Dynamite Friction 4512-47062 Disc Brake Kit - Front or Rear
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for classic Chevrolet applications that need dependable stopping performance and corrosion resistance. Part number 4512-47062 combines coated rotors, ceramic pads, and brake hardware in one service kit for rear applications on select Corvette and Camaro models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are designed to bring together the rotor, pad, and hardware components needed for a complete brake service. The GEOSPEC rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction across a range of vehicle applications, including Chevrolet Corvette and Chevrolet Camaro brake service needs. Part number 4512-47062 is a practical choice for drivers restoring rear braking performance on 1963-1982 Corvette and 1968-1969 Camaro models.
Fitment
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, rear. For vehicles equipped with 4 wheel disc brakes.
- Fits 1968-1969 Chevrolet Camaro, front. For vehicles equipped with 4 wheel disc brakes.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced stopping consistency from aged friction material
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Longer brake service time caused by rotors that require cleaning before installation
Installation Notes
Before installation, confirm axle position and vehicle brake configuration, especially on 1968-1969 Chevrolet Camaro models equipped with 4 wheel disc brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For proper results, follow standard brake bedding procedures after installation and inspect calipers, hoses, and related components during the brake job.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for classic Chevrolet applications that need dependable stopping performance and corrosion resistance. Part number 4512-47062 combines coated rotors, ceramic pads, and brake hardware in one service kit for rear applications on select Corvette and Camaro models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are designed to bring together the rotor, pad, and hardware components needed for a complete brake service. The GEOSPEC rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction across a range of vehicle applications, including Chevrolet Corvette and Chevrolet Camaro brake service needs. Part number 4512-47062 is a practical choice for drivers restoring rear braking performance on 1963-1982 Corvette and 1968-1969 Camaro models.
Fitment
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, rear. For vehicles equipped with 4 wheel disc brakes.
- Fits 1968-1969 Chevrolet Camaro, front. For vehicles equipped with 4 wheel disc brakes.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced stopping consistency from aged friction material
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Longer brake service time caused by rotors that require cleaning before installation
Installation Notes
Before installation, confirm axle position and vehicle brake configuration, especially on 1968-1969 Chevrolet Camaro models equipped with 4 wheel disc brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For proper results, follow standard brake bedding procedures after installation and inspect calipers, hoses, and related components during the brake job.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
Description
Brake Kit for Corvette and Camaro
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for classic Chevrolet applications that need dependable stopping performance and corrosion resistance. Part number 4512-47062 combines coated rotors, ceramic pads, and brake hardware in one service kit for rear applications on select Corvette and Camaro models.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray finish that resists rust better than conventional paint or zinc coatings
- 5000 Advanced ceramic brake pads with post-cured friction material for stable performance
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed rotors that are ready to install without oil removal
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC brake kits are designed to bring together the rotor, pad, and hardware components needed for a complete brake service. The GEOSPEC rotors are cast to OEM-style G3000/G11H18 specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are formulated for consistent friction across a range of vehicle applications, including Chevrolet Corvette and Chevrolet Camaro brake service needs. Part number 4512-47062 is a practical choice for drivers restoring rear braking performance on 1963-1982 Corvette and 1968-1969 Camaro models.
Fitment
- Fits 1967-1982 Chevrolet Corvette, rear
- Fits 1963-1966 Chevrolet Corvette, rear
- Fits 1968-1969 Chevrolet Camaro, rear. For vehicles equipped with 4 wheel disc brakes.
- Fits 1968-1969 Chevrolet Camaro, front. For vehicles equipped with 4 wheel disc brakes.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake hardware
- Reduced stopping consistency from aged friction material
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Longer brake service time caused by rotors that require cleaning before installation
Installation Notes
Before installation, confirm axle position and vehicle brake configuration, especially on 1968-1969 Chevrolet Camaro models equipped with 4 wheel disc brakes. The rotors are shipped dry and ready to install, which helps reduce prep time during service. For proper results, follow standard brake bedding procedures after installation and inspect calipers, hoses, and related components during the brake job.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is verified against OE specifications. The rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, and the hardware kit is built to OE-style form, fit, and function.
