Dynamite Friction 4512-58016 Disc Brake Kit - Front
Front Brake Kit for 1991-1996 Acura NSX
Built for the front axle of the 1991-1996 Acura NSX, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete service solution. Part number 4512-58016 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response on the Acura NSX front brake service.
Key Features
- Compatible with 1991-1996 Acura NSX, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotors are machined to tight tolerances and finished with a non-directional surface
- Part number 4512-58016
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Acura NSX. The rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the cast iron construction follows OEM-style durability and stability targets. The non-directional finish supports even pad bed-in and smoother braking feel.
The 5000 Advanced ceramic pads are formulated for stable friction performance and are post cured for consistency. DFC also scorches each pad to remove uncured bonding agents, helping reduce the initial break-in period. The included hardware is built to restore proper spring tension and caliper movement, which is important on a performance platform like the Acura NSX. Part number 4512-58016 is a direct front brake service kit for this application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
Installation Notes and Tips
Before installation, inspect calipers, slide pins, and brake hoses for wear or sticking. Clean the hub mounting surface thoroughly so the new rotors seat flat and true. Because the rotors are shipped dry and ready to install, no oil removal is required. Follow proper torque procedures and perform a controlled bed-in process after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-58016 is built to OE-style specifications for the 1991-1996 Acura NSX front brake application.
Front Brake Kit for 1991-1996 Acura NSX
Built for the front axle of the 1991-1996 Acura NSX, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete service solution. Part number 4512-58016 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response on the Acura NSX front brake service.
Key Features
- Compatible with 1991-1996 Acura NSX, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotors are machined to tight tolerances and finished with a non-directional surface
- Part number 4512-58016
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Acura NSX. The rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the cast iron construction follows OEM-style durability and stability targets. The non-directional finish supports even pad bed-in and smoother braking feel.
The 5000 Advanced ceramic pads are formulated for stable friction performance and are post cured for consistency. DFC also scorches each pad to remove uncured bonding agents, helping reduce the initial break-in period. The included hardware is built to restore proper spring tension and caliper movement, which is important on a performance platform like the Acura NSX. Part number 4512-58016 is a direct front brake service kit for this application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
Installation Notes and Tips
Before installation, inspect calipers, slide pins, and brake hoses for wear or sticking. Clean the hub mounting surface thoroughly so the new rotors seat flat and true. Because the rotors are shipped dry and ready to install, no oil removal is required. Follow proper torque procedures and perform a controlled bed-in process after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-58016 is built to OE-style specifications for the 1991-1996 Acura NSX front brake application.
Original: $216.44
-65%$216.44
$75.75Description
Front Brake Kit for 1991-1996 Acura NSX
Built for the front axle of the 1991-1996 Acura NSX, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic brake pads, and matching hardware for a complete service solution. Part number 4512-58016 is designed for drivers looking for OE-style fitment, corrosion protection, and consistent pedal response on the Acura NSX front brake service.
Key Features
- Compatible with 1991-1996 Acura NSX, front
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Rotors are machined to tight tolerances and finished with a non-directional surface
- Part number 4512-58016
Product Details
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware package is engineered for front brake service on the Acura NSX. The rotors are processed dry and ready to install, which helps reduce prep time during brake replacement. Their coated surface is designed to resist rust better than conventional paint or zinc finishes, while the cast iron construction follows OEM-style durability and stability targets. The non-directional finish supports even pad bed-in and smoother braking feel.
The 5000 Advanced ceramic pads are formulated for stable friction performance and are post cured for consistency. DFC also scorches each pad to remove uncured bonding agents, helping reduce the initial break-in period. The included hardware is built to restore proper spring tension and caliper movement, which is important on a performance platform like the Acura NSX. Part number 4512-58016 is a direct front brake service kit for this application.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Reduced stopping consistency from worn front rotors
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
Installation Notes and Tips
Before installation, inspect calipers, slide pins, and brake hoses for wear or sticking. Clean the hub mounting surface thoroughly so the new rotors seat flat and true. Because the rotors are shipped dry and ready to install, no oil removal is required. Follow proper torque procedures and perform a controlled bed-in process after installation to help the pads and rotors establish even contact.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, with vented rotors corrected as needed during the mill-balance process. The rotors carry a 12-month warranty against defects in material and workmanship. Part number 4512-58016 is built to OE-style specifications for the 1991-1996 Acura NSX front brake application.
