Dynamite Friction 4512-47060 Disc Brake Kit - Front
Front Brake Kit for Classic GM Muscle Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 1967-1968 Buick Skylark, Chevrolet Camaro, Chevrolet Malibu, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, and Pontiac Tempest applications. Part number 4512-47060 combines coated rotors, ceramic pads, and matching brake hardware in one front brake package.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC coated rotors are built to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The non-directional finish supports consistent pad contact, while the coating helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced ceramic pads are post cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. Part number 4512-47060 is a practical choice for drivers restoring front braking performance on a 1967-1968 Buick Skylark, 1968 Chevrolet Camaro, or 1967 Chevrolet Malibu.
Vehicle Fitment
- Fits 1967-1968 Buick Skylark, front
- Fits 1968 Chevrolet Camaro, front
- Fits 1967-1968 Oldsmobile Cutlass, front
- Fits 1967-1968 Oldsmobile Cutlass Supreme, front
- Fits 1967-1968 Pontiac Tempest, front
- Fits 1967 Chevrolet Malibu, front
Common Brake Issues This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened clips and springs
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Brake pulsation or inconsistent stopping feel from worn front rotors
- Longer stopping distances due to aged friction components
Installation Notes
Inspect calipers, hoses, and wheel bearings before installation to confirm the rest of the front brake system is in serviceable condition. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow proper pad bedding procedures after installation. Part number 4512-47060 is designed for front axle service on the listed Buick, Chevrolet, Oldsmobile, and Pontiac applications.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
Front Brake Kit for Classic GM Muscle Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 1967-1968 Buick Skylark, Chevrolet Camaro, Chevrolet Malibu, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, and Pontiac Tempest applications. Part number 4512-47060 combines coated rotors, ceramic pads, and matching brake hardware in one front brake package.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC coated rotors are built to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The non-directional finish supports consistent pad contact, while the coating helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced ceramic pads are post cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. Part number 4512-47060 is a practical choice for drivers restoring front braking performance on a 1967-1968 Buick Skylark, 1968 Chevrolet Camaro, or 1967 Chevrolet Malibu.
Vehicle Fitment
- Fits 1967-1968 Buick Skylark, front
- Fits 1968 Chevrolet Camaro, front
- Fits 1967-1968 Oldsmobile Cutlass, front
- Fits 1967-1968 Oldsmobile Cutlass Supreme, front
- Fits 1967-1968 Pontiac Tempest, front
- Fits 1967 Chevrolet Malibu, front
Common Brake Issues This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened clips and springs
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Brake pulsation or inconsistent stopping feel from worn front rotors
- Longer stopping distances due to aged friction components
Installation Notes
Inspect calipers, hoses, and wheel bearings before installation to confirm the rest of the front brake system is in serviceable condition. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow proper pad bedding procedures after installation. Part number 4512-47060 is designed for front axle service on the listed Buick, Chevrolet, Oldsmobile, and Pontiac applications.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
Description
Front Brake Kit for Classic GM Muscle Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select 1967-1968 Buick Skylark, Chevrolet Camaro, Chevrolet Malibu, Oldsmobile Cutlass, Oldsmobile Cutlass Supreme, and Pontiac Tempest applications. Part number 4512-47060 combines coated rotors, ceramic pads, and matching brake hardware in one front brake package.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready for installation without oil removal
- Non-directional rotor finish for even pad bed-in and smoother braking
- 5000 Advanced ceramic pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC GEOSPEC coated rotors are built to OE-style G3000/G11H18 cast iron specifications and machined to tight tolerances for durability and stability. The non-directional finish supports consistent pad contact, while the coating helps resist rust better than conventional paint or zinc finishes. The 5000 Advanced ceramic pads are post cured and scorched to reduce initial break-in time and deliver stable friction from the first stop. Part number 4512-47060 is a practical choice for drivers restoring front braking performance on a 1967-1968 Buick Skylark, 1968 Chevrolet Camaro, or 1967 Chevrolet Malibu.
Vehicle Fitment
- Fits 1967-1968 Buick Skylark, front
- Fits 1968 Chevrolet Camaro, front
- Fits 1967-1968 Oldsmobile Cutlass, front
- Fits 1967-1968 Oldsmobile Cutlass Supreme, front
- Fits 1967-1968 Pontiac Tempest, front
- Fits 1967 Chevrolet Malibu, front
Common Brake Issues This Kit Can Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened clips and springs
- Rotor rust and surface deterioration on stored or driven classic vehicles
- Brake pulsation or inconsistent stopping feel from worn front rotors
- Longer stopping distances due to aged friction components
Installation Notes
Inspect calipers, hoses, and wheel bearings before installation to confirm the rest of the front brake system is in serviceable condition. Clean the hub mounting surface thoroughly so the coated rotors seat flat, and follow proper pad bedding procedures after installation. Part number 4512-47060 is designed for front axle service on the listed Buick, Chevrolet, Oldsmobile, and Pontiac applications.
Quality Assurance
Each DFC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post cured for stable friction performance, and the hardware kit is engineered to OE form, fit, and function.
