Dynamite Friction 4512-45038 Disc Brake Kit - Front
Front Brake Kit for GM Full-Size Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac applications. Part number 4512-45038 combines coated rotors, ceramic pads, and brake hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-coated rotors with a silver-gray finish for improved rust resistance
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 100% post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC rotors are made to G3000/G11H18 cast iron specifications and are processed dry, so they are ready to install without oil removal or extra prep. The coated surface is designed to resist corrosion, while the non-directional finish supports even pad contact and quieter braking. The 5000 Advanced ceramic pads are post-cured and scorched to help deliver consistent friction from the first stop. This part number, 4512-45038, is a practical choice for drivers servicing front brakes on vehicles such as the Buick LeSabre, Cadillac DeVille, Chevrolet Impala, and Pontiac Bonneville.
Vehicle Fitment
- Fits 1997-2005 Buick Park Avenue, front
- Fits 2000-2004 Buick LeSabre, front, 16 inch wheels
- Fits 1997-1999 Buick Riviera, front
- Fits 1997-2004 Cadillac DeVille, front
- Fits 2005 Cadillac DeVille, front, excluding Heavy Duty; to VIN 5U12-9028
- Fits 1997-2002 Cadillac Eldorado, front
- Fits 1997 Cadillac Seville, front
- Fits 2000-2004 Chevrolet Impala, front
- Fits 2005 Chevrolet Impala, front, to chassis/VIN 59143075
- Fits 2000-2004 Chevrolet Monte Carlo, front
- Fits 2005 Chevrolet Monte Carlo, front, to VIN 5914-8923
- Fits 2000-2004 Pontiac Bonneville, front
- Fits 1997-1999 Oldsmobile Aurora, front
- Fits 2001-2003 Oldsmobile Aurora, front
- Fits 1998-1999 Oldsmobile Intrigue, front, with Heavy Duty Brakes
- Fits 1997-1998 Oldsmobile Regency, front, rear disc
Installation Notes
Inspect calipers, slide pins, and brake hoses before installation, and replace worn components as needed. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, then torque wheels to specification after installation. Follow a proper pad bed-in procedure to help establish even transfer material on the rotor faces. This kit is a front application only, so verify axle position and VIN or equipment notes before ordering.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
Front Brake Kit for GM Full-Size Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac applications. Part number 4512-45038 combines coated rotors, ceramic pads, and brake hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-coated rotors with a silver-gray finish for improved rust resistance
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 100% post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC rotors are made to G3000/G11H18 cast iron specifications and are processed dry, so they are ready to install without oil removal or extra prep. The coated surface is designed to resist corrosion, while the non-directional finish supports even pad contact and quieter braking. The 5000 Advanced ceramic pads are post-cured and scorched to help deliver consistent friction from the first stop. This part number, 4512-45038, is a practical choice for drivers servicing front brakes on vehicles such as the Buick LeSabre, Cadillac DeVille, Chevrolet Impala, and Pontiac Bonneville.
Vehicle Fitment
- Fits 1997-2005 Buick Park Avenue, front
- Fits 2000-2004 Buick LeSabre, front, 16 inch wheels
- Fits 1997-1999 Buick Riviera, front
- Fits 1997-2004 Cadillac DeVille, front
- Fits 2005 Cadillac DeVille, front, excluding Heavy Duty; to VIN 5U12-9028
- Fits 1997-2002 Cadillac Eldorado, front
- Fits 1997 Cadillac Seville, front
- Fits 2000-2004 Chevrolet Impala, front
- Fits 2005 Chevrolet Impala, front, to chassis/VIN 59143075
- Fits 2000-2004 Chevrolet Monte Carlo, front
- Fits 2005 Chevrolet Monte Carlo, front, to VIN 5914-8923
- Fits 2000-2004 Pontiac Bonneville, front
- Fits 1997-1999 Oldsmobile Aurora, front
- Fits 2001-2003 Oldsmobile Aurora, front
- Fits 1998-1999 Oldsmobile Intrigue, front, with Heavy Duty Brakes
- Fits 1997-1998 Oldsmobile Regency, front, rear disc
Installation Notes
Inspect calipers, slide pins, and brake hoses before installation, and replace worn components as needed. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, then torque wheels to specification after installation. Follow a proper pad bed-in procedure to help establish even transfer material on the rotor faces. This kit is a front application only, so verify axle position and VIN or equipment notes before ordering.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
Description
Front Brake Kit for GM Full-Size Cars
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac applications. Part number 4512-45038 combines coated rotors, ceramic pads, and brake hardware in one package for a complete front brake refresh.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-coated rotors with a silver-gray finish for improved rust resistance
- Rotors machined to OE-style tolerances with a non-directional finish for smoother pad bed-in
- 100% post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware uses PTFE coating, vulcanized rubber, and stainless steel construction
Product Details
DFC GEOSPEC rotors are made to G3000/G11H18 cast iron specifications and are processed dry, so they are ready to install without oil removal or extra prep. The coated surface is designed to resist corrosion, while the non-directional finish supports even pad contact and quieter braking. The 5000 Advanced ceramic pads are post-cured and scorched to help deliver consistent friction from the first stop. This part number, 4512-45038, is a practical choice for drivers servicing front brakes on vehicles such as the Buick LeSabre, Cadillac DeVille, Chevrolet Impala, and Pontiac Bonneville.
Vehicle Fitment
- Fits 1997-2005 Buick Park Avenue, front
- Fits 2000-2004 Buick LeSabre, front, 16 inch wheels
- Fits 1997-1999 Buick Riviera, front
- Fits 1997-2004 Cadillac DeVille, front
- Fits 2005 Cadillac DeVille, front, excluding Heavy Duty; to VIN 5U12-9028
- Fits 1997-2002 Cadillac Eldorado, front
- Fits 1997 Cadillac Seville, front
- Fits 2000-2004 Chevrolet Impala, front
- Fits 2005 Chevrolet Impala, front, to chassis/VIN 59143075
- Fits 2000-2004 Chevrolet Monte Carlo, front
- Fits 2005 Chevrolet Monte Carlo, front, to VIN 5914-8923
- Fits 2000-2004 Pontiac Bonneville, front
- Fits 1997-1999 Oldsmobile Aurora, front
- Fits 2001-2003 Oldsmobile Aurora, front
- Fits 1998-1999 Oldsmobile Intrigue, front, with Heavy Duty Brakes
- Fits 1997-1998 Oldsmobile Regency, front, rear disc
Installation Notes
Inspect calipers, slide pins, and brake hoses before installation, and replace worn components as needed. Clean the hub mounting surface thoroughly to reduce rotor runout concerns, then torque wheels to specification after installation. Follow a proper pad bed-in procedure to help establish even transfer material on the rotor faces. This kit is a front application only, so verify axle position and VIN or equipment notes before ordering.
Quality Assurance
DFC states that the rotors are 100% inspected for critical dimensions and balance, with vented rotors electronically mill-balanced when required. Each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
