Dynamite Friction 4512-31084 Disc Brake Kit - Front
Brake Kit for BMW Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select BMW models. Part number 4512-31084 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
Compatible with 2016-2020 BMW 750i xDrive, 2016-2019 BMW 750i, 2017-2018 BMW 750Li xDrive, 2016 BMW 750Li xDrive, 2019-2020 BMW X5, and 2019-2020 BMW X7 front brake applications, including standard brake setups and the listed rotor configurations.
Key Features
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleanup required
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit built with PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-31084 for front brake service
Product Details
DFC designed this brake kit for OE-style fitment and consistent braking performance on BMW 750i, 750i xDrive, 750Li xDrive, X5, and X7 front axle applications. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The ceramic pads are formulated for stable friction characteristics, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This makes 4512-31084 a practical choice for front brake replacement on BMW vehicles that require a complete rotor, pad, and hardware service package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust on exposed braking surfaces
- Uneven pad wear caused by aged clips or caliper movement
- Pulsation or rough braking from worn front rotors
- Extended stopping distance from depleted brake friction material
Installation Notes
Install on the front axle only. Verify rotor style and brake configuration against the vehicle notes before ordering, especially on BMW 750i, 750i xDrive, X5, and X7 applications with original design aluminum hat rotors or optional design full cast rotors. Clean the rotor friction surface before installation if needed, and follow proper bedding procedures after service to help the pads and rotors seat evenly. Part number 4512-31084 is intended for direct brake service on the listed front applications.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, processed to tight tolerances, and fully inspected for critical attributes. The coated rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses corrosion-resistant materials to support reliable brake service.
Brake Kit for BMW Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select BMW models. Part number 4512-31084 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
Compatible with 2016-2020 BMW 750i xDrive, 2016-2019 BMW 750i, 2017-2018 BMW 750Li xDrive, 2016 BMW 750Li xDrive, 2019-2020 BMW X5, and 2019-2020 BMW X7 front brake applications, including standard brake setups and the listed rotor configurations.
Key Features
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleanup required
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit built with PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-31084 for front brake service
Product Details
DFC designed this brake kit for OE-style fitment and consistent braking performance on BMW 750i, 750i xDrive, 750Li xDrive, X5, and X7 front axle applications. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The ceramic pads are formulated for stable friction characteristics, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This makes 4512-31084 a practical choice for front brake replacement on BMW vehicles that require a complete rotor, pad, and hardware service package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust on exposed braking surfaces
- Uneven pad wear caused by aged clips or caliper movement
- Pulsation or rough braking from worn front rotors
- Extended stopping distance from depleted brake friction material
Installation Notes
Install on the front axle only. Verify rotor style and brake configuration against the vehicle notes before ordering, especially on BMW 750i, 750i xDrive, X5, and X7 applications with original design aluminum hat rotors or optional design full cast rotors. Clean the rotor friction surface before installation if needed, and follow proper bedding procedures after service to help the pads and rotors seat evenly. Part number 4512-31084 is intended for direct brake service on the listed front applications.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, processed to tight tolerances, and fully inspected for critical attributes. The coated rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses corrosion-resistant materials to support reliable brake service.
Original: $427.42
-65%$427.42
$149.60Description
Brake Kit for BMW Front Applications
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front brake service on select BMW models. Part number 4512-31084 combines coated rotors, ceramic pads, and brake hardware in one service kit for a cleaner, more complete brake job.
Compatible with 2016-2020 BMW 750i xDrive, 2016-2019 BMW 750i, 2017-2018 BMW 750Li xDrive, 2016 BMW 750Li xDrive, 2019-2020 BMW X5, and 2019-2020 BMW X7 front brake applications, including standard brake setups and the listed rotor configurations.
Key Features
- DFC 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- GeoSpec coated rotors with silver-gray corrosion-resistant finish
- Dry-processed, ready-to-install rotors with no oil cleanup required
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Hardware kit built with PTFE coating, vulcanized rubber, and stainless steel
- Part number 4512-31084 for front brake service
Product Details
DFC designed this brake kit for OE-style fitment and consistent braking performance on BMW 750i, 750i xDrive, 750Li xDrive, X5, and X7 front axle applications. The coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required. The ceramic pads are formulated for stable friction characteristics, while the included hardware addresses worn or corroded brake clips and related components that can affect caliper movement and pad wear. This makes 4512-31084 a practical choice for front brake replacement on BMW vehicles that require a complete rotor, pad, and hardware service package.
Common Brake Issues This Kit Can Address
- Brake noise from worn pads or fatigued hardware
- Rotor rust on exposed braking surfaces
- Uneven pad wear caused by aged clips or caliper movement
- Pulsation or rough braking from worn front rotors
- Extended stopping distance from depleted brake friction material
Installation Notes
Install on the front axle only. Verify rotor style and brake configuration against the vehicle notes before ordering, especially on BMW 750i, 750i xDrive, X5, and X7 applications with original design aluminum hat rotors or optional design full cast rotors. Clean the rotor friction surface before installation if needed, and follow proper bedding procedures after service to help the pads and rotors seat evenly. Part number 4512-31084 is intended for direct brake service on the listed front applications.
Quality Assurance
DFC states that the rotors are manufactured to OE specifications, processed to tight tolerances, and fully inspected for critical attributes. The coated rotors include a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit uses corrosion-resistant materials to support reliable brake service.
