit, and function.
Original: $150.76
-65%$150.76
$52.77Description
Front Brake Kit for Integra and Civic
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-59104, is a front disc brake kit built for OE-style service on select Acura and Honda applications. It combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Compatible with 1994-2001 Acura Integra front and 1993-1995 Honda Civic front, this kit is designed for drivers looking for a direct-fit brake service solution with corrosion protection and stable braking performance. The 4512-59104 kit is a practical choice for Acura Integra front brake replacement and Honda Civic front brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- Dry-processed, dry-shipped rotors ready for installation without extra cleaning or prep
- G3000/G11H18 cast iron rotor construction engineered to OE specifications
- Non-directional rotor finish for more even pad bed-in and smoother braking
- 100% inspected rotors with balance correction on vented designs
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads to reduce initial break-in time and improve first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit designed with PTFE coating, vulcanized rubber, and stainless steel
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware line focuses on service-ready brake components that match the demands of modern vehicles. The rotor coating helps protect against corrosion while the machining process supports consistent pad contact and quieter operation. The 5000 Advanced pad formulation is developed for stable friction performance, and the included hardware is engineered to restore proper caliper movement and spring tension during brake service.
This part number 4512-59104 is suited for front brake work on the Acura Integra and Honda Civic, making it a strong fit for owners searching for a front brake kit for 1994-2001 Acura Integra or 1993-1995 Honda Civic. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware components
- Rust buildup on exposed rotor surfaces
- Longer stopping distances from worn front brake parts
- Vibration or harshness during braking
Installation Notes
Before installation, confirm front axle fitment for your specific Acura Integra or Honda Civic application. The rotors are shipped dry and ready to install, which helps reduce prep time during service. Inspect calipers, slides, and mounting surfaces before assembly so the new pads and hardware can operate as intended.
For best results, follow proper brake bedding procedures after installation. A clean, even bed-in helps the pads and rotors establish consistent contact and supports quieter braking performance.
Quality Assurance
Each DFC GEOSPEC rotor is machined to tight tolerances, checked for critical dimensions, and inspected for balance where applicable. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction characteristics, while the hardware is built to OE-style form, fit, and function.
