Dynamite Friction 4512-40096 Disc Brake Kit - Rear
Rear Brake Kit for 2006 Dodge Sprinter 3500
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-40096, is a rear disc brake kit built for the 2006 Dodge Sprinter 3500 with clip style brake pad sensors. It combines coated rotors, ceramic pads, and matching brake hardware in one service package for a complete rear brake refresh.
Part number 4512-40096 is engineered for drivers and technicians looking for an OE-style rear brake service kit for the 2006 Dodge Sprinter 3500. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are post-cured, scorched, and paired with premium shims for more consistent friction and reduced noise.
Key Features
- Rear disc brake kit for the 2006 Dodge Sprinter 3500
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware included for a complete rear service
- OE-style rotor machining with non-directional finish for smoother bed-in
- Part number 4512-40096 for fitment-based search accuracy
Product Details
This Dynamite Friction brake kit is designed around the rear axle service needs of the Dodge Sprinter 3500. The coated rotors are processed dry and shipped dry, which eliminates the need to clean off oil before installation. The rotor casting uses G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to support even pad contact and quieter braking. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. Part number 4512-40096 is a practical choice for a rear brake job on the 2006 Dodge Sprinter 3500.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor finish
- Reduced spring tension or caliper movement caused by aged hardware
- Brake service delays from sourcing rotors, pads, and hardware separately
Installation Notes
Compatible With 2006 Dodge Sprinter 3500, rear, with clip style brake pad sensors. Inspect calipers, slides, and sensor-related components before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4512-40096 is intended for rear axle service only.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Rear Brake Kit for 2006 Dodge Sprinter 3500
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-40096, is a rear disc brake kit built for the 2006 Dodge Sprinter 3500 with clip style brake pad sensors. It combines coated rotors, ceramic pads, and matching brake hardware in one service package for a complete rear brake refresh.
Part number 4512-40096 is engineered for drivers and technicians looking for an OE-style rear brake service kit for the 2006 Dodge Sprinter 3500. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are post-cured, scorched, and paired with premium shims for more consistent friction and reduced noise.
Key Features
- Rear disc brake kit for the 2006 Dodge Sprinter 3500
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware included for a complete rear service
- OE-style rotor machining with non-directional finish for smoother bed-in
- Part number 4512-40096 for fitment-based search accuracy
Product Details
This Dynamite Friction brake kit is designed around the rear axle service needs of the Dodge Sprinter 3500. The coated rotors are processed dry and shipped dry, which eliminates the need to clean off oil before installation. The rotor casting uses G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to support even pad contact and quieter braking. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. Part number 4512-40096 is a practical choice for a rear brake job on the 2006 Dodge Sprinter 3500.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor finish
- Reduced spring tension or caliper movement caused by aged hardware
- Brake service delays from sourcing rotors, pads, and hardware separately
Installation Notes
Compatible With 2006 Dodge Sprinter 3500, rear, with clip style brake pad sensors. Inspect calipers, slides, and sensor-related components before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4512-40096 is intended for rear axle service only.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
Original: $204.54
-65%$204.54
$71.59Description
Rear Brake Kit for 2006 Dodge Sprinter 3500
Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware, part number 4512-40096, is a rear disc brake kit built for the 2006 Dodge Sprinter 3500 with clip style brake pad sensors. It combines coated rotors, ceramic pads, and matching brake hardware in one service package for a complete rear brake refresh.
Part number 4512-40096 is engineered for drivers and technicians looking for an OE-style rear brake service kit for the 2006 Dodge Sprinter 3500. The DFC GEOSPEC rotor finish helps resist rust, while the 5000 Advanced pads are post-cured, scorched, and paired with premium shims for more consistent friction and reduced noise.
Key Features
- Rear disc brake kit for the 2006 Dodge Sprinter 3500
- DFC GEOSPEC coated rotors with dry, ready-to-install finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved NVH control
- Brake hardware included for a complete rear service
- OE-style rotor machining with non-directional finish for smoother bed-in
- Part number 4512-40096 for fitment-based search accuracy
Product Details
This Dynamite Friction brake kit is designed around the rear axle service needs of the Dodge Sprinter 3500. The coated rotors are processed dry and shipped dry, which eliminates the need to clean off oil before installation. The rotor casting uses G3000/G11H18 cast iron specifications and is machined to tight tolerances, then finished with a non-directional surface to support even pad contact and quieter braking. The 5000 Advanced pads are formulated for stable friction performance and are assembled with shims that help reduce brake noise and vibration. Part number 4512-40096 is a practical choice for a rear brake job on the 2006 Dodge Sprinter 3500.
What It Helps Address
- Rear brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven braking feel from worn rotor finish
- Reduced spring tension or caliper movement caused by aged hardware
- Brake service delays from sourcing rotors, pads, and hardware separately
Installation Notes
Compatible With 2006 Dodge Sprinter 3500, rear, with clip style brake pad sensors. Inspect calipers, slides, and sensor-related components before installation. Clean the hub mounting surface, verify rotor seating, and follow the vehicle manufacturer’s torque and bedding procedures after installation. Part number 4512-40096 is intended for rear axle service only.
Quality Assurance
DFC GEOSPEC coated rotors are 100% inspected for critical dimensions and balance, and each rotor includes a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses PTFE coating, vulcanized rubber, and stainless steel for OE-style form and function.
