Dynamite Friction 4512-37010 Disc Brake Kit - Front
Front Brake Kit for Isuzu and Honda
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Isuzu and Honda applications. Part number 4512-37010 combines coated rotors, ceramic brake pads, and matching brake hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for select 2001-2004 Isuzu and Honda vehicles
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4512-37010 is engineered for drivers who need a front brake service kit that matches the original equipment style of the vehicle. The GEOSPEC rotors are processed dry and ready to install, helping reduce prep time during brake service. Their G3000/G11H18 cast iron construction, tight machining tolerances, and balance inspection support stable braking performance on daily-driven vehicles such as the Isuzu Rodeo, Isuzu Rodeo Sport, Isuzu Axiom, and Honda Passport.
The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with noise-reducing shims. The included hardware is designed to restore proper caliper movement and spring tension, which is important on older front brake systems where corrosion and fatigue can affect wear patterns and pedal feel. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake clips
- Reduced stopping performance from worn rotors and friction material
- Brake vibration or pulsation related to rotor wear
- Extended service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2003-2004 Isuzu Axiom, front; 2002-2004 Isuzu Rodeo, front; 2002-2003 Isuzu Rodeo Sport, front; 2002 Honda Passport, front; 2002 Isuzu Axiom, front with vehicle production date from 11/01; 2001 Isuzu Rodeo, front with vehicle production date from 7/01; 2001 Isuzu Rodeo Sport, front with vehicle production date from 7/01 or to 6/01. Verify rotor size, production date, and front axle configuration before ordering. Clean hub surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
Front Brake Kit for Isuzu and Honda
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Isuzu and Honda applications. Part number 4512-37010 combines coated rotors, ceramic brake pads, and matching brake hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for select 2001-2004 Isuzu and Honda vehicles
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4512-37010 is engineered for drivers who need a front brake service kit that matches the original equipment style of the vehicle. The GEOSPEC rotors are processed dry and ready to install, helping reduce prep time during brake service. Their G3000/G11H18 cast iron construction, tight machining tolerances, and balance inspection support stable braking performance on daily-driven vehicles such as the Isuzu Rodeo, Isuzu Rodeo Sport, Isuzu Axiom, and Honda Passport.
The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with noise-reducing shims. The included hardware is designed to restore proper caliper movement and spring tension, which is important on older front brake systems where corrosion and fatigue can affect wear patterns and pedal feel. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake clips
- Reduced stopping performance from worn rotors and friction material
- Brake vibration or pulsation related to rotor wear
- Extended service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2003-2004 Isuzu Axiom, front; 2002-2004 Isuzu Rodeo, front; 2002-2003 Isuzu Rodeo Sport, front; 2002 Honda Passport, front; 2002 Isuzu Axiom, front with vehicle production date from 11/01; 2001 Isuzu Rodeo, front with vehicle production date from 7/01; 2001 Isuzu Rodeo Sport, front with vehicle production date from 7/01 or to 6/01. Verify rotor size, production date, and front axle configuration before ordering. Clean hub surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
Original: $188.71
-65%$188.71
$66.05Description
Front Brake Kit for Isuzu and Honda
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for OE-style replacement on select Isuzu and Honda applications. Part number 4512-37010 combines coated rotors, ceramic brake pads, and matching brake hardware for a complete front brake refresh.
Key Features
- Front disc brake kit for select 2001-2004 Isuzu and Honda vehicles
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pads for reduced initial break-in time
- Premium rubber-steel-rubber shims for improved NVH control
- Non-directional rotor finish for even pad bed-in and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC 4512-37010 is engineered for drivers who need a front brake service kit that matches the original equipment style of the vehicle. The GEOSPEC rotors are processed dry and ready to install, helping reduce prep time during brake service. Their G3000/G11H18 cast iron construction, tight machining tolerances, and balance inspection support stable braking performance on daily-driven vehicles such as the Isuzu Rodeo, Isuzu Rodeo Sport, Isuzu Axiom, and Honda Passport.
The 5000 Advanced ceramic pads are formulated for consistent friction and are assembled with noise-reducing shims. The included hardware is designed to restore proper caliper movement and spring tension, which is important on older front brake systems where corrosion and fatigue can affect wear patterns and pedal feel. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weakened brake clips
- Reduced stopping performance from worn rotors and friction material
- Brake vibration or pulsation related to rotor wear
- Extended service time from rotors that require cleaning before installation
Installation Notes
Compatible With 2003-2004 Isuzu Axiom, front; 2002-2004 Isuzu Rodeo, front; 2002-2003 Isuzu Rodeo Sport, front; 2002 Honda Passport, front; 2002 Isuzu Axiom, front with vehicle production date from 11/01; 2001 Isuzu Rodeo, front with vehicle production date from 7/01; 2001 Isuzu Rodeo Sport, front with vehicle production date from 7/01 or to 6/01. Verify rotor size, production date, and front axle configuration before ordering. Clean hub surfaces, inspect calipers and slides, and follow proper pad bedding procedures after installation.
Quality Assurance
DFC GEOSPEC rotors are 100% inspected for critical dimensions and balance, and each rotor is backed by a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, while the hardware kit is built to OE-style form, fit, and function.
