Dynamite Friction 4512-48153 Disc Brake Kit - Front
Front Brake Kit for GM SUVs and Crossovers
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Buick, Chevrolet, and GMC applications. Part number 4512-48153 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction machined to OE specifications
Product Details
DFC’s GEOSPEC rotor line is processed dry and ready to install, helping reduce prep time during brake service. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the machined rotor face and balance checks support stable braking performance. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise. Part number 4512-48153 is a practical front brake solution for drivers servicing a 2018-2020 Buick Enclave, 2019-2020 Chevrolet Blazer, 2018-2020 Chevrolet Traverse, 2017-2020 GMC Acadia, or 2017 GMC Acadia Limited.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noisy front brakes
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by fatigued brake hardware
Installation Notes
Compatible With front brake service on the listed vehicles only. Verify rotor size, caliper configuration, and vehicle trim before installation. The rotors are shipped dry and ready to install, so no oil removal is required before service. For proper results, clean the hub mounting surface, inspect caliper slides, and follow standard brake bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Front Brake Kit for GM SUVs and Crossovers
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Buick, Chevrolet, and GMC applications. Part number 4512-48153 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction machined to OE specifications
Product Details
DFC’s GEOSPEC rotor line is processed dry and ready to install, helping reduce prep time during brake service. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the machined rotor face and balance checks support stable braking performance. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise. Part number 4512-48153 is a practical front brake solution for drivers servicing a 2018-2020 Buick Enclave, 2019-2020 Chevrolet Blazer, 2018-2020 Chevrolet Traverse, 2017-2020 GMC Acadia, or 2017 GMC Acadia Limited.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noisy front brakes
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by fatigued brake hardware
Installation Notes
Compatible With front brake service on the listed vehicles only. Verify rotor size, caliper configuration, and vehicle trim before installation. The rotors are shipped dry and ready to install, so no oil removal is required before service. For proper results, clean the hub mounting surface, inspect caliper slides, and follow standard brake bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Original: $243.04
-65%$243.04
$85.06Description
Front Brake Kit for GM SUVs and Crossovers
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Buick, Chevrolet, and GMC applications. Part number 4512-48153 combines coated rotors, ceramic brake pads, and matching hardware for a complete front brake refresh.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced break-in time and initial stopping response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter braking
- G3000/G11H18 cast iron rotor construction machined to OE specifications
Product Details
DFC’s GEOSPEC rotor line is processed dry and ready to install, helping reduce prep time during brake service. The coated surface is designed to resist rust better than conventional paint or zinc finishes, while the machined rotor face and balance checks support stable braking performance. The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with shims that help reduce brake noise. Part number 4512-48153 is a practical front brake solution for drivers servicing a 2018-2020 Buick Enclave, 2019-2020 Chevrolet Blazer, 2018-2020 Chevrolet Traverse, 2017-2020 GMC Acadia, or 2017 GMC Acadia Limited.
What This Brake Kit Helps Address
- Brake pulsation from worn or uneven front rotors
- Squealing or noisy front brakes
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by fatigued brake hardware
Installation Notes
Compatible With front brake service on the listed vehicles only. Verify rotor size, caliper configuration, and vehicle trim before installation. The rotors are shipped dry and ready to install, so no oil removal is required before service. For proper results, clean the hub mounting surface, inspect caliper slides, and follow standard brake bedding procedures after installation.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and balance, and the rotors carry a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style fit and function. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
