Dynamite Friction 4512-39033 Disc Brake Kit - Front
Front Brake Kit for Chrysler, Dodge, and Plymouth
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Chrysler, Dodge, and Plymouth applications. Part number 4512-39033 combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-39033 for front brake service applications
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. DFC GEOSPEC coated rotors are processed dry and ready to install, with a coating designed to resist rust better than conventional paint or zinc finishes. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface for smoother pad seating and quieter operation. The included hardware is engineered to restore proper spring tension and caliper movement on worn brake assemblies. This front brake kit is a direct-fit service solution for 1995-2000 Chrysler Cirrus, 1996-2000 Chrysler Sebring, 1995-2000 Dodge Stratus, and 1996-2000 Plymouth Breeze. Fits 1995-2000 Chrysler Cirrus, front; fits 1996-2000 Chrysler Sebring, front; fits 1995-2000 Dodge Stratus, front; fits 1996-2000 Plymouth Breeze, front. Part number 4512-39033 is listed for these front axle applications.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness from worn front rotors
- Longer pedal response from aged brake components
Installation Notes and Tips
Confirm front axle fitment before ordering and match the vehicle to the listed year, make, and model. Inspect calipers, slides, and brake hoses during service, and clean the hub mounting surface before installing the new rotors. The coated rotor surface is ready to install without additional preparation; the coating is removed naturally by the pad contact area during normal braking. For best results, follow a proper bedding procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC’s pad and rotor programs are developed around OE-style friction and dimensional requirements for consistent service performance.
Front Brake Kit for Chrysler, Dodge, and Plymouth
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Chrysler, Dodge, and Plymouth applications. Part number 4512-39033 combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-39033 for front brake service applications
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. DFC GEOSPEC coated rotors are processed dry and ready to install, with a coating designed to resist rust better than conventional paint or zinc finishes. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface for smoother pad seating and quieter operation. The included hardware is engineered to restore proper spring tension and caliper movement on worn brake assemblies. This front brake kit is a direct-fit service solution for 1995-2000 Chrysler Cirrus, 1996-2000 Chrysler Sebring, 1995-2000 Dodge Stratus, and 1996-2000 Plymouth Breeze. Fits 1995-2000 Chrysler Cirrus, front; fits 1996-2000 Chrysler Sebring, front; fits 1995-2000 Dodge Stratus, front; fits 1996-2000 Plymouth Breeze, front. Part number 4512-39033 is listed for these front axle applications.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness from worn front rotors
- Longer pedal response from aged brake components
Installation Notes and Tips
Confirm front axle fitment before ordering and match the vehicle to the listed year, make, and model. Inspect calipers, slides, and brake hoses during service, and clean the hub mounting surface before installing the new rotors. The coated rotor surface is ready to install without additional preparation; the coating is removed naturally by the pad contact area during normal braking. For best results, follow a proper bedding procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC’s pad and rotor programs are developed around OE-style friction and dimensional requirements for consistent service performance.
Original: $136.83
-65%$136.83
$47.89Description
Front Brake Kit for Chrysler, Dodge, and Plymouth
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Chrysler, Dodge, and Plymouth applications. Part number 4512-39033 combines coated rotors, ceramic pads, and brake hardware components in one package for a complete front brake refresh.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Rotors machined to OE-style tolerances with a non-directional finish
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-39033 for front brake service applications
Product Details
DFC 5000 Advanced Brake Pads are formulated for stable friction performance and consistent stopping response. The pads are post cured, then scorched to remove uncured bonding agents, which helps reduce the need for extended bedding-in. DFC GEOSPEC coated rotors are processed dry and ready to install, with a coating designed to resist rust better than conventional paint or zinc finishes. The rotors are cast to G3000/G11H18 specifications, machined to tight tolerances, and finished with a non-directional surface for smoother pad seating and quieter operation. The included hardware is engineered to restore proper spring tension and caliper movement on worn brake assemblies. This front brake kit is a direct-fit service solution for 1995-2000 Chrysler Cirrus, 1996-2000 Chrysler Sebring, 1995-2000 Dodge Stratus, and 1996-2000 Plymouth Breeze. Fits 1995-2000 Chrysler Cirrus, front; fits 1996-2000 Chrysler Sebring, front; fits 1995-2000 Dodge Stratus, front; fits 1996-2000 Plymouth Breeze, front. Part number 4512-39033 is listed for these front axle applications.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened hardware
- Rust buildup on exposed rotor surfaces
- Reduced braking smoothness from worn front rotors
- Longer pedal response from aged brake components
Installation Notes and Tips
Confirm front axle fitment before ordering and match the vehicle to the listed year, make, and model. Inspect calipers, slides, and brake hoses during service, and clean the hub mounting surface before installing the new rotors. The coated rotor surface is ready to install without additional preparation; the coating is removed naturally by the pad contact area during normal braking. For best results, follow a proper bedding procedure after installation.
Quality Assurance
Each DFC GEOSPEC rotor is 100% inspected for critical dimensions and balance, and every rotor includes a 12-month warranty against defects in material and workmanship. DFC’s pad and rotor programs are developed around OE-style friction and dimensional requirements for consistent service performance.
