Dynamite Friction 4512-47093 Disc Brake Kit - Rear
Rear Brake Kit for Corvette
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Chevrolet Corvette applications. Part number 4512-47093 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Compatible With 2014-2019 Chevrolet Corvette rear applications, this kit is designed for drivers who want OE-style fitment, stable braking response, and corrosion-resistant rotor protection. It is a practical choice for a Chevrolet Corvette rear brake kit search, especially for 2015-2019 Corvette rear brake rotors and pads.
Key Features
- Part number 4512-47093 for rear brake service
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s 5000 Advanced pad formulation is developed around modern vehicle braking requirements and uses post-curing to help maintain consistent friction performance. The pads are scorched to remove uncured bonding agents, which helps reduce the need for extended break-in and supports stronger initial stopping response. On the rotor side, the GeoSpec coating is engineered to fight rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction is machined to tight tolerances and inspected for balance and OE-level dimensional control. The included hardware is designed to replace worn, fatigued, or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-47093 is a focused rear brake solution for Chevrolet Corvette owners looking for a complete service kit.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Brake vibration caused by worn or out-of-spec rear parts
Installation Notes
Fits 2014 Chevrolet Corvette, rear without Z51 Package. Fits 2015-2019 Chevrolet Corvette, rear. Verify rotor size, brake package, and rear axle configuration before ordering. Clean installation surfaces, follow the vehicle service manual, and complete a proper pad bed-in procedure after installation. This kit is commonly searched as a Chevrolet Corvette rear brake kit and as rear brake rotors and pads for Corvette applications.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses corrosion-resistant materials selected for OE-style form, fit, and function.
Rear Brake Kit for Corvette
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Chevrolet Corvette applications. Part number 4512-47093 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Compatible With 2014-2019 Chevrolet Corvette rear applications, this kit is designed for drivers who want OE-style fitment, stable braking response, and corrosion-resistant rotor protection. It is a practical choice for a Chevrolet Corvette rear brake kit search, especially for 2015-2019 Corvette rear brake rotors and pads.
Key Features
- Part number 4512-47093 for rear brake service
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s 5000 Advanced pad formulation is developed around modern vehicle braking requirements and uses post-curing to help maintain consistent friction performance. The pads are scorched to remove uncured bonding agents, which helps reduce the need for extended break-in and supports stronger initial stopping response. On the rotor side, the GeoSpec coating is engineered to fight rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction is machined to tight tolerances and inspected for balance and OE-level dimensional control. The included hardware is designed to replace worn, fatigued, or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-47093 is a focused rear brake solution for Chevrolet Corvette owners looking for a complete service kit.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Brake vibration caused by worn or out-of-spec rear parts
Installation Notes
Fits 2014 Chevrolet Corvette, rear without Z51 Package. Fits 2015-2019 Chevrolet Corvette, rear. Verify rotor size, brake package, and rear axle configuration before ordering. Clean installation surfaces, follow the vehicle service manual, and complete a proper pad bed-in procedure after installation. This kit is commonly searched as a Chevrolet Corvette rear brake kit and as rear brake rotors and pads for Corvette applications.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses corrosion-resistant materials selected for OE-style form, fit, and function.
Description
Rear Brake Kit for Corvette
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select Chevrolet Corvette applications. Part number 4512-47093 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Compatible With 2014-2019 Chevrolet Corvette rear applications, this kit is designed for drivers who want OE-style fitment, stable braking response, and corrosion-resistant rotor protection. It is a practical choice for a Chevrolet Corvette rear brake kit search, especially for 2015-2019 Corvette rear brake rotors and pads.
Key Features
- Part number 4512-47093 for rear brake service
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise and vibration control
- GeoSpec coated rotors with a silver-gray finish that resists rust
- Dry-processed, dry-shipped rotors ready for installation
- Non-directional rotor finish for more even pad bed-in and smoother stops
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC’s 5000 Advanced pad formulation is developed around modern vehicle braking requirements and uses post-curing to help maintain consistent friction performance. The pads are scorched to remove uncured bonding agents, which helps reduce the need for extended break-in and supports stronger initial stopping response. On the rotor side, the GeoSpec coating is engineered to fight rust better than conventional paint or zinc finishes, while the G3000/G11H18 cast iron construction is machined to tight tolerances and inspected for balance and OE-level dimensional control. The included hardware is designed to replace worn, fatigued, or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-47093 is a focused rear brake solution for Chevrolet Corvette owners looking for a complete service kit.
What This Kit Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Uneven or premature pad wear
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Brake vibration caused by worn or out-of-spec rear parts
Installation Notes
Fits 2014 Chevrolet Corvette, rear without Z51 Package. Fits 2015-2019 Chevrolet Corvette, rear. Verify rotor size, brake package, and rear axle configuration before ordering. Clean installation surfaces, follow the vehicle service manual, and complete a proper pad bed-in procedure after installation. This kit is commonly searched as a Chevrolet Corvette rear brake kit and as rear brake rotors and pads for Corvette applications.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, while the hardware kit uses corrosion-resistant materials selected for OE-style form, fit, and function.
