Dynamite Friction 4512-55011 Disc Brake Kit - Rear
Rear Brake Kit for Ford Edge and Lincoln Nautilus
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Ford and Lincoln applications. Part number 4512-55011 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh.
Compatible With rear brake service on 2015-2020 Ford Edge, 2016-2018 Lincoln MKX, 2017-2019 Ford Fusion, 2017-2020 Lincoln Continental, 2017-2020 Lincoln MKZ, and select 2019-2024 Lincoln Nautilus and 2021-2024 Ford Edge rear solid-disc applications.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-55011 for rear brake service applications
Product Details
DFC designs this brake service kit to match OE-style requirements for durability, stability, and consistent braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor casting uses G3000/G11H18 cast iron specification, and each rotor is machined to tight tolerances with balance inspection on vented units. The included ceramic pads are formulated for stable friction output, while the hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and brake noise. This part number 4512-55011 is a practical rear brake solution for Ford Edge, Lincoln Nautilus, and related Lincoln/Ford rear disc applications.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven rear pad wear caused by aged hardware
- Reduced braking smoothness from worn rotor finish
- Longer stopping distances from worn rear brake components
Installation Notes and Tips
Verify rear solid-disc configuration before ordering, since fitment varies by model year and trim. Clean the rotor surface only as needed before installation; the coated finish is designed to be installed dry. Follow proper brake service procedures, torque specifications, and pad bed-in steps after installation. For fitment-specific rear applications, confirm the vehicle year, make, model, and brake configuration against the listing before beginning service.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors receive balance correction when required. The rotors include a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and inspected hardware components to support consistent fit and finish across the kit.
Rear Brake Kit for Ford Edge and Lincoln Nautilus
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Ford and Lincoln applications. Part number 4512-55011 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh.
Compatible With rear brake service on 2015-2020 Ford Edge, 2016-2018 Lincoln MKX, 2017-2019 Ford Fusion, 2017-2020 Lincoln Continental, 2017-2020 Lincoln MKZ, and select 2019-2024 Lincoln Nautilus and 2021-2024 Ford Edge rear solid-disc applications.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-55011 for rear brake service applications
Product Details
DFC designs this brake service kit to match OE-style requirements for durability, stability, and consistent braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor casting uses G3000/G11H18 cast iron specification, and each rotor is machined to tight tolerances with balance inspection on vented units. The included ceramic pads are formulated for stable friction output, while the hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and brake noise. This part number 4512-55011 is a practical rear brake solution for Ford Edge, Lincoln Nautilus, and related Lincoln/Ford rear disc applications.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven rear pad wear caused by aged hardware
- Reduced braking smoothness from worn rotor finish
- Longer stopping distances from worn rear brake components
Installation Notes and Tips
Verify rear solid-disc configuration before ordering, since fitment varies by model year and trim. Clean the rotor surface only as needed before installation; the coated finish is designed to be installed dry. Follow proper brake service procedures, torque specifications, and pad bed-in steps after installation. For fitment-specific rear applications, confirm the vehicle year, make, model, and brake configuration against the listing before beginning service.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors receive balance correction when required. The rotors include a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and inspected hardware components to support consistent fit and finish across the kit.
Original: $171.00
-65%$171.00
$59.85Description
Rear Brake Kit for Ford Edge and Lincoln Nautilus
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Ford and Lincoln applications. Part number 4512-55011 combines coated rotors, ceramic pads, and matching hardware for a complete rear brake refresh.
Compatible With rear brake service on 2015-2020 Ford Edge, 2016-2018 Lincoln MKX, 2017-2019 Ford Fusion, 2017-2020 Lincoln Continental, 2017-2020 Lincoln MKZ, and select 2019-2024 Lincoln Nautilus and 2021-2024 Ford Edge rear solid-disc applications.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time and more immediate stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-55011 for rear brake service applications
Product Details
DFC designs this brake service kit to match OE-style requirements for durability, stability, and consistent braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a rear brake job. The rotor casting uses G3000/G11H18 cast iron specification, and each rotor is machined to tight tolerances with balance inspection on vented units. The included ceramic pads are formulated for stable friction output, while the hardware kit addresses worn or corroded brake hardware that can contribute to uneven wear and brake noise. This part number 4512-55011 is a practical rear brake solution for Ford Edge, Lincoln Nautilus, and related Lincoln/Ford rear disc applications.
Common Problems This Kit Addresses
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven rear pad wear caused by aged hardware
- Reduced braking smoothness from worn rotor finish
- Longer stopping distances from worn rear brake components
Installation Notes and Tips
Verify rear solid-disc configuration before ordering, since fitment varies by model year and trim. Clean the rotor surface only as needed before installation; the coated finish is designed to be installed dry. Follow proper brake service procedures, torque specifications, and pad bed-in steps after installation. For fitment-specific rear applications, confirm the vehicle year, make, model, and brake configuration against the listing before beginning service.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors receive balance correction when required. The rotors include a 12-month warranty against defects in material and workmanship. DFC also uses post-cured pads and inspected hardware components to support consistent fit and finish across the kit.
