Dynamite Friction 4512-31145 Disc Brake Kit - Rear
Rear Brake Kit for BMW E30 Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select BMW 3 Series models. Part number 4512-31145 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, dry-shipped rotors ready for installation
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bed-in
Product Details
DFC’s GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances for stable braking performance. The non-directional finish supports even pad transfer and quieter stops. The 5000 Advanced ceramic pads are formulated for consistent friction, and the hardware kit is built to restore proper spring tension and caliper movement on aging brake assemblies. This part number 4512-31145 is a practical choice for BMW 325i, BMW 325is, BMW 325e, BMW 325es, BMW 325iX, BMW 318i, and BMW 318is rear brake service.
Used For
- Rear brake noise caused by worn pads or fatigued hardware
- Uneven rear pad wear from corroded or weakened clips and shims
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged rear brake components
- Brake service on BMW 325i rear brake kit and BMW 318i rear brake kit applications
Installation Notes
Fits 1991 BMW 318i, rear; vehicle production date to 4/91. Fits 1991 BMW 318is, rear; vehicle production date to 4/91. Fits 1987-1991 BMW 325i, rear; Girling calipers or ATE calipers. Fits 1987-1991 BMW 325is, rear; Girling calipers or ATE calipers. Fits 1991 BMW 325iX, rear; ATE calipers or Girling calipers. Fits 1984-1987 BMW 325e, rear; ATE calipers or Girling calipers. Fits 1986-1987 BMW 325es, rear; with ATE calipers or Girling calipers. Verify caliper type and production date before ordering. Part number 4512-31145 is intended for rear axle service only.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are corrected when needed using electronic mill-balance processing. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship.
Rear Brake Kit for BMW E30 Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select BMW 3 Series models. Part number 4512-31145 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, dry-shipped rotors ready for installation
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bed-in
Product Details
DFC’s GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances for stable braking performance. The non-directional finish supports even pad transfer and quieter stops. The 5000 Advanced ceramic pads are formulated for consistent friction, and the hardware kit is built to restore proper spring tension and caliper movement on aging brake assemblies. This part number 4512-31145 is a practical choice for BMW 325i, BMW 325is, BMW 325e, BMW 325es, BMW 325iX, BMW 318i, and BMW 318is rear brake service.
Used For
- Rear brake noise caused by worn pads or fatigued hardware
- Uneven rear pad wear from corroded or weakened clips and shims
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged rear brake components
- Brake service on BMW 325i rear brake kit and BMW 318i rear brake kit applications
Installation Notes
Fits 1991 BMW 318i, rear; vehicle production date to 4/91. Fits 1991 BMW 318is, rear; vehicle production date to 4/91. Fits 1987-1991 BMW 325i, rear; Girling calipers or ATE calipers. Fits 1987-1991 BMW 325is, rear; Girling calipers or ATE calipers. Fits 1991 BMW 325iX, rear; ATE calipers or Girling calipers. Fits 1984-1987 BMW 325e, rear; ATE calipers or Girling calipers. Fits 1986-1987 BMW 325es, rear; with ATE calipers or Girling calipers. Verify caliper type and production date before ordering. Part number 4512-31145 is intended for rear axle service only.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are corrected when needed using electronic mill-balance processing. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship.
Original: $127.46
-65%$127.46
$44.61Description
Rear Brake Kit for BMW E30 Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for rear brake service on select BMW 3 Series models. Part number 4512-31145 combines coated rotors, ceramic pads, and matching brake hardware for a complete rear brake refresh.
Key Features
- DFC GEOSPEC coated rear rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Dry-processed, dry-shipped rotors ready for installation
- Hardware kit engineered with PTFE coating, vulcanized rubber, and stainless steel
- OE-style rotor machining with non-directional finish for smoother pad bed-in
Product Details
DFC’s GEOSPEC rotor coating is designed to resist rust better than conventional paint or zinc finishes, while the cast iron rotor construction is machined to tight tolerances for stable braking performance. The non-directional finish supports even pad transfer and quieter stops. The 5000 Advanced ceramic pads are formulated for consistent friction, and the hardware kit is built to restore proper spring tension and caliper movement on aging brake assemblies. This part number 4512-31145 is a practical choice for BMW 325i, BMW 325is, BMW 325e, BMW 325es, BMW 325iX, BMW 318i, and BMW 318is rear brake service.
Used For
- Rear brake noise caused by worn pads or fatigued hardware
- Uneven rear pad wear from corroded or weakened clips and shims
- Rust buildup on exposed rotor surfaces
- Reduced braking consistency from aged rear brake components
- Brake service on BMW 325i rear brake kit and BMW 318i rear brake kit applications
Installation Notes
Fits 1991 BMW 318i, rear; vehicle production date to 4/91. Fits 1991 BMW 318is, rear; vehicle production date to 4/91. Fits 1987-1991 BMW 325i, rear; Girling calipers or ATE calipers. Fits 1987-1991 BMW 325is, rear; Girling calipers or ATE calipers. Fits 1991 BMW 325iX, rear; ATE calipers or Girling calipers. Fits 1984-1987 BMW 325e, rear; ATE calipers or Girling calipers. Fits 1986-1987 BMW 325es, rear; with ATE calipers or Girling calipers. Verify caliper type and production date before ordering. Part number 4512-31145 is intended for rear axle service only.
Quality Assurance
Each rotor is inspected for critical dimensions and balance, and all vented rotors are corrected when needed using electronic mill-balance processing. DFC states that every rotor is covered by a 12-month warranty against defects in material and workmanship.
