Dynamite Friction 4512-40102 Disc Brake Kit - Front
Front Brake Kit for Sprinter and Crafter
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select Volkswagen Crafter, Volkswagen Crafter Van, Mercedes-Benz Sprinter 3500, and Dodge Sprinter 3500 applications. Part number 4512-40102 combines coated rotors, ceramic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction matched to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40102 for front brake service on select vans and chassis cabs
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want a coated rotor that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad compound is formulated for consistent friction and reduced break-in time, while the included hardware kit addresses worn or corroded brake clips and related components that can contribute to noise and uneven pad movement. This front brake kit is a practical OE-style service solution for Volkswagen Crafter and Mercedes-Benz/Dodge Sprinter 3500 front axle maintenance.
What It Helps Address
- Front brake noise from worn hardware or pad movement
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Fits 2016-2017 Volkswagen Crafter, front; Fits 2008-2017 Volkswagen Crafter Van, front; Fits 2010-2013 Mercedes-Benz Sprinter 3500, front; Fits 2007-2009 Dodge Sprinter 3500, front. Confirm wheel configuration and market-specific notes before ordering, including single rear wheel, dual rear wheel, and Mexico applications where listed. Part number 4512-40102 is intended for front axle service and should be installed with proper brake cleaning and torque procedures.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotor, pad, and hardware components are engineered to OE-style standards for fit, finish, and braking consistency.
Front Brake Kit for Sprinter and Crafter
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select Volkswagen Crafter, Volkswagen Crafter Van, Mercedes-Benz Sprinter 3500, and Dodge Sprinter 3500 applications. Part number 4512-40102 combines coated rotors, ceramic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction matched to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40102 for front brake service on select vans and chassis cabs
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want a coated rotor that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad compound is formulated for consistent friction and reduced break-in time, while the included hardware kit addresses worn or corroded brake clips and related components that can contribute to noise and uneven pad movement. This front brake kit is a practical OE-style service solution for Volkswagen Crafter and Mercedes-Benz/Dodge Sprinter 3500 front axle maintenance.
What It Helps Address
- Front brake noise from worn hardware or pad movement
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Fits 2016-2017 Volkswagen Crafter, front; Fits 2008-2017 Volkswagen Crafter Van, front; Fits 2010-2013 Mercedes-Benz Sprinter 3500, front; Fits 2007-2009 Dodge Sprinter 3500, front. Confirm wheel configuration and market-specific notes before ordering, including single rear wheel, dual rear wheel, and Mexico applications where listed. Part number 4512-40102 is intended for front axle service and should be installed with proper brake cleaning and torque procedures.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotor, pad, and hardware components are engineered to OE-style standards for fit, finish, and braking consistency.
Original: $234.30
-65%$234.30
$82.00Description
Front Brake Kit for Sprinter and Crafter
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit for select Volkswagen Crafter, Volkswagen Crafter Van, Mercedes-Benz Sprinter 3500, and Dodge Sprinter 3500 applications. Part number 4512-40102 combines coated rotors, ceramic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- Dry-processed rotors arrive ready to install without oil removal
- G3000/G11H18 cast iron construction matched to OE specifications
- Non-directional rotor finish supports even pad bed-in and smoother braking
- DFC 5000 Advanced ceramic pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-40102 for front brake service on select vans and chassis cabs
Product Details
DFC’s GEOSPEC rotor line is built for drivers who want a coated rotor that resists rust better than conventional paint or zinc finishes. Each rotor is machined to tight tolerances, finished with a non-directional surface, and inspected for balance and critical dimensions. The 5000 Advanced pad compound is formulated for consistent friction and reduced break-in time, while the included hardware kit addresses worn or corroded brake clips and related components that can contribute to noise and uneven pad movement. This front brake kit is a practical OE-style service solution for Volkswagen Crafter and Mercedes-Benz/Dodge Sprinter 3500 front axle maintenance.
What It Helps Address
- Front brake noise from worn hardware or pad movement
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from aged rotors and pads
- Longer stopping distances caused by worn friction material
- Brake vibration related to rotor finish or wear
Installation Notes
Fits 2016-2017 Volkswagen Crafter, front; Fits 2008-2017 Volkswagen Crafter Van, front; Fits 2010-2013 Mercedes-Benz Sprinter 3500, front; Fits 2007-2009 Dodge Sprinter 3500, front. Confirm wheel configuration and market-specific notes before ordering, including single rear wheel, dual rear wheel, and Mexico applications where listed. Part number 4512-40102 is intended for front axle service and should be installed with proper brake cleaning and torque procedures.
Quality Assurance
DFC GEOSPEC rotors are backed by a 12-month warranty against defects in material and workmanship. The rotor, pad, and hardware components are engineered to OE-style standards for fit, finish, and braking consistency.
