Dynamite Friction 4512-40120 Disc Brake Kit - Front
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement and consistent stopping performance. It combines coated rotors, ceramic pads, and matching hardware for a complete front brake refresh on select Dodge Dakota and Dodge Durango applications.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor construction
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40120
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support stable braking and smoother operation. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced Brake Pads are post cured and scorched to reduce initial break-in requirements and deliver stable friction from the first stop. This kit is a practical choice for drivers searching for a front brake kit for 1999 Dodge Dakota front or 1998-1999 Dodge Durango front service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
Installation Notes and Tips
Fits 1999 Dodge Dakota, front, with 9 inch rear drums. Fits 1999 Dodge Dakota, front, with rear brake drum and 10 inch diameter. Fits 1998-1999 Dodge Durango, front. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle service procedure for rotor and pad bedding after the repair. Part number 4512-40120 should be verified against the vehicle’s brake configuration before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement and consistent stopping performance. It combines coated rotors, ceramic pads, and matching hardware for a complete front brake refresh on select Dodge Dakota and Dodge Durango applications.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor construction
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40120
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support stable braking and smoother operation. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced Brake Pads are post cured and scorched to reduce initial break-in requirements and deliver stable friction from the first stop. This kit is a practical choice for drivers searching for a front brake kit for 1999 Dodge Dakota front or 1998-1999 Dodge Durango front service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
Installation Notes and Tips
Fits 1999 Dodge Dakota, front, with 9 inch rear drums. Fits 1999 Dodge Dakota, front, with rear brake drum and 10 inch diameter. Fits 1998-1999 Dodge Durango, front. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle service procedure for rotor and pad bedding after the repair. Part number 4512-40120 should be verified against the vehicle’s brake configuration before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $191.27
-65%$191.27
$66.94Description
Brake Kit for Dodge Dakota and Durango
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement and consistent stopping performance. It combines coated rotors, ceramic pads, and matching hardware for a complete front brake refresh on select Dodge Dakota and Dodge Durango applications.
- Front disc brake kit with rotors, pads, and hardware
- GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors ready to install without oil removal
- Non-directional rotor finish for even pad bed-in and quieter stops
- G3000/G11H18 cast iron rotor construction
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40120
Product Details
DFC GEOSPEC Coated Rotors are machined to tight tolerances, inspected for critical dimensions, and finished to support stable braking and smoother operation. The coating is designed to resist rust better than conventional paint or zinc finishes, while the dry packaging helps reduce prep time during installation. The 5000 Advanced Brake Pads are post cured and scorched to reduce initial break-in requirements and deliver stable friction from the first stop. This kit is a practical choice for drivers searching for a front brake kit for 1999 Dodge Dakota front or 1998-1999 Dodge Durango front service.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded brake hardware
- Reduced stopping consistency from aged pad friction material
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from worn hardware components
Installation Notes and Tips
Fits 1999 Dodge Dakota, front, with 9 inch rear drums. Fits 1999 Dodge Dakota, front, with rear brake drum and 10 inch diameter. Fits 1998-1999 Dodge Durango, front. Inspect calipers, slides, and brake fluid condition before installation, and follow the vehicle service procedure for rotor and pad bedding after the repair. Part number 4512-40120 should be verified against the vehicle’s brake configuration before ordering.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical attributes and comes with a 12-month warranty against defects in material and workmanship. The brake pads are post cured and assembled with premium shims, and the hardware kit is engineered to OE-style form, fit, and function.
