Dynamite Friction 4512-42087 Disc Brake Kit - Front
Front Brake Kit for Jeep Wrangler
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jeep Wrangler applications. Part number 4512-42087 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
Key Features
- Fits 2007-2018 Jeep Wrangler front brake applications listed below
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-42087 for front axle brake service
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is engineered to OE specifications using G3000/G11H18 cast iron, tight machining tolerances, and balance inspection on vented rotors. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pad line is formulated for consistent friction across a wide range of vehicle applications, with post-curing, scorching, and NVH-focused shims for controlled stopping performance.
Fitment
- Fits 2018 Jeep Wrangler, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2018 Jeep Wrangler JK, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2012-2017 Jeep Wrangler, front, disc brake rotor - standard brakes.
- Fits 2007-2011 Jeep Wrangler, front.
Common Brake Issues This Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise from worn or fatigued hardware
- Uneven pad wear from aged caliper hardware
- Reduced stopping consistency from worn pads and rotors
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Use this kit for front brake service only on the listed Jeep Wrangler applications. The rotors are shipped dry and ready to install, and the non-directional finish helps the pads bed in more evenly. Inspect calipers, slides, and related brake components during service to confirm proper operation before returning the vehicle to the road. Part number 4512-42087 is intended for the front axle on the fitments shown above.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors are balance-checked during production. The rotors include a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function.
Front Brake Kit for Jeep Wrangler
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jeep Wrangler applications. Part number 4512-42087 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
Key Features
- Fits 2007-2018 Jeep Wrangler front brake applications listed below
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-42087 for front axle brake service
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is engineered to OE specifications using G3000/G11H18 cast iron, tight machining tolerances, and balance inspection on vented rotors. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pad line is formulated for consistent friction across a wide range of vehicle applications, with post-curing, scorching, and NVH-focused shims for controlled stopping performance.
Fitment
- Fits 2018 Jeep Wrangler, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2018 Jeep Wrangler JK, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2012-2017 Jeep Wrangler, front, disc brake rotor - standard brakes.
- Fits 2007-2011 Jeep Wrangler, front.
Common Brake Issues This Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise from worn or fatigued hardware
- Uneven pad wear from aged caliper hardware
- Reduced stopping consistency from worn pads and rotors
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Use this kit for front brake service only on the listed Jeep Wrangler applications. The rotors are shipped dry and ready to install, and the non-directional finish helps the pads bed in more evenly. Inspect calipers, slides, and related brake components during service to confirm proper operation before returning the vehicle to the road. Part number 4512-42087 is intended for the front axle on the fitments shown above.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors are balance-checked during production. The rotors include a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function.
Description
Front Brake Kit for Jeep Wrangler
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select Jeep Wrangler applications. Part number 4512-42087 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake repair.
Key Features
- Fits 2007-2018 Jeep Wrangler front brake applications listed below
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic pads are post-cured and scorched for stable friction performance
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-42087 for front axle brake service
DFC GEOSPEC and 5000 Advanced
The DFC GEOSPEC rotor line is engineered to OE specifications using G3000/G11H18 cast iron, tight machining tolerances, and balance inspection on vented rotors. The coated surface helps resist rust better than conventional paint or zinc finishes, while the dry packaging saves prep time during installation. The 5000 Advanced pad line is formulated for consistent friction across a wide range of vehicle applications, with post-curing, scorching, and NVH-focused shims for controlled stopping performance.
Fitment
- Fits 2018 Jeep Wrangler, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2018 Jeep Wrangler JK, front, JK chassis with standard brakes (302mm front rotors).
- Fits 2012-2017 Jeep Wrangler, front, disc brake rotor - standard brakes.
- Fits 2007-2011 Jeep Wrangler, front.
Common Brake Issues This Kit Helps Address
- Front brake rotor rust and surface corrosion
- Brake noise from worn or fatigued hardware
- Uneven pad wear from aged caliper hardware
- Reduced stopping consistency from worn pads and rotors
- Longer service time caused by cleaning oil-coated rotors
Installation Notes
Use this kit for front brake service only on the listed Jeep Wrangler applications. The rotors are shipped dry and ready to install, and the non-directional finish helps the pads bed in more evenly. Inspect calipers, slides, and related brake components during service to confirm proper operation before returning the vehicle to the road. Part number 4512-42087 is intended for the front axle on the fitments shown above.
Quality Assurance
Each DFC GEOSPEC rotor is inspected for critical dimensions and OE-spec compliance, and vented rotors are balance-checked during production. The rotors include a 12-month warranty against defects in material and workmanship. DFC brake pads are post-cured and assembled with premium shims, and the hardware kit is built to OE-style form, fit, and function.
