Dynamite Friction 4512-20061 Disc Brake Kit - Front
Front Brake Kit for Jaguar and Land Rover
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Jaguar F-Pace, Jaguar XE, and Land Rover Range Rover Velar applications. Part number 4512-20061 combines coated rotors, ceramic pads, and matching hardware for a complete front brake service.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-to-install coated rotors with a silver-gray corrosion-resistant finish
- Non-directional rotor finish for even pad bed-in and smoother braking
- Post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-20061 for front brake service on select 2017-2020 vehicles
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished dry, so they are ready for installation without rotor cleaning or prep. The 5000 Advanced ceramic pads are formulated for consistent friction, while the included hardware is designed to restore proper spring tension and caliper movement. This combination supports quieter operation, even wear, and OE-style braking performance on the front axle.
Compatible With 2019-2020 Jaguar F-Pace, front; 2020 Jaguar F-Pace 300 Sport Limited Edition, front; 2020 Jaguar F-Pace, front; 2017-2019 Jaguar XE 35T, front; 2018-2019 Jaguar XE, front; 2019-2020 Land Rover Range Rover Velar P340, front; and 2018-2019 Land Rover Range Rover Velar P380, front. Additional fitments include 2018 Jaguar F-Pace 30t, 35t, S, front and 2017 Jaguar F-Pace 35T, front.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from worn front rotors
- Longer brake service time caused by oil-coated replacement rotors
- Rust buildup on exposed rotor surfaces
Installation Notes
Use this kit for front axle brake service only. The rotors are shipped dry and ready to install, which can reduce prep time during the brake job. Inspect calipers, slides, and mounting points before assembly, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4512-20061 is intended for the listed Jaguar F-Pace, Jaguar XE, and Range Rover Velar front applications only.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the coated rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Front Brake Kit for Jaguar and Land Rover
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Jaguar F-Pace, Jaguar XE, and Land Rover Range Rover Velar applications. Part number 4512-20061 combines coated rotors, ceramic pads, and matching hardware for a complete front brake service.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-to-install coated rotors with a silver-gray corrosion-resistant finish
- Non-directional rotor finish for even pad bed-in and smoother braking
- Post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-20061 for front brake service on select 2017-2020 vehicles
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished dry, so they are ready for installation without rotor cleaning or prep. The 5000 Advanced ceramic pads are formulated for consistent friction, while the included hardware is designed to restore proper spring tension and caliper movement. This combination supports quieter operation, even wear, and OE-style braking performance on the front axle.
Compatible With 2019-2020 Jaguar F-Pace, front; 2020 Jaguar F-Pace 300 Sport Limited Edition, front; 2020 Jaguar F-Pace, front; 2017-2019 Jaguar XE 35T, front; 2018-2019 Jaguar XE, front; 2019-2020 Land Rover Range Rover Velar P340, front; and 2018-2019 Land Rover Range Rover Velar P380, front. Additional fitments include 2018 Jaguar F-Pace 30t, 35t, S, front and 2017 Jaguar F-Pace 35T, front.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from worn front rotors
- Longer brake service time caused by oil-coated replacement rotors
- Rust buildup on exposed rotor surfaces
Installation Notes
Use this kit for front axle brake service only. The rotors are shipped dry and ready to install, which can reduce prep time during the brake job. Inspect calipers, slides, and mounting points before assembly, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4512-20061 is intended for the listed Jaguar F-Pace, Jaguar XE, and Range Rover Velar front applications only.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the coated rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
Original: $347.30
-65%$347.30
$121.55Description
Front Brake Kit for Jaguar and Land Rover
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a front disc brake service kit built for select Jaguar F-Pace, Jaguar XE, and Land Rover Range Rover Velar applications. Part number 4512-20061 combines coated rotors, ceramic pads, and matching hardware for a complete front brake service.
Key Features
- Front disc brake kit with GEOSPEC coated rotors, 5000 Advanced ceramic pads, and hardware
- Dry-to-install coated rotors with a silver-gray corrosion-resistant finish
- Non-directional rotor finish for even pad bed-in and smoother braking
- Post-cured and scorched brake pads for stable friction and reduced initial break-in
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction
- Part number 4512-20061 for front brake service on select 2017-2020 vehicles
Product Details
DFC GEOSPEC coated rotors are machined to tight tolerances from G3000/G11H18 cast iron and finished dry, so they are ready for installation without rotor cleaning or prep. The 5000 Advanced ceramic pads are formulated for consistent friction, while the included hardware is designed to restore proper spring tension and caliper movement. This combination supports quieter operation, even wear, and OE-style braking performance on the front axle.
Compatible With 2019-2020 Jaguar F-Pace, front; 2020 Jaguar F-Pace 300 Sport Limited Edition, front; 2020 Jaguar F-Pace, front; 2017-2019 Jaguar XE 35T, front; 2018-2019 Jaguar XE, front; 2019-2020 Land Rover Range Rover Velar P340, front; and 2018-2019 Land Rover Range Rover Velar P380, front. Additional fitments include 2018 Jaguar F-Pace 30t, 35t, S, front and 2017 Jaguar F-Pace 35T, front.
What This Kit Helps Address
- Brake noise from worn pads or fatigued hardware
- Uneven pad wear caused by corroded or stressed hardware
- Reduced stopping consistency from worn front rotors
- Longer brake service time caused by oil-coated replacement rotors
- Rust buildup on exposed rotor surfaces
Installation Notes
Use this kit for front axle brake service only. The rotors are shipped dry and ready to install, which can reduce prep time during the brake job. Inspect calipers, slides, and mounting points before assembly, and follow the vehicle manufacturer’s bedding procedure after installation. Part number 4512-20061 is intended for the listed Jaguar F-Pace, Jaguar XE, and Range Rover Velar front applications only.
Quality Assurance
DFC states that each rotor is inspected for critical dimensions and balance, and the coated rotors carry a 12-month warranty against defects in material and workmanship. The brake pads are post-cured and scorched for stable friction performance, and the hardware kit is engineered to OE-style form, fit, and function.
