Dynamite Friction 4512-47072 Disc Brake Kit - Front
Front Brake Kit for GM N-Body Applications
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware is a front disc brake kit built for select Chevrolet, Pontiac, and Oldsmobile vehicles. This kit combines coated rotors, ceramic brake pads, and brake hardware for a complete front brake service on the listed applications, including the Chevrolet Malibu, Pontiac Grand Am, and Oldsmobile Alero.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- OE-style rotor metallurgy and machining tolerances
- Part number 4512-47072
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, helping reduce prep time during a front brake job. The coated surface is engineered to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and use shims that help reduce brake noise and vibration. Part number 4512-47072 is a practical choice for drivers servicing front brakes on compatible GM passenger cars.
Compatible With front brake service on 2004-2005 Chevrolet Classic, 2004-2005 Chevrolet Malibu, 1999-2005 Pontiac Grand Am, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. Part number 4512-47072 is also a fitment-based search match for front brake kit replacement on these vehicles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face or hat area
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Vibration or pulsation during front brake application
Installation Notes
Use this kit for the front axle only on the listed applications. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. Follow proper bedding procedures after installation so the pads and rotors can establish an even transfer layer. Verify vehicle-specific fitment by year, make, model, and position before ordering.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors are backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for consistent friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Front Brake Kit for GM N-Body Applications
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware is a front disc brake kit built for select Chevrolet, Pontiac, and Oldsmobile vehicles. This kit combines coated rotors, ceramic brake pads, and brake hardware for a complete front brake service on the listed applications, including the Chevrolet Malibu, Pontiac Grand Am, and Oldsmobile Alero.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- OE-style rotor metallurgy and machining tolerances
- Part number 4512-47072
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, helping reduce prep time during a front brake job. The coated surface is engineered to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and use shims that help reduce brake noise and vibration. Part number 4512-47072 is a practical choice for drivers servicing front brakes on compatible GM passenger cars.
Compatible With front brake service on 2004-2005 Chevrolet Classic, 2004-2005 Chevrolet Malibu, 1999-2005 Pontiac Grand Am, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. Part number 4512-47072 is also a fitment-based search match for front brake kit replacement on these vehicles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face or hat area
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Vibration or pulsation during front brake application
Installation Notes
Use this kit for the front axle only on the listed applications. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. Follow proper bedding procedures after installation so the pads and rotors can establish an even transfer layer. Verify vehicle-specific fitment by year, make, model, and position before ordering.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors are backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for consistent friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Description
Front Brake Kit for GM N-Body Applications
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware is a front disc brake kit built for select Chevrolet, Pontiac, and Oldsmobile vehicles. This kit combines coated rotors, ceramic brake pads, and brake hardware for a complete front brake service on the listed applications, including the Chevrolet Malibu, Pontiac Grand Am, and Oldsmobile Alero.
Key Features
- Front disc brake kit with rotors, pads, and hardware
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for smoother pad bed-in and quieter stops
- OE-style rotor metallurgy and machining tolerances
- Part number 4512-47072
Product Details
The DFC GEOSPEC rotor design is processed dry and ready to install, helping reduce prep time during a front brake job. The coated surface is engineered to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for stable friction performance and use shims that help reduce brake noise and vibration. Part number 4512-47072 is a practical choice for drivers servicing front brakes on compatible GM passenger cars.
Compatible With front brake service on 2004-2005 Chevrolet Classic, 2004-2005 Chevrolet Malibu, 1999-2005 Pontiac Grand Am, 1999-2004 Oldsmobile Alero, 1997-2003 Chevrolet Malibu, and 1997-1999 Oldsmobile Cutlass. Part number 4512-47072 is also a fitment-based search match for front brake kit replacement on these vehicles.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust and surface corrosion on the braking face or hat area
- Uneven braking feel caused by worn or out-of-spec rotors
- Reduced stopping performance from aged friction material
- Vibration or pulsation during front brake application
Installation Notes
Use this kit for the front axle only on the listed applications. Inspect calipers, slides, and brake hoses before installation, and clean the hub mounting surface to help prevent rotor runout. Follow proper bedding procedures after installation so the pads and rotors can establish an even transfer layer. Verify vehicle-specific fitment by year, make, model, and position before ordering.
Quality Assurance
DFC states that each rotor is 100% inspected for critical dimensions and balance, and the rotors are backed by a 12-month warranty against defects in material and workmanship. The pads are post-cured and scorched for consistent friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
