Dynamite Friction 4512-31060 Disc Brake Kit - Front
Front Brake Kit for BMW 650i, 535i, 550i
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31060, is a front disc brake kit built for select BMW applications from 2010-2018. It combines coated rotors, low metallic pads, and brake hardware designed to restore braking performance, reduce noise, and simplify service.
Key Features
- DFC GEOSPEC coated front rotors with a dry, ready-to-install finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Part number 4512-31060 for front axle service
Product Details
DFC designed this brake kit to address the wear items that affect stopping consistency over time. The coated rotors use a silver-gray corrosion-resistant finish and are processed dry, so there is no oil coating to clean before installation. The rotors are manufactured to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are post cured and scorched to reduce initial break-in requirements, while the included hardware kit helps replace fatigued or corroded brake hardware that can contribute to caliper movement, uneven wear, and noise. This kit is a practical choice for BMW 650i Gran Coupe, BMW 535i GT, BMW 550i xDrive, and other listed front axle applications where OE-style brake service is required.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn front rotors
- Longer service time caused by cleaning oil-coated rotors
- Premature rotor rust on exposed braking surfaces
Installation Notes
Fits 2013-2018 BMW 650i Gran Coupe, front; 2012-2018 BMW 650i xDrive, front; 2013-2018 BMW 650i xDrive Gran Coupe, front; 2010-2017 BMW 535i GT, front; 2011-2017 BMW 535i GT xDrive, front; 2012-2017 BMW 650i, front; 2011-2016 BMW 535i, front; 2011-2016 BMW 550i, front; 2011-2016 BMW 550i xDrive, front; 2011-2015 BMW 740i, front; 2015 BMW 740Ld xDrive, front; 2011-2015 BMW 740Li, front; 2013-2015 BMW 740Li xDrive, front; 2013-2015 BMW ActiveHybrid 7, front. Verify rotor style before ordering: some applications list both aluminum hat and full cast rotor designs. Follow OE service procedures, inspect calipers and slides, and replace the pad wear sensor where required by the vehicle application.
Quality Assurance
DFC rotors are 100% inspected for balance and critical attributes, and each rotor is backed by a 12-month warranty against defects in material and workmanship. Part number 4512-31060 is engineered for OE-style fit, form, and function in the listed BMW front brake applications.
Front Brake Kit for BMW 650i, 535i, 550i
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31060, is a front disc brake kit built for select BMW applications from 2010-2018. It combines coated rotors, low metallic pads, and brake hardware designed to restore braking performance, reduce noise, and simplify service.
Key Features
- DFC GEOSPEC coated front rotors with a dry, ready-to-install finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Part number 4512-31060 for front axle service
Product Details
DFC designed this brake kit to address the wear items that affect stopping consistency over time. The coated rotors use a silver-gray corrosion-resistant finish and are processed dry, so there is no oil coating to clean before installation. The rotors are manufactured to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are post cured and scorched to reduce initial break-in requirements, while the included hardware kit helps replace fatigued or corroded brake hardware that can contribute to caliper movement, uneven wear, and noise. This kit is a practical choice for BMW 650i Gran Coupe, BMW 535i GT, BMW 550i xDrive, and other listed front axle applications where OE-style brake service is required.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn front rotors
- Longer service time caused by cleaning oil-coated rotors
- Premature rotor rust on exposed braking surfaces
Installation Notes
Fits 2013-2018 BMW 650i Gran Coupe, front; 2012-2018 BMW 650i xDrive, front; 2013-2018 BMW 650i xDrive Gran Coupe, front; 2010-2017 BMW 535i GT, front; 2011-2017 BMW 535i GT xDrive, front; 2012-2017 BMW 650i, front; 2011-2016 BMW 535i, front; 2011-2016 BMW 550i, front; 2011-2016 BMW 550i xDrive, front; 2011-2015 BMW 740i, front; 2015 BMW 740Ld xDrive, front; 2011-2015 BMW 740Li, front; 2013-2015 BMW 740Li xDrive, front; 2013-2015 BMW ActiveHybrid 7, front. Verify rotor style before ordering: some applications list both aluminum hat and full cast rotor designs. Follow OE service procedures, inspect calipers and slides, and replace the pad wear sensor where required by the vehicle application.
Quality Assurance
DFC rotors are 100% inspected for balance and critical attributes, and each rotor is backed by a 12-month warranty against defects in material and workmanship. Part number 4512-31060 is engineered for OE-style fit, form, and function in the listed BMW front brake applications.
Original: $342.54
-65%$342.54
$119.89Description
Front Brake Kit for BMW 650i, 535i, 550i
The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31060, is a front disc brake kit built for select BMW applications from 2010-2018. It combines coated rotors, low metallic pads, and brake hardware designed to restore braking performance, reduce noise, and simplify service.
Key Features
- DFC GEOSPEC coated front rotors with a dry, ready-to-install finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Premium rubber-steel-rubber shims for improved noise and vibration control
- Brake hardware kit with PTFE coating, vulcanized rubber, and stainless steel components
- OE-style rotor machining with non-directional finish for smoother pad bed-in
- Part number 4512-31060 for front axle service
Product Details
DFC designed this brake kit to address the wear items that affect stopping consistency over time. The coated rotors use a silver-gray corrosion-resistant finish and are processed dry, so there is no oil coating to clean before installation. The rotors are manufactured to G3000/G11H18 cast iron specifications, machined to tight tolerances, and inspected for balance and critical dimensions. The 5000 Advanced pads are post cured and scorched to reduce initial break-in requirements, while the included hardware kit helps replace fatigued or corroded brake hardware that can contribute to caliper movement, uneven wear, and noise. This kit is a practical choice for BMW 650i Gran Coupe, BMW 535i GT, BMW 550i xDrive, and other listed front axle applications where OE-style brake service is required.
What This Brake Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or weak hardware
- Reduced braking consistency from worn front rotors
- Longer service time caused by cleaning oil-coated rotors
- Premature rotor rust on exposed braking surfaces
Installation Notes
Fits 2013-2018 BMW 650i Gran Coupe, front; 2012-2018 BMW 650i xDrive, front; 2013-2018 BMW 650i xDrive Gran Coupe, front; 2010-2017 BMW 535i GT, front; 2011-2017 BMW 535i GT xDrive, front; 2012-2017 BMW 650i, front; 2011-2016 BMW 535i, front; 2011-2016 BMW 550i, front; 2011-2016 BMW 550i xDrive, front; 2011-2015 BMW 740i, front; 2015 BMW 740Ld xDrive, front; 2011-2015 BMW 740Li, front; 2013-2015 BMW 740Li xDrive, front; 2013-2015 BMW ActiveHybrid 7, front. Verify rotor style before ordering: some applications list both aluminum hat and full cast rotor designs. Follow OE service procedures, inspect calipers and slides, and replace the pad wear sensor where required by the vehicle application.
Quality Assurance
DFC rotors are 100% inspected for balance and critical attributes, and each rotor is backed by a 12-month warranty against defects in material and workmanship. Part number 4512-31060 is engineered for OE-style fit, form, and function in the listed BMW front brake applications.
