Dynamite Friction 4512-40156 Disc Brake Kit - Rear
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service replacement. Part number 4512-40156 combines coated rotors, ceramic brake pads, and brake hardware in one package for cleaner installation and consistent braking performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for even pad bed-in and smoother stops
- Dry-processed, ready-to-install rotors with no oil cleaning required
- Disc brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern braking systems that require stable friction characteristics and consistent response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce break-in time and supports immediate stopping performance. The included shims are designed to improve fit and reduce brake noise.
DFC GEOSPEC Coated Rotors are cast to G3000/G11H18 specifications and machined to tight tolerances. Each rotor receives a non-directional finish for more even pad contact, and vented rotors are electronically mill-balanced and inspected for critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes. Part number 4512-40156 is a practical choice for brake service on vehicles such as Honda Civic and Toyota Camry applications where OE-style fit and finish matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Vibration or harshness during braking
Installation Notes
Compatible With brake service on the listed application only; verify rotor size, pad shape, and hardware match before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. For best results, follow proper bedding procedures after installation and inspect caliper slides, mounting points, and brake fluid condition during service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and that vented rotors are balance-corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service replacement. Part number 4512-40156 combines coated rotors, ceramic brake pads, and brake hardware in one package for cleaner installation and consistent braking performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for even pad bed-in and smoother stops
- Dry-processed, ready-to-install rotors with no oil cleaning required
- Disc brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern braking systems that require stable friction characteristics and consistent response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce break-in time and supports immediate stopping performance. The included shims are designed to improve fit and reduce brake noise.
DFC GEOSPEC Coated Rotors are cast to G3000/G11H18 specifications and machined to tight tolerances. Each rotor receives a non-directional finish for more even pad contact, and vented rotors are electronically mill-balanced and inspected for critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes. Part number 4512-40156 is a practical choice for brake service on vehicles such as Honda Civic and Toyota Camry applications where OE-style fit and finish matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Vibration or harshness during braking
Installation Notes
Compatible With brake service on the listed application only; verify rotor size, pad shape, and hardware match before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. For best results, follow proper bedding procedures after installation and inspect caliper slides, mounting points, and brake fluid condition during service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and that vented rotors are balance-corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
Original: $430.24
-65%$430.24
$150.58Description
DFC Brake Kit with Coated Rotors
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads and hardware kit is a complete disc brake kit built for OE-style service replacement. Part number 4512-40156 combines coated rotors, ceramic brake pads, and brake hardware in one package for cleaner installation and consistent braking performance.
Key Features
- DFC GEOSPEC coated brake rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for even pad bed-in and smoother stops
- Dry-processed, ready-to-install rotors with no oil cleaning required
- Disc brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 5000 Advanced Brake Pads are formulated for modern braking systems that require stable friction characteristics and consistent response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce break-in time and supports immediate stopping performance. The included shims are designed to improve fit and reduce brake noise.
DFC GEOSPEC Coated Rotors are cast to G3000/G11H18 specifications and machined to tight tolerances. Each rotor receives a non-directional finish for more even pad contact, and vented rotors are electronically mill-balanced and inspected for critical dimensions. The coated surface helps resist rust better than conventional paint or zinc finishes. Part number 4512-40156 is a practical choice for brake service on vehicles such as Honda Civic and Toyota Camry applications where OE-style fit and finish matter.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake noise from worn or fatigued hardware
- Uneven pad wear caused by rotor surface irregularities
- Rust buildup on exposed rotor surfaces
- Longer pedal response from aged brake components
- Vibration or harshness during braking
Installation Notes
Compatible With brake service on the listed application only; verify rotor size, pad shape, and hardware match before installation. The rotors are shipped dry and ready to install, which helps reduce prep time during a standard brake job. For best results, follow proper bedding procedures after installation and inspect caliper slides, mounting points, and brake fluid condition during service.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and that vented rotors are balance-corrected when needed. The rotors include a 12-month warranty against defects in material and workmanship.
