Dynamite Friction 4512-31058 Disc Brake Kit - Front
Brake Kit for BMW Front Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31058, is a front disc brake kit built for select BMW applications. It combines coated rotors, low metallic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial bed-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-31058 for front brake service on select BMW 550i GT, 750i, and 750Li models
Product Details
DFC designed this brake service kit to match OE requirements for durability, reliability, and stable braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a front brake job. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-31058 is a practical choice for BMW front brake maintenance where rotor finish, pad stability, and hardware condition all matter.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged clips or spring tension loss
- Longer stopping distances from worn friction material
- Brake vibration or harshness during everyday driving
Installation Notes and Fitment
Compatible with front brake service on select BMW applications. Fits 2010-2017 BMW 550i GT xDrive, front; Fits 2010-2015 BMW 550i GT, front; Fits 2009-2015 BMW 750i, front; Fits 2010-2015 BMW 750i xDrive, front; Fits 2009-2015 BMW 750Li, front; Fits 2010-2015 BMW 750Li xDrive, front. Fitment notes include original design aluminum hat rotors or optional full cast front rotors, depending on application. Verify rotor design and brake configuration before installation. Clean mating surfaces, inspect calipers and guide hardware, and follow the vehicle-specific bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Brake Kit for BMW Front Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31058, is a front disc brake kit built for select BMW applications. It combines coated rotors, low metallic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial bed-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-31058 for front brake service on select BMW 550i GT, 750i, and 750Li models
Product Details
DFC designed this brake service kit to match OE requirements for durability, reliability, and stable braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a front brake job. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-31058 is a practical choice for BMW front brake maintenance where rotor finish, pad stability, and hardware condition all matter.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged clips or spring tension loss
- Longer stopping distances from worn friction material
- Brake vibration or harshness during everyday driving
Installation Notes and Fitment
Compatible with front brake service on select BMW applications. Fits 2010-2017 BMW 550i GT xDrive, front; Fits 2010-2015 BMW 550i GT, front; Fits 2009-2015 BMW 750i, front; Fits 2010-2015 BMW 750i xDrive, front; Fits 2009-2015 BMW 750Li, front; Fits 2010-2015 BMW 750Li xDrive, front. Fitment notes include original design aluminum hat rotors or optional full cast front rotors, depending on application. Verify rotor design and brake configuration before installation. Clean mating surfaces, inspect calipers and guide hardware, and follow the vehicle-specific bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $372.69
-65%$372.69
$130.44Description
Brake Kit for BMW Front Applications
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Low Metallic and Hardware Kit, part number 4512-31058, is a front disc brake kit built for select BMW applications. It combines coated rotors, low metallic pads, and brake hardware in one service package for OE-style brake replacement.
Key Features
- DFC GEOSPEC coated front rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced low metallic brake pads with post-cured friction material
- Scorched pads for reduced initial bed-in time and stronger first-stop response
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bedding and smoother braking
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-31058 for front brake service on select BMW 550i GT, 750i, and 750Li models
Product Details
DFC designed this brake service kit to match OE requirements for durability, reliability, and stable braking performance. The coated rotors are processed dry and ready to install, which helps reduce prep time during a front brake job. The 5000 Advanced pads are formulated for consistent friction, while the included hardware kit addresses worn or corroded brake hardware that can contribute to noise, uneven wear, and caliper movement. This part number 4512-31058 is a practical choice for BMW front brake maintenance where rotor finish, pad stability, and hardware condition all matter.
What This Brake Kit Helps Address
- Front brake noise from worn pads or fatigued hardware
- Rust buildup on exposed rotor surfaces
- Uneven pad wear caused by aged clips or spring tension loss
- Longer stopping distances from worn friction material
- Brake vibration or harshness during everyday driving
Installation Notes and Fitment
Compatible with front brake service on select BMW applications. Fits 2010-2017 BMW 550i GT xDrive, front; Fits 2010-2015 BMW 550i GT, front; Fits 2009-2015 BMW 750i, front; Fits 2010-2015 BMW 750i xDrive, front; Fits 2009-2015 BMW 750Li, front; Fits 2010-2015 BMW 750Li xDrive, front. Fitment notes include original design aluminum hat rotors or optional full cast front rotors, depending on application. Verify rotor design and brake configuration before installation. Clean mating surfaces, inspect calipers and guide hardware, and follow the vehicle-specific bedding procedure after installation.
Quality Assurance
DFC GEOSPEC rotors are machined to tight tolerances, finished with a non-directional surface, and inspected for critical dimensions and balance. The rotors carry a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
