Dynamite Friction 4512-58027 Disc Brake Kit - Rear
Rear Brake Kit for Acura NSX
DFC Friction part number 4512-58027 is a rear disc brake kit for the 1997-2005 Acura NSX. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 1997-2005 Acura NSX, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is built for rear brake service on the Acura NSX and is engineered around OE-style form, fit, and function. The coated rotors help resist rust, the ceramic pads are prepared for consistent friction from the first stop, and the included hardware addresses worn or corroded brake clips and related components that can affect pedal feel and noise. Part number 4512-58027 is a practical choice for drivers looking to restore rear braking performance on the Acura NSX without piecing together separate components.
DFC’s GeoSpec rotor line is processed and inspected to tight tolerances, then finished with a non-directional surface to support quieter operation and more even pad contact. The 5000 Advanced pad line is formulated for modern vehicle braking demands and uses shims to improve NVH control. For Acura NSX rear brake service, this combination supports a cleaner installation and a more complete brake repair.
Common Problems This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by worn rotor and pad surfaces
- Reduced spring tension or caliper movement from aged hardware
- Premature or uneven pad wear
Installation Notes
Compatible With 1997-2005 Acura NSX rear brake service. Before installation, inspect calipers, slides, and brake fluid condition, and clean all mating surfaces thoroughly. The rotors are shipped dry and ready to install, so no oil removal or additional rotor preparation is required. Follow factory torque specifications and perform a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4512-58027 is built to meet OE specifications for rear brake service on the Acura NSX.
Rear Brake Kit for Acura NSX
DFC Friction part number 4512-58027 is a rear disc brake kit for the 1997-2005 Acura NSX. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 1997-2005 Acura NSX, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is built for rear brake service on the Acura NSX and is engineered around OE-style form, fit, and function. The coated rotors help resist rust, the ceramic pads are prepared for consistent friction from the first stop, and the included hardware addresses worn or corroded brake clips and related components that can affect pedal feel and noise. Part number 4512-58027 is a practical choice for drivers looking to restore rear braking performance on the Acura NSX without piecing together separate components.
DFC’s GeoSpec rotor line is processed and inspected to tight tolerances, then finished with a non-directional surface to support quieter operation and more even pad contact. The 5000 Advanced pad line is formulated for modern vehicle braking demands and uses shims to improve NVH control. For Acura NSX rear brake service, this combination supports a cleaner installation and a more complete brake repair.
Common Problems This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by worn rotor and pad surfaces
- Reduced spring tension or caliper movement from aged hardware
- Premature or uneven pad wear
Installation Notes
Compatible With 1997-2005 Acura NSX rear brake service. Before installation, inspect calipers, slides, and brake fluid condition, and clean all mating surfaces thoroughly. The rotors are shipped dry and ready to install, so no oil removal or additional rotor preparation is required. Follow factory torque specifications and perform a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4512-58027 is built to meet OE specifications for rear brake service on the Acura NSX.
Original: $177.06
-65%$177.06
$61.97Description
Rear Brake Kit for Acura NSX
DFC Friction part number 4512-58027 is a rear disc brake kit for the 1997-2005 Acura NSX. It combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching brake hardware in one service package for a complete rear brake refresh.
Key Features
- Fits 1997-2005 Acura NSX, rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install
- G3000/G11H18 cast iron rotor construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
This DFC brake service kit is built for rear brake service on the Acura NSX and is engineered around OE-style form, fit, and function. The coated rotors help resist rust, the ceramic pads are prepared for consistent friction from the first stop, and the included hardware addresses worn or corroded brake clips and related components that can affect pedal feel and noise. Part number 4512-58027 is a practical choice for drivers looking to restore rear braking performance on the Acura NSX without piecing together separate components.
DFC’s GeoSpec rotor line is processed and inspected to tight tolerances, then finished with a non-directional surface to support quieter operation and more even pad contact. The 5000 Advanced pad line is formulated for modern vehicle braking demands and uses shims to improve NVH control. For Acura NSX rear brake service, this combination supports a cleaner installation and a more complete brake repair.
Common Problems This Kit Can Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel caused by worn rotor and pad surfaces
- Reduced spring tension or caliper movement from aged hardware
- Premature or uneven pad wear
Installation Notes
Compatible With 1997-2005 Acura NSX rear brake service. Before installation, inspect calipers, slides, and brake fluid condition, and clean all mating surfaces thoroughly. The rotors are shipped dry and ready to install, so no oil removal or additional rotor preparation is required. Follow factory torque specifications and perform a proper pad bed-in procedure after installation.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and DFC backs the rotors with a 12-month warranty against defects in material and workmanship. Part number 4512-58027 is built to meet OE specifications for rear brake service on the Acura NSX.
